{"title":"Ikelite Housings","description":"","products":[{"product_id":"ikelite-200dl-housing-for-nikon-d750","title":"Ikelite 200DL Housing for Nikon D750","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite 200DL Housing for Nikon D750\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRequired lens port, camera, and lens not included.  Shown for illustrative purposes only.  DL series lens port is required, not included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to all important camera functions\u003c\/li\u003e\n\u003cli\u003eComfortable rubber grips\u003c\/li\u003e\n\u003cli\u003eGlass optical viewfinder enhanced for underwater\u003c\/li\u003e\n\u003cli\u003eVisible o-ring seals\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof solid body\u003c\/li\u003e\n\u003cli\u003ePorts available for most popular lenses\u003c\/li\u003e\n\u003cli\u003eLens zoom gears included with housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e \u003cbr\u003eControl identification is laser engraved into the back of the housing.\u003c\/div\u003e\n\u003cp\u003e200ft (60m) depth rating\u003cbr\u003eMade by divers in the USA\u003c\/p\u003e\n\u003ch3\u003eTTL Flash Exposure\u003c\/h3\u003e\n\u003cp\u003eThe Ikelite 200 DL housing for Nikon D750 as shipped supports manual flash control. \u003c\/p\u003e\n\u003cp\u003eAdd the optional Ikelite NT2 Nikon TTL Hotshoe, #46064, Nikon TTL Converter with Ikelite Plug #4301.3, and a compatible Ikelite DS stobe for excellent, true, TTL flash control.  Flash exposure compensation can be adjusted in the camera.\u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using either a single (#4118.1) or dual (#4118.2) Ikelite electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003cbr\u003eVacuum System\u003c\/p\u003e\n\u003cp\u003eA vacuum valve is included.  With the optional vacuum pump with gauge, the housing seal can be tested before diving to give you confidence that the system has been properly assembled and all o-rings are intact.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eA clear view of the camera and o-ring seals facilitates easy assembly and operation.  Heavy-duty polycarbonate construction is durable and corrosion-free to ensure performance in even demanding conditions.  Lens ports can be removed and replaced quickly with a simple positive locking system which provides visible assurance when the housing is assembled properly.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ctable width=\"490\" cellpadding=\"5\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"30%\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAll important camera functions are accessible\u003cbr\u003eControls are not provided for: release mode dial lock release, AF mode button, focus mode selector, Pv button, Fn button, diopter adjustment control, focus selector lock, Eyepiece shutter lever, sub-selector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e234mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e183mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e168mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.2kg without tray \u0026amp; handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd valign=\"top\"\u003e60 meter (200 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuoyancy\u003c\/th\u003e\n\u003ctd\u003eSlightly negative in freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd\u003e200ft (60m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuilt-in Flash\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrobe Connection\u003c\/th\u003e\n\u003ctd\u003eIkelite digital TTL electrical bulkhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Mounting\u003c\/th\u003e\n\u003ctd\u003e1\/4-20 thread with 3.5in spacing (76mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with left quick release handle\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eZoom gear retainer\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; push button tip accessory package\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7207927939115,"sku":"ike.71007","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71007.jpg?v=1574012353"},{"product_id":"ikelite-slr-dc-housing-for-canon-70d","title":"Ikelite SLR-DC Housing for Canon 70D","description":"\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eUnleash your creativity with options for macro, zoom and wide angle lenses.\u003cbr\u003e\u003cbr\u003eAn over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.\u003cbr\u003e\u003cbr\u003eNOTE: A lens port is required for waterproof operation.\u003c\/p\u003e\n\u003cdiv\u003eAll important camera functions. Controls are not provided for Dioptric Adjustment Knob, Flash \"Pop Up\" Button, Multi-Function Lock Switch, Depth-of-Field Preview Button.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eWidth 10 in (254 mm) including controls\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHeight 6.9 in (175 mm) including controls\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDepth 6.5 in (165 mm) including controls\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eNear neutral buoyancy in fresh water, depending on lens port and lens\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDepth Rating  200 ft (60 m)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eWeight  5.5 lb (2.5 kg)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eUse Built-in Flash  No\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eStrobe Connection Ikelite Digital TTL ICS-5 5-pin Electrical Bulkhead\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eTray Mounting 12-24 thread with 3 in spacing (76 mm)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eMain O-Ring  0132.61\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003ePort O-Ring   0105\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIkelite Housing\u003cbr\u003eTray with Dual Release Handles\u003cbr\u003ePort Hole Cap\u003cbr\u003eWaterproof Bulkhead Cap\u003cbr\u003e(2) Universal Zoom Sets\u003cbr\u003eLens Cloth\u003cbr\u003eSilicone Lubricant\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eSpare Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e0184.2 Silicone Lubricant 2cc Re-closable Tube\u003cbr\u003e9104.5 Waterproof Bulkhead Cap\u003cbr\u003e9523.10 Mounting hardware 12-24 x 1\/2 in\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7208732950571,"sku":"ike.6870.70","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.6870.70.jpg?v=1574012353"},{"product_id":"ikelite-200dl-housing-for-canon-5d-mark-ii","title":"Ikelite 200DL Underwater Housing for Canon 5D Mark II DSLR","description":"\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system with a dive back rated to 60 meters \/ 200 feet. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum valve included.   \u003cstrong\u003eVacuum pump sold separately.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTTL circuitry sold separately.\u003c\/li\u003e\n\u003cli\u003eCamera and ports are not included; shown for illustrative purposes only.\u003c\/li\u003e\n\u003cli\u003eLens gears \u003cem\u003enot included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCanon 5D Mark II ONLY!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e The NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eExtra-large, soft-touch zoom knob; Zoom is accessible for many lenses using a unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; right-hand handle sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA; Individually inspected for fit and water pressure tested to 200' (60m)\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eControls provided:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003eZoom control (see port chart)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eRecord start\/stop button\u003c\/li\u003e\n\u003cli\u003eMain dial\u003c\/li\u003e\n\u003cli\u003eMode dial (lock release)\u003c\/li\u003e\n\u003cli\u003eMetering mode\/white balance button\u003c\/li\u003e\n\u003cli\u003eAF mode\/drive mode button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eINFO button\u003c\/li\u003e\n\u003cli\u003eCreative photo\/comparative playback button\u003c\/li\u003e\n\u003cli\u003eRATE button\u003c\/li\u003e\n\u003cli\u003eIndex\/magnify\/reduce button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eLive view shooting\/movie shooting switch\u003c\/li\u003e\n\u003cli\u003e* AE Lock button\u003c\/li\u003e\n\u003cli\u003eAF point selection button\u003c\/li\u003e\n\u003cli\u003eQuick control button\u003c\/li\u003e\n\u003cli\u003eSET Setting button\u003c\/li\u003e\n\u003cli\u003e[Q] Quick control dial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 200ft Back\u003c\/li\u003e\n\u003cli\u003eBase with left-hand quick release handle # 4077.67\u003c\/li\u003e\n\u003cli\u003ePorthole cap # 0200.92\u003c\/li\u003e\n\u003cli\u003eRear o-ring # 0132.61\u003c\/li\u003e\n\u003cli\u003eFront o-ring # 0132.45\u003c\/li\u003e\n\u003cli\u003eZoom gear retainer # 75900\u003c\/li\u003e\n\u003cli\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/li\u003e\n\u003cli\u003e1\/16\" Hex Key # 0945.16\u003c\/li\u003e\n\u003cli\u003e1\/8\" Hex Key # 0945.18\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight-Hand Quick Release Handle with Extension # 4077.02\u003c\/li\u003e\n\u003cli\u003eStraight Enhanced Magnified Viewfinder # 6890.2\u003c\/li\u003e\n\u003cli\u003e45° Magnified Viewfinder Type 3 # 6891.3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark II DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003ch3\u003eStrobe Options\u003c\/h3\u003e\n\u003cdiv\u003eTTL Exposure\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes.  Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNon-Ikelite Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIkelite Non-Digital Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiber Optic\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by an electrical sync cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemote Triggering\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord.  Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e60m (200 foot) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in freshwater\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight  2.2 kg (4.9 lb) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 241 x 180 x 165 mm (9.5 x 7.1 x 6.5\") including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0132.45 Front o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7212786974763,"sku":"ike.71700","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71700.jpg?v=1574012354"},{"product_id":"ikelite-200dl-housing-for-nikon-d850","title":"Ikelite 200DL Housing for Nikon D850","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite 200 Dry-Lock Housing for Nikon D850\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRequired lens port, camera, and lens not included.  Shown for illustrative purposes only.  