Ikelite 200DL Underwater Housing for Sony Alpha A7R III, A9 Mirrorless Cameras
SKU # ike.71473
Ikelite 200DL Housing for Sony A9 and A7Rlll
A full featured and durable waterproof housing for Sony Alpha A7R III and A9 Mirrorless cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
Required lens port, camera, and lens not included. Shown for illustrative purposes only. DL series lens port is required, not included.
Access to all important camera functions
Comfortable rubber grips
Glass optical viewfinder enhanced for underwater
Visible o-ring seals
Corrosion-proof solid body
Ports available for most popular lenses
Lens zoom gears included with housing
Rear View Control identification is laser engraved into the back of the housing.
200ft (60m) depth rating Made by divers in the USA
TTL Flash Exposure
The Ikelite 200 DL housing for Sony A9 as shipped supports manual flash control.
Ikelite DS strobes can be used in manual exposure mode when attached directly to the housing; single strobe #4103.41 or dual strobe #4103.42electrical synch cable. Ikelite DS strobes can be operated in TTL exposure with the addition of the optional ST1K TL kit #46040. Flash exposure compensation can be adjusted in the camera.
SEA&SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using either a single (#4118.1) or dual (#4118.2)Ikelite electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Top View A spare 1/2-20 threaded accessory port included.
A vacuum valve is included. With the optionalvacuum pump with gauge, the housing seal can be tested before diving to give you confidence that the system has been properly assembled and all o-rings are intact.
Right Side View With No Port Installed
Left Side View With No Port Installed
With Dome Port Installed (not included.)
Reliable performance A clear view of the camera and o-ring seals facilitates easy assembly and operation. Heavy-duty polycarbonate construction is durable and corrosion-free to ensure performance in even demanding conditions. Lens ports can be removed and replaced quickly with a simple positive locking system which provides visible assurance when the housing is assembled properly.
All important camera functions are accessible Controls are not provided for: focus mode dial, diopter adjustment control, focus mode dial lock release, multi-selector, media slot cover switch,