Free 30 Day Membership to The Underwater Club with any purchase over $2000!

Ikelite DC 6 Inch Dome for Compact Housings (Choose Version)

Ikelite DC 6 Inch Dome for Compact Housings (Choose Version)

SKU # ike.6401

$350.00

Ikelite offers 4 different versions of this dome to truly take your underwater photography to the next level. When paired with its specific Ikelite housing and corresponding compact camera you greatly increase the camera's abilities underwater. Please be sure to check the compatibility chart or ask us to help you choose the right dome for your Ikelite housing.

DC1

The DC1 dome is designed for use with Ikelite housings that hold the Olympus TG1, TG2, TG3, TG4, and TG5 cameras.

This dome offers the best of everything: wide angle, macro, and over-under all on one dive. This special dome port is compatible with Ikelite housings for Olympus Tough TG-3, TG-4, and TG-5 digital cameras.

Wide angle, macro, and zoom

Underwater, the dome corrects for refraction to provide the full 25mm wide field of view. That's substantially wider than a flat port, which reduces the field of view to approximately 33mm. The dome supports full zoom through and you can still take advantage of the camera's fantastic microscope macro mode.

Over-unders

At the surface, the large dry dome gives you greater control to get a clean, smooth water line when shooting split shots (half-in, half-out of the water). This type of shot can be impossible to get with a flat port, and extremely difficult with a wet lens or dome where you're fighting double water lines. 

Ease of use

The dome replaces the standard port on the housing. Simply unthread the standard flat port and thread in the DC1 Dome unit. We recommend a rubber strap wrench commonly available at your local hardware store or as product # 0945.01 (not included). The included dome shade reduces reflections, protects the dome, and allows you to set the housing down on its face for easy assembly and disassembly. 

Compatibility

  • Ikelite Housing for Olympus Tough TG-1, TG-2 # 6233.01
  • Ikelite Housing for Olympus Tough TG-3, TG-4 # 6233.03 / 6233.04 / 6233.05
  • Ikelite Housing for Olympus Tough TG-5 # 6233.06 / 6233.07

 

DC2

The DC2 dome is designed for use with Ikelite housings that hold specific Canon and Sony compact cameras. See compatibility list below.

Want to shoot split shots (half-in, half-out of the water) with your compact digital system? Wet lenses will increase your angle of view but create a difficult double water line when used at the surface. The answer is a 6" diameter dry dome which lengthens and smoothes the waterline yet remains compact and lightweight for travel.

Underwater, the dry dome increases your angle of coverage significantly compared to a flat port with less edge distortion compared to a wet lens.

Wide angle and zoom

Underwater, the dome corrects for refraction to provide the full wide field of view. That's substantially wider than a flat port, which magnifies the image 1.33x and reduces the field of view. Approximately 3/4 of the camera's zoom range is usable with the dome installed.

Over-unders

At the surface, the large dry dome gives you greater control to get a clean, smooth water line when shooting split shots (half-in, half-out of the water). This type of shot can be impossible to get with a flat port, and extremely difficult with a wet lens or dome where you're fighting double water lines. 

Ease of use

The dome replaces the standard port on the housing. Simply unthread the standard flat port and thread in the DC2 Dome unit. We recommend a rubber strap wrench commonly available at your local hardware store or as product # 0945.01 (not included). The included dome shade reduces reflections, protects the dome, and allows you to set the housing down on its face for easy assembly and disassembly. 

Compatibility

  • Ikelite Housing for Canon PowerShot G5X # 6146.05
  • Ikelite Housing for Canon PowerShot G7X # 6146.07
  • Ikelite Housing for Sony Cyber-shot RX100 Mark I # 6116.10
  • Ikelite Housing for Sony Cyber-shot RX100 Mark II # 6116.11
  • Ikelite Housing for Sony Cyber-shot RX100 Mark III # 6116.12
  • Ikelite Housing for Sony Cyber-shot RX100 Mark III, IV # 6116.14
  • Ikelite Housing for Sony Cyber-shot RX100 Mark III, IV, V # 6116.15 / 6116.16

 Recommended Accessory:

 

DC3

The DC3 dome is designed for use with Ikelite housings that hold specific Canon, Panasonic, and Sony compact cameras. See compatibility list below.

Want to shoot split shots (half-in, half-out of the water) with your compact digital system? Wet lenses will increase your angle of view but create a difficult double water line when used at the surface. The answer is a 6" diameter dry dome which lengthens and smoothes the waterline yet remains compact and lightweight for travel.

Underwater, the dry dome increases your angle of coverage significantly compared to a flat port. The dome exhibits much less edge distortion than an external wet wide angle lens.