DL series lens port is required, not included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to all important camera functions\u003c\/li\u003e\n\u003cli\u003eComfortable rubber grips\u003c\/li\u003e\n\u003cli\u003eGlass optical viewfinder enhanced for underwater\u003c\/li\u003e\n\u003cli\u003eVisible o-ring seals\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof solid body\u003c\/li\u003e\n\u003cli\u003ePorts available for most popular lenses\u003c\/li\u003e\n\u003cli\u003eLens zoom gears included with housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eRear View\u003cbr\u003eControl identification is laser engraved into the back of the housing.\u003c\/div\u003e\n\u003cp\u003e200ft (60m) depth rating\u003cbr\u003eMade by divers in the USA\u003c\/p\u003e\n\u003ch3\u003eTTL Flash Exposure\u003c\/h3\u003e\n\u003cp\u003eThe Ikelite 200 DL housing for Nikon D850 as shipped supports manual flash control. \u003c\/p\u003e\n\u003cp\u003eAdd the optional Ikelite NT2 Nikon TTL Hotshoe, #46061, Nikon TTL Converter with Ikelite Plug #4301.3, and a compatible Ikelite stobe for excellent, true, TTL flash control.\u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eTop View\u003c\/div\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eA vacuum valve is included.  With the optional vacuum pump with gauge, the housing seal can be tested before diving to give you confidence that the system has been properly assembled and all o-rings are intact.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRight Side View\u003cbr\u003eWith No Port Installed\u003c\/td\u003e\n\u003ctd\u003eLeft Side View\u003cbr\u003eWith No Port Installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eWith Dome Port Installed (not included.)\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eReliable performance\u003c\/strong\u003e\u003cbr\u003eA clear view of the camera and o-ring seals facilitates easy assembly and operation.  Heavy-duty polycarbonate construction is durable and corrosion-free to ensure performance in even demanding conditions.  Lens ports can be removed and replaced quickly with a simple positive locking system which provides visible assurance when the housing is assembled properly.\u003c\/p\u003e\n\u003ctable width=\"490\" cellpadding=\"5\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"30%\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAll important camera functions are accessible\u003cbr\u003eControls are not provided for: release mode dial lock release, AF mode button, focus mode selector, Pv button, Fn button, diopter adjustment control, focus selector lock, Eyepiece shutter lever, sub-selector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e231mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e178mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e165mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.2kg without tray \u0026amp; handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd valign=\"top\"\u003e60 meter (200 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuoyancy\u003c\/th\u003e\n\u003ctd\u003eSlightly negative in freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd\u003e200ft (60m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuilt-in Flash\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrobe Connection\u003c\/th\u003e\n\u003ctd\u003eIkelite digital TTL electrical bulkhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Mounting\u003c\/th\u003e\n\u003ctd\u003e12-24 thread with 3in spacing (76mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpare Parts\u003c\/th\u003e\n\u003ctd\u003e5020 Silicone lubricant in 4 1cc tubes\u003cbr\u003e5512.69 O-Ring kit\u003cbr\u003e0200.91 Housing body cap\u003cbr\u003e9104.5 Electrical bulkhead cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with left quick release handle\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eZoom grear retainer\u003c\/li\u003e\n\u003cli\u003e5509.27 Universal zoom set up to 2.8-inch diameter\u003c\/li\u003e\n\u003cli\u003e5509.28 Universal zoom set 2.8 to 3.0-inch diameter\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; push button tip accessory package\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7213468975147,"sku":"ike.71015","price":2195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71015.jpg?v=1574012354"},{"product_id":"ikelite-200dl-housing-for-canon-5d-mark-iii-mark-iv-5ds-5ds-r","title":"Ikelite 200DL Underwater Housing for Canon 5D Mark III, Mark IV, 5DS, 5DS R DSLR Cameras","description":"\u003cp\u003e\u003cstrong\u003eFeaturing the new Dry Lock (DL) port system with a dive back rated to 60 meters \/ 200 feet. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum valve included.   \u003cstrong\u003eVacuum pump sold separately.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTTL circuitry sold separately.\u003c\/li\u003e\n\u003cli\u003eCamera and ports are not included; shown for illustrative purposes only.\u003c\/li\u003e\n\u003cli\u003eLens gears \u003cem\u003enot included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe housing is\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-50dl-housing-for-canon-5d-mark-iii-mark-iv-5ds-5ds-r\"\u003e \u003c\/a\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-50dl-housing-for-canon-5d-mark-iii-mark-iv-5ds-5ds-r\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ealso available rated to only 50-foot depth\u003c\/a\u003e for those that will only need it for snorkeling, swimming pools, and other shallow applications.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCanon 5D Mark III\u003c\/li\u003e\n\u003cli\u003e5D Mark IV\u003c\/li\u003e\n\u003cli\u003e5DS\u003c\/li\u003e\n\u003cli\u003e5DS R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eExtra-large, soft-touch zoom knob; Zoom is accessible for many lenses using a unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eTwo spare 1\/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; right-hand handle sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA; Individually inspected for fit and water pressure tested to 200' (60m)\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eControls provided:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003eZoom control (see port chart)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eRecord start\/stop button\u003c\/li\u003e\n\u003cli\u003eMain dial\u003c\/li\u003e\n\u003cli\u003eMode dial (lock release)\u003c\/li\u003e\n\u003cli\u003eMetering mode\/white balance button\u003c\/li\u003e\n\u003cli\u003eAF mode\/drive mode button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eINFO button\u003c\/li\u003e\n\u003cli\u003eCreative photo \/ comparative playback button\u003c\/li\u003e\n\u003cli\u003eRATE button\u003c\/li\u003e\n\u003cli\u003eIndex\/magnify\/reduce button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eLive view shooting\/movie shooting switch\u003c\/li\u003e\n\u003cli\u003e* AE Lock button\u003c\/li\u003e\n\u003cli\u003eAF point selection button\u003c\/li\u003e\n\u003cli\u003eQuick control button\u003c\/li\u003e\n\u003cli\u003eSET Setting button\u003c\/li\u003e\n\u003cli\u003e[Q] Quick control dial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 200ft Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003ePort Hole Cap # 0200.92\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight-Hand Quick Release Handle with Extension # 4077.02\u003c\/li\u003e\n\u003cli\u003eStraight Enhanced Magnified Viewfinder # 6890.2\u003c\/li\u003e\n\u003cli\u003e45° Magnified Viewfinder Type 3 # 6891.3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003ch3\u003eStrobe Options\u003c\/h3\u003e\n\u003cdiv\u003eTTL Exposure\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes.  Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNon-Ikelite Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIkelite Non-Digital Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiber Optic\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by an electrical sync cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemote Triggering\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord.  Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e60m (200 foot) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in freshwater\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight  2.3 kg (5.1 lb) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 234 x 180 x 168 mm (9.2 x 7.1 x 6.6\") including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0132.45 Port o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0200.92 Housing body cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7215092072491,"sku":"ike.71702","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71702.jpg?v=1574012371"},{"product_id":"ikelite-200dl-housing-for-canon-6d-mark-ii","title":"Ikelite 200DL Housing for Canon 6D Mark II","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite 200DL Housing for Canon 6D Mark II\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRequired lens port, camera, and lens not included.  Shown for illustrative purposes only.  DL series lens port is required, not included.  Ikelite housings with Dry Lock (DL) port system are not compatible with legacy 4-lock (FL) ports.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to all important camera functions\u003c\/li\u003e\n\u003cli\u003eComfortable rubber grips\u003c\/li\u003e\n\u003cli\u003eGlass optical viewfinder enhanced for underwater\u003c\/li\u003e\n\u003cli\u003eVisible o-ring seals\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof solid body\u003c\/li\u003e\n\u003cli\u003ePorts available for most popular lenses\u003c\/li\u003e\n\u003cli\u003eLens zoom gears included with housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e200ft (60m) depth rating\u003cbr\u003eMade by divers in the USA\u003c\/p\u003e\n\u003ch3\u003eTTL Flash Exposure\u003c\/h3\u003e\n\u003cp\u003eThe Ikelite 200 DL housing for Canon 6D Mark II as shipped supports manual flash control. \u003c\/p\u003e\n\u003cp\u003eIkelite DS strobes can be used in manual exposure mode when attached directly to the housing;  single strobe #4103.41 or dual strobe #4103.42 electrical synch cable.\u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using either a single (#4118.1) or dual (#4118.2) Ikelite electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eA vacuum valve is included.  With the optional vacuum pump with gauge, the housing seal can be tested before diving to give you confidence that the system has been properly assembled and all o-rings are intact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliable performance\u003c\/strong\u003e\u003cbr\u003eA clear view of the camera and o-ring seals facilitates easy assembly and operation.  Heavy-duty polycarbonate construction is durable and corrosion-free to ensure performance in even demanding conditions.  Lens ports can be removed and replaced quickly with a simple positive locking system which provides visible assurance when the housing is assembled properly.\u003c\/p\u003e\n\u003ctable width=\"540\" cellpadding=\"5\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"25%\"\u003eControls\u003c\/td\u003e\n\u003ctd\u003eAll important camera functions are accessible.  