Sea & Sea MDX-a7II for Sony a7 II

SKU # ss.06176


Sea & Sea MDX-a7II for Sony a7 II

Camera, lens, port, not included; shown for illustrative purposes only.

The Sea & Sea Optical YS Converter / S1 can be installed in this housing.  SONY's shoe adapter "ADP-MAA" is required to use the converter.

The Optical YS Converter/S1 for MDX housing converts the camera’s TTL signal to a light signal.  Both TTL and manual strobe photography is possible using a Fiber-Optic Cable II.

Optical Viewfinder 0.5x is standard.  Adding an optional VF180 or VF45 viewfinder increases magnification by 1.2x and provides a full field of view.  Some vignetting will occur.

The housing is not equipped with a strobe connector when shipped from the factory.  Use Fiber-optic Cable(s) when connecting external strobe(s).  Optional Sync Cord 2-pin Connector is required if you wish to use electrical sync cable.

  • The port lock can be operated from outside the housing.
  • Built-in leak sensor.
  • Depth rating = 100m / 330ft
  • Dimensions  325 x 160 x 104mm / 12.8 x 6.3 x 4.1 inches
  • Weight approximately 2,250g / 79.4oz.,  - Without handles: 1,860g / 65.6oz, not including camera or port.

Sea & Sea NX ports and extension rings can be used with this housing by adding the optional Sea and Sea #30126 ML-NX Conversion Ring 30.