Ikelite TTL Housing for Olympus OM-D E-M10 Mark II
Camera, lens, port, are not included; shown for illustrative purposes only. A port is required.
Ikelite packed a lot in a small package, only slightly larger than the Olympus OM-D E-M10 Mark II camera, and just as comfortable to hold. Set up is a snap with simple, fully front-loaded camera installation.
Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.
Like every Ikelite product, this housing is designed, built and tested in the USA. Ikelite uses locally sourced materials. Ikelite housings are built by hand and individually tested for fit, function and waterproof integrity. Ikelite backs its products with over 50 years of experience and the best service in the dive industry.
200 ft (60m) depth rating
All important camera functions are accessible: control not provided for Fn3 button or viewfinder diopter adjustment
Ikelite bulkhead connector with built-in TTL circuitry
Slightly negative buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
Weight 3.3 lb (1497 g) not including tray, handles or port
Dimensions 6.4 x 7.5 x 5.3 in (163 x 190 x 135 mm) including projections
True TTL Exposure
Since the camera is talking directly to the strobe, the camera's built-in flash does not need to fire. This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession than with optical-based systems. When shooting a fast moving object, this make the difference between going home with the shot or just talking about it.
The camera's built-in flash is not usable in this installation.
DS50: yes, above serial number 70000
DS125: yes, above serial number 5000
Ikelite DS160: yes
Ikelite DS161: yes
DS200: yes, above serial number 7163
Sea & Sea strobes: yes, manual flash exposure only