Controls are not provided for: LCD illumination, depth of field preview, viewfinder diopter adjust, multi-function lock switch.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e234mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e180mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e168mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.2kg without tray \u0026amp; handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Rating\u003c\/td\u003e\n\u003ctd\u003e60 meter (200 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuoyancy\u003c\/td\u003e\n\u003ctd\u003enear neutral in freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth Rating\u003c\/td\u003e\n\u003ctd\u003e200ft (60m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in Flash\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrobe Connection\u003c\/td\u003e\n\u003ctd\u003eIkelite digital TTL electrical bulkhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTray Mounting\u003c\/td\u003e\n\u003ctd\u003e1\/4-20 thread with 3.5in spacing (76mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain O-Ring\u003c\/td\u003e\n\u003ctd\u003e0132.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort O-Ring\u003c\/td\u003e\n\u003ctd\u003e0132.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpare Parts\u003c\/td\u003e\n\u003ctd\u003e9104.5 Electrical bulkhead cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with left quick release handle\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eZoom grear retainer\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; push button tip accessory package\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7215105802283,"sku":"ike.71720","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71720-4.jpg?v=1574012371"},{"product_id":"ikelite-200dl-housing-for-sony-a9","title":"Ikelite 200DL Underwater Housing for Sony Alpha A7R III, A9 Mirrorless Cameras","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite 200DL Housing for Sony A9 and A7Rlll\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA full featured and durable waterproof housing for Sony Alpha A7R III and A9 Mirrorless cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/p\u003e\n\u003cp\u003eRequired lens port, camera, and lens not included.  Shown for illustrative purposes only.  DL series lens port is required, not included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to all important camera functions\u003c\/li\u003e\n\u003cli\u003eComfortable rubber grips\u003c\/li\u003e\n\u003cli\u003eGlass optical viewfinder enhanced for underwater\u003c\/li\u003e\n\u003cli\u003eVisible o-ring seals\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof solid body\u003c\/li\u003e\n\u003cli\u003ePorts available for most popular lenses\u003c\/li\u003e\n\u003cli\u003eLens zoom gears included with housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eRear View\u003cbr\u003eControl identification is laser engraved into the back of the housing.\u003c\/div\u003e\n\u003cp\u003e200ft (60m) depth rating\u003cbr\u003eMade by divers in the USA\u003c\/p\u003e\n\u003ch3\u003eTTL Flash Exposure\u003c\/h3\u003e\n\u003cp\u003eThe Ikelite 200 DL housing for Sony A9 as shipped supports manual flash control. \u003c\/p\u003e\n\u003cp\u003eIkelite DS strobes can be used in manual exposure mode when attached directly to the housing; \u003cspan\u003e \u003c\/span\u003esingle strobe #4103.41 or dual strobe #4103.42\u003cspan\u003e \u003c\/span\u003eelectrical synch cable.  Ikelite DS strobes can be operated in TTL exposure with the addition of the optional ST1K TL kit #46040.  Flash exposure compensation can be adjusted in the camera.\u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using either a single (#4118.1) or dual (#4118.2)\u003cspan\u003e \u003c\/span\u003eIkelite electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eTop View\u003cbr\u003eA spare 1\/2-20 threaded accessory port included.\u003c\/div\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eA vacuum valve is included.  With the optional\u003cspan\u003e \u003c\/span\u003evacuum pump with gauge, the housing seal can be tested before diving to give you confidence that the system has been properly assembled and all o-rings are intact.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRight Side View\u003cbr\u003eWith No Port Installed\u003c\/td\u003e\n\u003ctd\u003eLeft Side View\u003cbr\u003eWith No Port Installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eWith Dome Port Installed (not included.)\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eReliable performance\u003c\/strong\u003e\u003cbr\u003eA clear view of the camera and o-ring seals facilitates easy assembly and operation.  Heavy-duty polycarbonate construction is durable and corrosion-free to ensure performance in even demanding conditions.  Lens ports can be removed and replaced quickly with a simple positive locking system which provides visible assurance when the housing is assembled properly.\u003c\/p\u003e\n\u003ctable width=\"490\" cellpadding=\"5\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"30%\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003eAll important camera functions are accessible\u003cbr\u003eControls are not provided for: focus mode dial, diopter adjustment control, focus mode dial lock release, multi-selector, media slot cover switch,\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e229mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e183mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e168mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.3kg without tray \u0026amp; handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd valign=\"top\"\u003e60 meter (200 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuoyancy\u003c\/th\u003e\n\u003ctd\u003eSlightly negative in freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd\u003e200ft (60m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuilt-in Flash\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrobe Connection\u003c\/th\u003e\n\u003ctd\u003eIkelite digital TTL electrical bulkhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Mounting\u003c\/th\u003e\n\u003ctd\u003e1\/4-20 thread with 3.5in spacing (76mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpare Parts\u003c\/th\u003e\n\u003ctd\u003e9104.5 Electrical bulkhead cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with left quick release handle\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eZoom grear retainer\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; push button tip accessory package\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7215307063339,"sku":"ike.71473","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71473.jpg?v=1574012371"},{"product_id":"ikelite-200dl-housing-for-canon-7d-mark-ii","title":"Ikelite 200DL Underwater Housing for Canon EOS 7D Mark II DSLR Cameras","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, and port are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eThe single most important upgrade is Ikelite's long-awaited new Dry Lock (DL) port system.  This exciting new system is even more robust and even easier to assemble than our time-tested Four Lock (FL) system.  The new ports are lighter and more adaptable and can accommodate extremely large diameter lenses with ease.  If you're considering shooting professional quality lenses like the Canon EF 16-35mm Type II\/III or the Canon EF 11-24mm, then the DL system is essential.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips.  A large, soft-touch lobed knob on the side of the housing makes fine-tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using.  All are lightweight and affordable\u003c\/p\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water.  Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe.  Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel.  The use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.\u003c\/p\u003e\n\u003ch3\u003eStrobes\u003c\/h3\u003e\n\u003cp\u003eThis housing supports your choice of shooting all manual flash or adding TTL electronics depending on your application.  Ikelite's new modular electronics system allows the housing to be updated with future strobe communications products as they become available.  The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain.  Reliable locking connectors between the hot shoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003cp\u003eYou can still enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit # 46070 and a compatible Ikelite DS strobe.  Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003cp\u003eFiber optic only strobes are not compatible.  An external strobe must be connected by an electrical sync cord.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eControls\u003c\/h3\u003e\n\u003cp\u003eIn addition to the more ergonomic zoom control, we've also upgraded the all-important shutter and AF-ON levers to a more natural feeling curved design.  Both controls can optionally be extended using the Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eEven the push buttons have been redesigned to reduce weight and salt build-up.  The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is now front-loading for easy installation and removal.  A small mounting plate attaches to the bottom of the camera and secures in the front of the housing.  The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards.  The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask.  The viewfinder removes quickly and easily for the attachment of an optional Straight Enhanced Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3.\u003c\/p\u003e\n\u003cp\u003eOverall the housing is over 1\/2 pound lighter than its former FL counterpart housing model # 6871.08.  If you're shooting an 8\" diameter dome, you'll save an additional 1+3\/4 pounds by using the DL version instead.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing\u003c\/li\u003e\n\u003cli\u003eRear O-Ring # 0132.61\u003c\/li\u003e\n\u003cli\u003eFront O-Ring # 0132.45\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003ePort Hole Cover # 0200.92\u003c\/li\u003e\n\u003cli\u003eZoom Gear Retainer # 75900\u003c\/li\u003e\n\u003cli\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003e1\/16\" Hex Key # 0945.16\u003c\/li\u003e\n\u003cli\u003e1\/8\" Hex Key # 0945.18\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in freshwater\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 4.9 lb (2.2 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.5 x 7.1 x 6.5\" (241 x 180 x 165 mm) including projection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Rear o-ring\u003c\/li\u003e\n\u003cli\u003e0132.45 Front o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStrobe Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes, manual flash exposure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLike its predecessor and all of Ikelite housings, this product is made in the USA, individually inspected for fit, and water pressure tested to 60 meters \/ 200 feet.