Wide angle and zoom

Underwater, the dome corrects for refraction to provide the full wide field of view. That's substantially wider than a flat port, which magnifies the image 1.33x and reduces the field of view. Approximately 3/4 of the camera's zoom range is usable with the dome installed.

Over-unders

At the surface, the large dry dome gives you greater control to get a clean, smooth water line when shooting split shots (half-in, half-out of the water). This type of shot can be impossible to get with a flat port, and extremely difficult with a wet lens or dome where you're fighting double water lines. 

Ease of use

The dome replaces the standard port on the housing. Simply unthread the standard flat port and thread in the DC3 Dome unit. We recommend a rubber strap wrench commonly available at your local hardware store or as product # 0945.01 (not included). The included dome shade reduces reflections, protects the dome, and allows you to set the housing down on its face for easy assembly and disassembly. 

Compatibility

  • Ikelite Housing for Canon PowerShot G16 TTL # 6146.17
  • Ikelite Housing for Canon PowerShot SX620 # 6242.62
  • Ikelite Housing for Canon PowerShot SX700, SX710 # 6148.70
  • Ikelite Housing for Canon PowerShot SX720 # 6148.72
  • Ikelite Housing for Canon PowerShot SX730 # 6148.73
  • Ikelite Housing for Panasonic Lumix ZS100, TZ100 # 6170.10
  • Ikelite Housing for Panasonic Lumix ZS200, TZ200 # 6170.12
  • Ikelite Housing for Panasonic Lumix ZS50, TZ70 # 6170.50
  • Ikelite Housing for Panasonic Lumix ZS70, TZ90 # 6170.70
  • Ikelite Housing for Panasonic Lumix LX100 I, LX100 II # 6171.11
  • Ikelite Housing for Sony Cyber-shot HX50, HX60 # 6115.50
  • Ikelite Housing for Sony Cyber-shot HX80, HX90, HX99, WX500 # 6115.90
  • Ikelite Housing for Sony Cyber-shot RX100 Mark VI # 6116.17 / 6116.18

 Recommended Accessory:

 

DC4

The DC4 dome is designed for use with Ikelite housings that hold specific Canon, Olympus, Panasonic, and Sony compact cameras. See compatibility list below.

Want to shoot split shots (half-in, half-out of the water) with your compact digital system? Wet lenses will increase your angle of view but create a difficult double water line when used at the surface. The answer is a 6" diameter dry dome which lengthens and smoothes the waterline yet remains compact and lightweight for travel.

Underwater, the dry dome increases your angle of coverage significantly compared to a flat port. The dome exhibits much less edge distortion than an external wet wide angle lens.

Wide angle and zoom

Underwater, the dome corrects for refraction to provide the full wide field of view. That's substantially wider than a flat port, which magnifies the image 1.33x and reduces the field of view. Approximately 3/4 of the camera's zoom range is usable with the dome installed.

Over-unders

At the surface, the large dry dome gives you greater control to get a clean, smooth water line when shooting split shots (half-in, half-out of the water). This type of shot can be impossible to get with a flat port, and extremely difficult with a wet lens or dome where you're fighting double water lines. 

Ease of use

The dome replaces the standard port on the housing. Simply unthread the standard flat port and thread in the DC4 Dome unit. We recommend a rubber strap wrench commonly available at your local hardware store or as product # 0945.01 (not included). The included dome shade reduces reflections, protects the dome, and allows you to set the housing down on its face for easy assembly and disassembly. 

Compatibility

  • Ikelite Action Housing for Canon PowerShot G7X # 6245.07
  • Ikelite Action Housing for Canon PowerShot G7X Mark II # 6245.08
  • Ikelite Housing for Canon PowerShot G7X Mark II # 6146.08
  • Ikelite Housing for Canon PowerShot G1X Mark III # 6146.18
  • Ikelite Housing for Olympus Stylus 1s # 6139.51
  • Ikelite Housing for Panasonic Lumix LX10 # 6171.01
  • Ikelite Action Housing for Sony Cyber-shot RX100 I, RX100 II # 6215.02
  • Ikelite Action Housing for Sony Cyber-shot RX100 III, RX100 IV # 6215.04

 Recommended Accessory:

 

Specifications for all 4 Versions

Acetyl body with acrylic dome

13 oz (376 g)

5.75" diameter x 3.25" (146 x 83 mm)

 

In the Box

Dome Port

Dome Shade # 5516.05 (installed)

O-ring # 0119.2 (installed)

Neoprene cover # 0200.1

Silicone lubricant 1cc tube