The Neo Blue Light emits a unique blue light frequency to excite proteins in many marine subject to create unique florescent video and photo opportunities.
| Output: |
3600mW |
| Burn Time (high power): |
90 min. |
| Beam Angle: |
100° |
| Charge Time: |
2 hours max |
| Swappable Battery: |
Yes |
| Battery Capacity: |
3,100 mAh |
| Adjustment: |
1% or 25% steps |
| Depth Rating: |
100 meters |
| Size: |
W53 x H57 x L110mm |
| Weight: |
355g Air |
| Mounts Included: |
YS, Ball, Locline |
Controls:
Three buttons give total control of the light. Press the round button to power the light on. Press again to cycle between 100%, 75%, 50%, and 25% power. Hold the button to turn the light off. The right and left buttons can be used to increase and decrease the light output in 1% increments. There is also a switch to lock the light off for travel
Pushing the power button at the same time as the left or right button will activate SOS or flashing modes for emergency use.
Battery:
The Neo lights can be charged two ways; conveniently through the back of the light leaving the Neo sealed or by removing the battery to charge independently. Charge one set of batteries while you're using another set. Swap batteries between dive to keep shooting throughout your day. The light module and battery are sealed independently and are water resistant.
Surface Use:
The Neo can be used on the surface. It has an automatic power reduction mode when the light gets hot so you do not have to worry about damaging the light while preparing for a night dive, or after getting out of the water.
Fix White Phosphor Filter is Included.
Opening the unit to swap batteries can require a strong grip. The Fix Neo Opener Tool provides a great deal of leverage, making this task quite easy.