\u003c\/p\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7215515467819,"sku":"ike.71708","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ikelite.71708.jpg?v=1574012371"},{"product_id":"ikelite-200dl-underwater-housing-for-nikon-d810","title":"Ikelite 200DL Underwater Housing for Nikon D810","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite 200 DL Underwater Housing for Nikon D810\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, and lens port are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to all important camera functions\u003c\/li\u003e\n\u003cli\u003eCapable of electrical TTL strobe exposure\u003c\/li\u003e\n\u003cli\u003eComfortable rubber grips\u003c\/li\u003e\n\u003cli\u003eGlass optical viewfinder enhanced for underwater\u003c\/li\u003e\n\u003cli\u003eVisible o-ring seals\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof solid body\u003c\/li\u003e\n\u003cli\u003ePorts available for most popular lenses\u003c\/li\u003e\n\u003cli\u003eLens zoom gears included with housing\u003c\/li\u003e\n\u003cli\u003e200ft (60m) depth rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThis housings supports your choice of shooting all manual or adding a TTL converter depending on your application.  The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain.  Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL hotshoe or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003cp\u003eYou can still enjoy the fastest and most accurate TTL exposure on the market by adding the NT2 Nikon TTL hotshoe # 46064, Nikon TTL Converter with Ikelite plug # 4301.3, and a compatible Ikelite DS strobe.  Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water.  Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe.  Ikelite signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel.  Use of the vacuum valve requires a compatible\u003cspan\u003e \u003c\/span\u003eVacuum Pump with Gauge # 47011, sold separately.\u003c\/p\u003e\n\u003ch3\u003eHandling\u003c\/h3\u003e\n\u003cp\u003eControls are provided for every camera function except the metering selector, diopter adjustment control and flash pop-up button.  Shutter, video recording start\/stop, and a large zoom control knob can all be comfortably reached without removing your hands from the handles.  Comfortable rubberized grips provide quick-release attachment points for strobes and accessories.  The tray and handles may be removed from the housing for convenience in traveling.  The complete housing is neutral or slightly negative in freshwater depending on choice of lens port.\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eRequired Accessories\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIkelite Standard or Modular Lens Port\u003c\/strong\u003e\u003cbr\u003eA compatible Ikelite lens port is required for operation of this housing and must be purchased separately.  Lens ports vary based on length and type of lens.\u003c\/p\u003e\n\u003ch3\u003eRecommended Accessories\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIkelite DS-series Substrobes\u003c\/strong\u003e\u003cbr\u003eTake full advantage of our exclusive circuitry for true Nikon TTL metering by attaching a current model Ikelite DS Substrobe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSync Cords for Ikelite Substrobes\u003c\/strong\u003e\u003cbr\u003eAccepts Ikelite 4103.51 single or 4103.52 dual sync cord to attach an Ikelite DS Substrobe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSync Cords for non-Ikelite Substrobes\u003c\/strong\u003e\u003cbr\u003eAvailable to attach compatible Nikonos, Sea \u0026amp; Sea or Inon strobes. Non-Ikelite strobes disable the built-in TTL circuitry and provide manual flash exposure only. Optically triggered strobes are not compatible with this installation.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRight Side View\u003cbr\u003eWith Port Removed\u003c\/td\u003e\n\u003ctd\u003eLeft Side View\u003cbr\u003eWith Port Removed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eStrobe Options\u003c\/h3\u003e\n\u003cdiv\u003eTTL Exposure\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes.  Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNon-Ikelite Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIkelite Non-Digital Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiber Optic\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemote Triggering\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord.  Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eControls provided for all important camera controls that you might access underwater.\u003cbr\u003eControls are\u003cspan\u003e \u003c\/span\u003e\u003cem\u003enot\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eprovided for: release mode dial, release mode dial lock release, viewfinder diopter adjustment control, eyepiece shutter lever, Pv button, Fn button, Focus-mode selector, BKT button, Focus selector lock\u003c\/p\u003e\n\u003cp\u003eWeight 2.2 kg (4.9 pound) not included tray, handles, port, or camera.\u003c\/p\u003e\n\u003cp\u003eDimensions: 231 x 178 x 165mm  (9.1 x 7 x 6.5 inch)\u003c\/p\u003e\n\u003cp\u003eBuoyancy: slightly negative in freshwater\u003c\/p\u003e\n\u003cp\u003eDepth Rating: 60 meter  (200ft)\u003c\/p\u003e\n\u003cp\u003eBuilt-in Flash: no\u003c\/p\u003e\n\u003cp\u003eStrobe Connection Ikelite digital TTL electrical bulkhead\u003c\/p\u003e\n\u003cp\u003eTray Mounting    \u003cbr\u003e    1\/4-20 thread with 3.5 inch spacing\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with left hand quick release handle\u003c\/li\u003e\n\u003cli\u003eRear o-ring #0132.61\u003c\/li\u003e\n\u003cli\u003eFront o-ring #0132.45\u003c\/li\u003e\n\u003cli\u003ePort hole cover 0200.92\u003c\/li\u003e\n\u003cli\u003eZoom gear retainer #0945.06\u003c\/li\u003e\n\u003cli\u003eTool for zoom gear retainer #0945.06\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap 9104.5\u003c\/li\u003e\n\u003cli\u003e1\/16 inch hex key\u003c\/li\u003e\n\u003cli\u003e1\/8 inch hex key\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; pushbutton tip assortment #9249\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0132.45 Port o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7215538700331,"sku":"ike.71009","price":2195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71009.jpg?v=1574012371"},{"product_id":"ikelite-200dl-housing-for-canon-80d","title":"Ikelite 200DL Underwater Housing for Canon EOS 80D DSLR","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, and port are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system with a dive back rated to 60 meters \/ 200 feet. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum valve included.   \u003cstrong\u003eVacuum pump sold separately.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTTL circuitry sold separately.\u003c\/li\u003e\n\u003cli\u003eCamera and ports are not included; shown for illustrative purposes only.\u003c\/li\u003e\n\u003cli\u003eLens gears \u003cem\u003enot included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eCanon cameras are known for their great ergonomics.  Ikelite extended this plan underwater, providing larger controls and push buttons that are easy to access even with thick gloves.  Whenever possible, controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface.  Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use.  The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eThe front-loading camera mounting system makes installation and removal a breeze.  The camera mounting plate allows ready access to the battery and memory card and features a standard 1\/4-20 mounting point for attachment to a tripod topside.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eExtra-large, soft-touch zoom knob; Zoom is accessible for many lenses using a unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eTwo spare 1\/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; right-hand handle sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStrobe Options\u003c\/h3\u003e\n\u003cdiv\u003eThe Canon 80D built-in flash can not be popped up inside this housing.\u003cbr\u003e\u003cbr\u003eTTL Exposure\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes.  Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNon-Ikelite Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIkelite Non-Digital Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiber Optic\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFiber optic only strobes are not compatible with this installation.  An external strobe must be connected by an electrical sync cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemote Triggering\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord.  Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water.  Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe.  Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel.  The use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.\u003c\/p\u003e\n\u003cp\u003eThe single most important upgrade is Ikelite's long-awaited new Dry Lock (DL) port system.  This exciting new system is even more robust and even easier to assembly than the time-tested Four Lock (FL) system.  The new ports are lighter and more adaptable and can accommodate extremely large diameter lenses with ease.  If you're considering shooting professional quality lenses like the Canon EF 16-35mm Type II\/III or the Canon EF 11-24mm, then the DL system is essential.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips.  A large, soft-touch lobed knob on the side of the housing makes fine-tuned adjustments a breeze.  Zoom and focus gears differ depending on which lens you are using.  All are lightweight and affordable.  Refer to the DL System Port Chart to choose the correct gear.  Zoom gears sold separately.\u003c\/p\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably.  The DL port mount may be removed and replaced with old style port locks for legacy users with standard or modular ports from our Four Lock system.  This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly.  Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges.\u003c\/p\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing\u003c\/li\u003e\n\u003cli\u003eRear O-Ring # 0132.61\u003c\/li\u003e\n\u003cli\u003eFront O-Ring # 0132.45\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003ePort Hole Cover # 0200.92\u003c\/li\u003e\n\u003cli\u003eZoom Gear Retainer # 75900\u003c\/li\u003e\n\u003cli\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003e1\/16\" Hex Key # 0945.16\u003c\/li\u003e\n\u003cli\u003e1\/8\" Hex Key # 0945.18\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll important camera functions are accessible\u003c\/li\u003e\n\u003cli\u003eControls are not provided for: Diopter Adjustment Dial, Multi function lock switch, Flash button, Depth-of-field preview, AF area selection, LCD panel illumination button, AF operation selection button and Drive mode selection button, Metering mode selection button\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with manual flash hot shoe\u003c\/li\u003e\n\u003cli\u003eOptional TTL circuitry sold separately\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in freshwater\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.1 lb (2.3 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.1 x 7.1 x 6.5 inches (230 x 180 x 165 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIkelite Right-hand quick release handle with extension \u003c\/li\u003e\n\u003cli\u003eStraight Enhanced Magnified viewfinder # 6890.2\u003c\/li\u003e\n\u003cli\u003e45° magnified viewfinder Type 3 # 6891.3 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts List (not included)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Rear o-ring\u003c\/li\u003e\n\u003cli\u003e0132.45 Front o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7215636676651,"sku":"ike.71710","price":1895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71710.jpg?v=1574012372"},{"product_id":"ikelite-200dl-housing-for-nikon-d7100-or-d7200","title":"Ikelite 200DL Housing for Nikon D7100 or D7200","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite 200 Dry-Lock Housing for Nikon D7100 or D7200\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRequired lens port, camera, and lens not included.  Shown for illustrative purposes only.  DL series lens port is required, not included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to all important camera functions\u003c\/li\u003e\n\u003cli\u003eComfortable rubber grips\u003c\/li\u003e\n\u003cli\u003eGlass optical viewfinder enhanced for underwater\u003c\/li\u003e\n\u003cli\u003eVisible o-ring seals\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof solid body\u003c\/li\u003e\n\u003cli\u003ePorts available for most popular lenses\u003c\/li\u003e\n\u003cli\u003eLens zoom gears included with housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e200ft (60m) depth rating\u003cbr\u003eMade by divers in the USA\u003c\/p\u003e\n\u003ch3\u003eTTL Flash Exposure\u003c\/h3\u003e\n\u003cp\u003eThe Ikelite 200 DL housing for Nikon D7100 or D7200 as shipped supports manual flash control. \u003c\/p\u003e\n\u003cp\u003eAdd the optional Ikelite NT2 Nikon TTL Hotshoe, #46061, Nikon TTL Converter with Ikelite Plug #4301.3, and a compatible Ikelite stobe for excellent, true, TTL flash control.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eA vacuum valve is included.  With the optional vacuum pump with gauge, the housing seal can be tested before diving to give you confidence that the system has been properly assembled and all o-rings are intact.\u003c\/p\u003e\n\u003ch3\u003eErgonomic handling\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eControls are provided for every camera function except the Diopter Adjustment Control and Depth-of-field Preview Button.  Flash compensation with Ikelite DS Substrobes can be accessed conveniently through the housing with a large rear dial.  Shutter, video recording start\/stop, and a large zoom control knob can all be comfortably reached without removing your hands from the handles.  Comfortable rubberized grips provide quick-release attachment points for strobes and accessories.  The tray and handles may be removed from the housing for convenience in traveling. The complete housing is neutral or slightly negative in freshwater depending on choice of lens port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliable performance\u003c\/strong\u003e\u003cbr\u003eA clear view of the camera and o-ring seals facilitates easy assembly and operation.  Heavy-duty polycarbonate construction is durable and corrosion-free to ensure performance in even demanding conditions.  Lens ports can be removed and replaced quickly with a simple positive locking system which provides visible assurance when the housing is assembled properly.\u003c\/p\u003e\n\u003ctable width=\"490\" cellpadding=\"5\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"30%\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003e\n\u003cp\u003eAll important camera functions are accessible\u003cbr\u003eControls are not provided for Release Mode Dial Lock Release, AF Mode button, Focus Mode Selector, Pv Button, Fn Button, Diopter Adjustment Control, Focus Selector Lock\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e239mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e178mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e165mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.2kg without tray \u0026amp; handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuoyancy\u003c\/th\u003e\n\u003ctd\u003eSlightly negative in freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd\u003e200ft (60m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuilt-in Flash\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrobe Connection\u003c\/th\u003e\n\u003ctd\u003eIkelite digital TTL electrical bulkhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Mounting\u003c\/th\u003e\n\u003ctd\u003e\n\u003cp\u003e12-24 thread with 3in spacing (76mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpare Parts\u003c\/th\u003e\n\u003ctd\u003e\n\u003cp\u003e5020 Silicone lubricant in 4 1cc tubes\u003cbr\u003e5512.69 O-Ring kit\u003cbr\u003e0200.91 Housing body cap\u003cbr\u003e9104.5 Electrical bulkhead cap\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with left quick release handle\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eZoom grear retainer\u003c\/li\u003e\n\u003cli\u003e5509.27 Universal zoom set up to 2.8-inch diameter\u003c\/li\u003e\n\u003cli\u003e5509.28 Universal zoom set 2.8 to 3.0-inch diameter\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; push button tip accessory package\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7215797370923,"sku":"ike.71001","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71001.jpg?v=1574012372"},{"product_id":"ikelite-200dl-housing-for-nikon-d7500","title":"Ikelite 200DL Housing for Nikon D7500","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite 200 Dry-Lock Housing for Nikon D7500\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRequired lens port, camera, and lens not included.  Shown for illustrative purposes only.  DL series lens port is required, not included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to all important camera functions\u003c\/li\u003e\n\u003cli\u003eComfortable rubber grips\u003c\/li\u003e\n\u003cli\u003eGlass optical viewfinder enhanced for underwater\u003c\/li\u003e\n\u003cli\u003eVisible o-ring seals\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof solid body\u003c\/li\u003e\n\u003cli\u003ePorts available for most popular lenses\u003c\/li\u003e\n\u003cli\u003eLens zoom gears included with housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e200ft (60m) depth rating\u003cbr\u003eMade by divers in the USA\u003c\/p\u003e\n\u003ch3\u003eTTL Flash Exposure\u003c\/h3\u003e\n\u003cp\u003eThe Ikelite 200 DL housing for Nikon D7500 as shipped supports manual flash control. \u003c\/p\u003e\n\u003cp\u003eAdd the optional Ikelite NT2 Nikon TTL Hotshoe, #46061, Nikon TTL Converter with Ikelite Plug #4301.3, and a compatible Ikelite stobe for excellent, true, TTL flash control.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eA vacuum valve is included.  With the optional vacuum pump with gauge, the housing seal can be tested before diving to give you confidence that the system has been properly assembled and all o-rings are intact.\u003c\/p\u003e\n\u003ch3\u003eErgonomic handling\u003c\/h3\u003e\n\u003cp\u003eControls are provided for every camera function except the Diopter Adjustment Control and Depth-of-field Preview Button.  Flash compensation with Ikelite DS Substrobes can be accessed conveniently through the housing with a large rear dial.  Shutter, video recording start\/stop, and a large zoom control knob can all be comfortably reached without removing your hands from the handles.  Comfortable rubberized grips provide quick-release attachment points for strobes and accessories.  The tray and handles may be removed from the housing for convenience in traveling. The complete housing is neutral or slightly negative in freshwater depending on choice of lens port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliable performance\u003c\/strong\u003e\u003cbr\u003eA clear view of the camera and o-ring seals facilitates easy assembly and operation.  Heavy-duty polycarbonate construction is durable and corrosion-free to ensure performance in even demanding conditions.  Lens ports can be removed and replaced quickly with a simple positive locking system which provides visible assurance when the housing is assembled properly.\u003c\/p\u003e\n\u003ctable width=\"490\" cellpadding=\"5\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"30%\"\u003eControls\u003c\/th\u003e\n\u003ctd\u003e\n\u003cp\u003eAll important camera functions are accessible.\u003cbr\u003eControls are \u003cstrong\u003enot\u003c\/strong\u003e provided for Release Mode Dial, release mode dial lock release, AF Mode button, Focus Mode Selector, Pv Button, Fn1 Button, Fn2 button, Diopter Adjustment Control, BKT button, Focus Selector Lock\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e234mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e183mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e168mm including controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.6kg without tray \u0026amp; handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuoyancy\u003c\/th\u003e\n\u003ctd\u003eSlightly negative in freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth Rating\u003c\/th\u003e\n\u003ctd\u003e200ft (60m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuilt-in Flash\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrobe Connection\u003c\/th\u003e\n\u003ctd\u003eIkelite digital TTL electrical bulkhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTray Mounting\u003c\/th\u003e\n\u003ctd\u003e\n\u003cp\u003e12-24 thread with 3in spacing (76mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePort O-Ring\u003c\/th\u003e\n\u003ctd\u003e0132.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpare Parts\u003c\/th\u003e\n\u003ctd\u003e\n\u003cp\u003e5020 Silicone lubricant in 4 1cc tubes\u003cbr\u003e5512.69 O-Ring kit\u003cbr\u003e0200.91 Housing body cap\u003cbr\u003e9104.5 Electrical bulkhead cap\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with left quick release handle\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eZoom gear retainer\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eZoom grear retainer\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; push button tip accessory package\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216018260011,"sku":"ike.71017","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Underwater-Housing-for-Nikon-D7500.jpg?v=1574012372"},{"product_id":"ikelite-200dlm-a-housing-for-canon-eos-m5","title":"Ikelite 200DLM\/A Housing for Canon EOS M5","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite SLR-DC Housing for Canon M5\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, and port, are not included; shown for illustrative purposes only.  Port is \u003cem\u003erequired\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eIkelite underwater housing for the Canon M5 mirrorless APS-C camera.\u003c\/p\u003e\n\u003cp\u003eThe two biggest advantages of shooting underwater with an interchangeable lens camera are the variety of great lenses available, and the ability to connect an external flash directly to the camera.  The Ikelite housing for the Canon EOS M5 is designed with these key points in mind to deliver a system that truly helps you take better photos in and under the water.\u003c\/p\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eA fast and reliable strobe connection is essential to getting the shot underwater. \u003c\/p\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Canon EOS M5 flash exposure protocol for the most accurate exposure possible.  The circuit is powered by Ikelite strobe for zero maintenance and no batteries to change.  Exposure compensation in TTL mode is supported using the camera's built-in control.  At this time, only Ikelite DS strobes are capable of powering the circuitry. \u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003cbr\u003e\u003cbr\u003eThis housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a light bulb, and the threaded fit prevents accidental detachment during use.  The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends.  A variety of sync cord terminations are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes for ultimate versatility.\u003c\/p\u003e\n\u003cp\u003eTwo fiber optic ports are built into the top of the housing provide an attachment point for fiber optic cords from most major manufacturers.  The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater.  Use of a fiber optic connector requires the camera's built-in flash to fire.\u003c\/p\u003e\n\u003ch3\u003eLens Support\u003c\/h3\u003e\n\u003cp\u003eThis housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses from Olympus and Panasonic.  Lens port is required and sold separately.\u003c\/p\u003e\n\u003ch3\u003eGreat Handling\u003c\/h3\u003e\n\u003cp\u003eControl symbols laser engraved into the back of the housing will never peel off or fade even with years of use.  The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003e The left side view of the housing shows the 1\/2-20 threaded accessory port.  This port allows for easy installation of the optional vacuum kit.  The vacuum kit allows you to test for proper assemly before your dive.\u003c\/p\u003e\n\u003cp\u003eIkelite is the only housing and lighting system for the Canon EOS M10 that is 100% designed, built, and tested in the USA.  The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFiber optic cord compatibility\u003c\/h3\u003e\nThe correct fiber optic sync cord will depend on the connector used by your strobe.\n\u003cul\u003e\n\u003cli\u003eINON Optical D Cable \"Non-wireless type\" L-Connector\u003c\/li\u003e\n\u003cli\u003eSea\u0026amp;Sea Fiber Optic Cable (L-type) Product No. 50107\u003c\/li\u003e\n\u003cli\u003eOlympus UW Fiber Optic Cable PTCB-E02\u003c\/li\u003e\n\u003cli\u003eNauticam Universal Fiber Optic Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eRear o-ring\u003c\/li\u003e\n\u003cli\u003eFront (port) o-ring\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eControl \u0026amp; pushbutton tip assortment\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDepth rating: 60 meter \/ 200 feet\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded mounts at 3 inch spacing on bottom\u003c\/li\u003e\n\u003cli\u003eWeight 1.3 kg \/ 2.9 pound\u003c\/li\u003e\n\u003cli\u003eDimensions 193 x 152 x 135 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216139436075,"sku":"ike.6973.05","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6973.05.jpg?v=1574012372"},{"product_id":"ikelite-compact-dslr-housing-for-canon-sl2-200d-white","title":"Ikelite Compact DSLR Housing for Canon SL2 \/ 200D, White","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Compact DSLR Housing for Canon SL2 \/ 200D\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera and lens are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eIkelite Dome Port #5516.15 and lens zoom gear #5515.11 are included.  This port and zoom gear are for the Canon 18-55mm f\/4-5.6 STM lens.\u003c\/p\u003e\n\u003ch2\u003eErgonomics\u003c\/h2\u003e\n\u003cp\u003eIkelite packed a lot in a small package, only slightly larger than the Canon SL2 \/ EOS 200D camera and just as comfortable to hold.  Set up is a snap with simple, fully front-loaded camera installation.  The camera mounting shoe is designed to be unobtrusive and allow changing of battery and memory cards, or attachment to a surface tripod without being removing the camera from the internal mount.  Shutter trigger is right at your fingertips whether holding the side of the housing or the \u003cspan\u003eoptional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-double-handle-tray-for-compact-digital-housings\" target=\"_blank\" rel=\"noopener noreferrer\"\u003edual tray with quick release handles\u003c\/a\u003e.  Controls are provided for camera functions except for the rear touchscreen, so you have creative control anywhere you go. For a system of this caliber, a tray with handle is essential to good handling, balance underwater, and attachment of external lighting.  The complete handle assembly removes with just two nuts for traveling. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eVacuum Leak Testing\u003c\/h3\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite Vacuum Kit for 1\/2 Inch Holes\u003c\/a\u003e.  A vacuum kit allows you to de-pressurize the housing to check for proper assembly prior to entering the water.\u003c\/p\u003e\n\u003ch2\u003eOptics\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThis housing comes standard with a optical grade acrylic dome port with zoom ring\u003c\/em\u003e.\u003c\/strong\u003e  This port provides sharp images and zoom capabilities with the Canon EF-S 18-55mm STM kit lens.  It can accomodate the popular \u003ca href=\"https:\/\/reefphoto.com\/products\/tokina-10-17mm-f-3-5-4-5-fisheye-for-canon\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTokina 10-17mm\u003c\/a\u003e lens with vignetting (dark shadows in the corners of the image) in the 10-12mm range when used the Tokina lens.  A special zoom gear system allows the \u003cem\u003ecamera with lens attached to be installed from the back of the housing, without requiring removal of the dome port.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe dome port may be removed without tools to attach the \u003cem\u003eoptional\u003c\/em\u003e \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-slr-flat-port\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite Flat Port for the Canon EF-S 60mm Macro\u003c\/a\u003e lens.  Simply loosen the securing thumb screws and slide the port off.  The optional Flat Port allows use of the 60mm Macro lens in auto-focus mode and features 67mm front threads for the optional attachment of macro converter wet lenses.\u003c\/p\u003e\n\u003ch2\u003eMaterials\u003c\/h2\u003e\n\u003cp\u003eSpecial polycarbonate blends allows Ikelite to create an extremely strong and lightweight enclosure.  Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, this housing is designed, built and tested in the USA.  Ikelite use locally sourced materials. Ikelite housings are built by hand and individually tested for fit, function and waterproof integrity.  Ikelite backs its products with over 50 years of experience and the best service in the dive industry.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003ctable cellspacing=\"2\" cellpadding=\"2\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eControls\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eAll camera controls except: rear touch screen, viewfinder diopter adjust, display button, wi-fi button, depth-of-field preview, flash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eBuoyancy\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eNearly neutral in salt water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eDepth Rating\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e200 ft (60 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eStrobe Connection\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eIkelite Digital TTL ICS-5 5-pin Electrical Bulkhead plus TTL circuitry compatible with current model Ikelite DS strobes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eUse Built-in Flash\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eHousing Dimensions\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e6 x 7.5 x 5.9 inch (191 x 150 x 152 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eWeight\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eSlightly negative in fresh water; actual buoyance determined by lens choice, port choice, fresh or salt water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eDome Port Dimensions\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e5 x 5.9 x 3.3 in (127 x 151 x 85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eHousing Weight\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e3 lb 3 oz (1.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eMain O-Ring\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-compact-housing-o-ring\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eike.0110\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eIncludes\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eHousing\u003cbr\u003e Tray with Quick Release Handle\u003cbr\u003e #9304.52 Dome Port with Zoom Sleeve\u003cbr\u003e Waterproof Bulkhead Cap\u003cbr\u003e Spare Port O-Ring\u003cbr\u003e Spare Thumbscrews\u003cbr\u003e Silicone Lubricant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eSpare Parts\u003cbr\u003e Not Included:\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-silicone-o-ring-lubricant-in-2cc-reclosable-tube\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite #0184.2 Silicone Lubricant 2cc Re-closable Tube\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/reefphoto.com\/products\/ikleite-9104-5-waterproof-bulkhead-cap\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite #9104.5 Waterproof Bulkhead Cap\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTrue TTL Exposure\u003c\/h2\u003e\n\u003cp\u003eTTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Unlike fiber optic systems, which attempt to copy the behavior of the camera's built-in flash, this unique housing for the Canon EOS 200D Rebel SL2 provides direct, electrical transmission of this TTL signal to the strobe*.\u003c\/p\u003e\n\u003cp\u003eSince the camera is talking directly to the strobe, the camera's built-in flash does not need to fire. This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession than with optical-based systems. When shooting a fast moving object, this make the difference between going home with the shot or just talking about it. Additionally, in-line communication between the strobe and the camera completely eliminates signal interference and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Viewfinders\u003c\/h3\u003e\n\u003cp\u003eThis housing is compatible with optional Ikelite \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-45-degree-magnified-viewfinder-for-dslr-and-compact-mil-housings-type-1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e45 Degree Magnified Viewfinder Type 1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIncluded:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eDome Port #5516.15\u003c\/li\u003e\n\u003cli\u003eNeoprene Port Cover #0200.1\u003c\/li\u003e\n\u003cli\u003eLens Zoom Gear #5515.11\u003c\/li\u003e\n\u003cli\u003eRear O-Ring #0110\u003c\/li\u003e\n\u003cli\u003eFront O-Ring #0132.36\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap #9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant for O-Ring #0184.2\u003c\/li\u003e\n\u003cli\u003e1 Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216345743403,"sku":"ike.6970.05","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6970.05.jpg?v=1574012372"},{"product_id":"ikelite-71005-housing-for-nikon-d500-with-dl-port-mount","title":"Discontinued - Ikelite 200DL Underwater Housing for Nikon D500 DSLR","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIkelite is introducing the NEW Dry Lock (DL) Port Mount on their housing for D500.  Building off of Ikelite popular port system for compact mirrorless cameras, they have re-designed and refined the concept and it's ready for the big leagues.\u003c\/p\u003e\n\u003cp\u003eDL Port Mount Features Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA unique exterior o-ring which prevents water from dripping onto your camera when the port is removed;\u003c\/li\u003e\n\u003cli\u003eSolid, sure-stop press fit with no threading, turning, or twisting of the ports or extensions;\u003c\/li\u003e\n\u003cli\u003eBuilt for reliability in remote locations with standard locking thumbscrews and no complex moving parts;\u003c\/li\u003e\n\u003cli\u003eAccommodates large diameter lenses with ease;\u003c\/li\u003e\n\u003cli\u003eA new compact 8\" dome port provides the optical quality of a large dome with the size of a much smaller dome—perfect for close-focus wide-angle work;\u003c\/li\u003e\n\u003cli\u003ePlus the new featherweight full 8\" dome is less than half the weight of its predecessor and several pounds lighter than the glass alternatives with nearly identical optical quality!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003eFor those photographers working\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eonly in pools or surf\u003c\/em\u003e, this housing is available in a slimmed-down, lighter weight, version\u003cspan\u003e \u003c\/span\u003e50 foot depth housing for Nikon D500\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtra-large, soft-touch zoom knob next to the left handle\u003c\/li\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eVacuum valve included;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003evacuum pump sold separately\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlash bulkhead connector for manual exposure with most popular underwater strobes\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eEach housing is individually inspected for fit and water pressure tested to 200' (60m)\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eLenses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccepts any Ikelite DL-series port to accommodate most popular zoom, macro, and wide-angle lenses\u003c\/li\u003e\n\u003cli\u003eZoom is accessible for many lenses with a specific lens gear\u003c\/li\u003e\n\u003cli\u003eDome ports are recommended for wide-angle and zoom lenses underwater\u003c\/li\u003e\n\u003cli\u003eFlat ports are recommended for macro close-up lenses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes\u003c\/li\u003e\n\u003cli\u003eOptional TTL hot shoe and Nikon TTL Converter (Ikelite number 4301.3) provide TTL operation with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eErgonomics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eSensitive new trigger lever is extendable for comfortable use when holding the optional right-hand quick release handle\u003c\/li\u003e\n\u003cli\u003eThe back is completely clear for an unobstructed view of the camera and o-ring seal\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eTwo spare 1\/2-20 threaded accessory mount locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eOptional Right-Hand Quick Release Handle with Extension, Ikelite # 4077.02, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eControls\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eMovie-record button\u003c\/li\u003e\n\u003cli\u003eSub-command dial\u003c\/li\u003e\n\u003cli\u003eExposure compensation (+\/-) button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eMODE button\u003c\/li\u003e\n\u003cli\u003eWB button\u003c\/li\u003e\n\u003cli\u003eMetering button\u003c\/li\u003e\n\u003cli\u003eBKT button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMain command dial\u003c\/li\u003e\n\u003cli\u003eMulti-selector\u003c\/li\u003e\n\u003cli\u003eInfo button\u003c\/li\u003e\n\u003cli\u003eLive view selector\u003c\/li\u003e\n\u003cli\u003eLv button\u003c\/li\u003e\n\u003cli\u003ei button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eTrash button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eKey\/? button\u003c\/li\u003e\n\u003cli\u003eMagnify + button\u003c\/li\u003e\n\u003cli\u003eMagnify - button\u003c\/li\u003e\n\u003cli\u003eOK button\u003c\/li\u003e\n\u003cli\u003eFn2 button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 200ft Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003ePort Hole Cap # 0200.92\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eOptional accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight-Hand Quick Release Handle with Extension #\u003cspan\u003e \u003c\/span\u003e4077.02\u003c\/li\u003e\n\u003cli\u003eStraight Enhanced Magnified Viewfinder #\u003cspan\u003e \u003c\/span\u003e6890.2\u003c\/li\u003e\n\u003cli\u003e45° Magnified Viewfinder Type 3 #\u003cspan\u003e \u003c\/span\u003e6891.3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with the Nikon D500 DSLR as shipped by the manufacturer.  Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other Nikon DSLR models from being used in this housing.  We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in freshwater\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.1 lb (2.3 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.2 x 7.1 x 6.6\" (234 x 180 x 168 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0105 Port o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0200.92 Housing body cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216382705707,"sku":"ike.71005","price":1895.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.71005.jpg?v=1574012372"},{"product_id":"ikelite-housing-200dlm-b-for-olympus-om-d-e-m1-mark-ii","title":"Ikelite Housing 200DLM\/B for Olympus OM-D E-M1 Mark II","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Housing 200DLM\/B for Olympus OM-D E-M1 Mark II\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, port, are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eThis compact housing packs in all of our latest upgrades to controls and ergonomics. The shutter lever has been updated to a more sensitive and natural feeling curved design. The standard control hugs the side of the housing for comfortable use when hand holding. It can be easily extended using the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-shutter-trigger-lever-extension\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eShutter Trigger Extension\u003c\/a\u003e to put it within easy reach when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eThe AEL\/AFL button is accessed by a lever placed right where your thumb is for quick access to back button focus. This popular technique is especially handy for shooting small or fast moving subjects.  Less often accessed controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface.\u003c\/p\u003e\n\u003cp\u003eEven our push buttons have been redesigned to reduce weight and salt build-up.  The video record start\/stop button is bright red anodized so that you never miss the action.  The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's electronic viewfinder when viewed through a dive mask.  The viewfinder removes quickly and easily for the attachment of an optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-45-degree-magnified-viewfinder-for-dslr-and-compact-mil-housings-type-1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e45° Magnified Viewfinder Type 1\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal.  A small mounting plate attaches to the bottom of the camera and secures in the front of the housing.  The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards.  The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Olympus O-MD E-M1 Mark II flash exposure protocol for the most accurate exposure possible.  The circuit is powered by the strobe for zero maintenance and no batteries to change.  Exposure compensation in TTL mode is supported using the camera's built-in control.  At this time, only Ikelite DS strobes are capable of powering the circuitry.  SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eThis housing provides a direct electrical connection to the camera's external flash hot shoe.  Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use.  The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends.  A variety of sync cord terminations are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes for ultimate versatility.\u003c\/p\u003e\n\u003cp\u003eThe Olympus OM-D E-M1 Mark II camera does not feature a built-in flash.  Triggering of fiber optic strobes is not supported at this time.  A strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system.  Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.\u003c\/p\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly.  Ikelite has eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris.  Two double-passivated stainless steel locking lid snaps are simple to use.  The clear back allows you to see the o-ring form a solid, watertight seal as it closes.\u003c\/p\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite 1\/2 inch Vacuum Kit\u003c\/a\u003e.  A vacuum kit allows you to test the housingfor proper assembly prior to entering the water.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts a variety Ikelite DLM Ports to accommodate all of the most popular zoom, macro, and wide angle lenses.  Ikelite custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.\u003c\/p\u003e\n\u003ch3\u003eIncludes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eHousing Rear O-Ring # 0110\u003c\/li\u003e\n\u003cli\u003eHousing Front O-Ring # 0132.36\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249.3\u003c\/li\u003e\n\u003cli\u003e1\/8\" Hex Key # 0945.18\u003c\/li\u003e\n\u003cli\u003eLubricant # 0184.1\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePort is not included and is required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eDLM Type B port mount\u003c\/li\u003e\n\u003cli\u003eControls for all important camera functions; controls are not provided for Diopter Adjustment Control, One Touch White Balance Button, Preview Button, or Mode Dial Lock\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded tray mounts with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water.  Actual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3.3 pounds (1.5 kg) not including port\u003c\/li\u003e\n\u003cli\u003eDimensions  193 x 150 x 150 mm (7.6 x 5.9 x 5.9 inch) including projections\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216426844203,"sku":"ike.6952.02","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6952.02.jpg?v=1574012372"},{"product_id":"ikelite-housing-200dlm-b-for-panasonic-g80-g85","title":"Ikelite Housing 200DLM\/B for Panasonic G80 G85","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Housing 200DLM\/B for Panasonic G80, G85\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, port, are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eThis compact housing packs in all of our latest upgrades to controls and ergonomics. The shutter lever has been updated to a more sensitive and natural feeling curved design. The standard control hugs the side of the housing for comfortable use when hand holding. It can be easily extended using the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-shutter-trigger-lever-extension\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eShutter Trigger Extension\u003c\/a\u003e to put it within easy reach when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eThe AEL\/AFL button is accessed by a lever placed right where your thumb is for quick access to back button focus. This popular technique is especially handy for shooting small or fast moving subjects.  Less often accessed controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface.\u003c\/p\u003e\n\u003cp\u003eEven our push buttons have been redesigned to reduce weight and salt build-up.  The video record start\/stop button is bright red anodized so that you never miss the action.  The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's electronic viewfinder when viewed through a dive mask.  The viewfinder removes quickly and easily for the attachment of an optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-45-degree-magnified-viewfinder-for-dslr-and-compact-mil-housings-type-1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e45° Magnified Viewfinder Type 1\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal.  A small mounting plate attaches to the bottom of the camera and secures in the front of the housing.  The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards.  The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Panasonic G80 and G85 flash exposure protocol for the most accurate exposure possible.  The circuit is powered by the strobe for zero maintenance and no batteries to change.  Exposure compensation in TTL mode is supported using the camera's built-in control.  At this time, only Ikelite DS strobes are capable of powering the circuitry.  SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eThis housing provides a direct electrical connection to the camera's external flash hot shoe.  Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use.  The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends.  A variety of sync cord terminations are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes for ultimate versatility.\u003c\/p\u003e\n\u003cp\u003eTriggering of fiber optic strobes is not supported.  A strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system.  Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.\u003c\/p\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly.  Ikelite has eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris.  Two double-passivated stainless steel locking lid snaps are simple to use.  The clear back allows you to see the o-ring form a solid, watertight seal as it closes.\u003c\/p\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite 1\/2 inch Vacuum Kit\u003c\/a\u003e.  A vacuum kit allows you to test the housingfor proper assembly prior to entering the water.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts a variety Ikelite DLM Ports to accommodate all of the most popular zoom, macro, and wide angle lenses.  Ikelite custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.\u003c\/p\u003e\n\u003ch3\u003eIncludes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eHousing Rear O-Ring # 0110\u003c\/li\u003e\n\u003cli\u003eHousing Front O-Ring # 0132.36\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249.3\u003c\/li\u003e\n\u003cli\u003e1\/8\" Hex Key # 0945.18\u003c\/li\u003e\n\u003cli\u003eLubricant # 0184.1\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePort is not included and is required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eDLM Type B port mount\u003c\/li\u003e\n\u003cli\u003eControls for all important camera functions; controls are not provided for Diopter Adjustment Control, One Touch White Balance Button, Preview Button, or Mode Dial Lock\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded tray mounts with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water.  Actual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight is 1.5 kg (3.3 pounds) not including port\u003c\/li\u003e\n\u003cli\u003eDimensions  193 x 150 x 150 mm (7.6 x 5.9 x 5.9 inch) including projections\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216491823147,"sku":"ike.6961.08","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6961.08.jpg?v=1574012373"},{"product_id":"ikelite-compact-dslr-housing-for-canon-sl1-100d-white","title":"Ikelite Compact DSLR Housing for Canon SL1 \/ 100D, White","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Compact DSLR Housing for Canon SL1 \/ 100D\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera and lens are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eDome port is included !\u003c\/p\u003e\n\u003ch2\u003eErgonomics\u003c\/h2\u003e\n\u003cp\u003eIkelite packed a lot in a small package, only slightly larger than the Canon SL1 EOS 100D camera and just as comfortable to hold.  Set up is a snap with simple, fully front-loaded camera installation.  The camera mounting shoe is designed to be unobtrusive and allow changing of battery and memory cards, or attachment to a surface tripod without being removing the camera from the internal mount.  Shutter trigger is right at your fingertips whether holding the side of the housing or the \u003cspan\u003eoptional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-double-handle-tray-for-compact-digital-housings\" target=\"_blank\" rel=\"noopener noreferrer\"\u003edual tray with quick release handles\u003c\/a\u003e.  Controls are provided for camera functions except for the rear touchscreen, so you have creative control anywhere you go. For a system of this caliber, a tray with handle is essential to good handling, balance underwater, and attachment of external lighting.  The complete handle assembly removes with just two nuts for traveling. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eOptics\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThis housing comes standard with a optical grade acrylic dome port with zoom ring\u003c\/em\u003e.\u003c\/strong\u003e  This port provides sharp images and zoom capabilities with the Canon EF-S 18-55mm STM kit lens.  It can accomodate the popular \u003ca href=\"https:\/\/reefphoto.com\/products\/tokina-10-17mm-f-3-5-4-5-fisheye-for-canon\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTokina 10-17mm\u003c\/a\u003e lens with vignetting (dark shadows in the corners of the image) in the 10-12mm range when used the Tokina lens.  A special zoom gear system allows the \u003cem\u003ecamera with lens attached to be installed from the back of the housing, without requiring removal of the dome port.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe dome port may be removed without tools to attach the \u003cem\u003eoptional\u003c\/em\u003e \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-slr-flat-port\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite Flat Port for the Canon EF-S 60mm Macro\u003c\/a\u003e lens.  Simply loosen the securing thumb screws and slide the port off.  The optional Flat Port allows use of the 60mm Macro lens in auto-focus mode and features 67mm front threads for the optional attachment of macro converter wet lenses.\u003c\/p\u003e\n\u003ch2\u003eMaterials\u003c\/h2\u003e\n\u003cp\u003eSpecial polycarbonate blends allows Ikelite to create an extremely strong and lightweight enclosure.  Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, this housing is designed, built and tested in the USA.  Ikelite use locally sourced materials. Ikelite housings are built by hand and individually tested for fit, function and waterproof integrity.  Ikelite backs its products with over 50 years of experience and the best service in the dive industry.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003ctable cellspacing=\"2\" cellpadding=\"2\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eControls\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eAll camera controls except rear touch screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eBuoyancy\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eNearly neutral in salt water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eDepth Rating\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e200 ft (60 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eStrobe Connection\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eIkelite Digital TTL ICS-5 5-pin Electrical Bulkhead plus TTL circuitry compatible with current model Ikelite DS strobes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eUse Built-in Flash\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eHousing Dimensions\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e6.4 x 7.5 x 5.9 in (164 x 189 x 150 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eDome Port Dimensions\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e5 x 5.9 x 3.3 in (127 x 151 x 85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eHousing Weight\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e3 lb 3 oz (1.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eDome Port Weight\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e13 oz (376 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eTray \u0026amp; Handle Weight\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e11.5 oz (327 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eMain O-Ring\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-compact-housing-o-ring\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eike.0110\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eIncludes\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eHousing\u003cbr\u003e Tray with Quick Release Handle\u003cbr\u003e #9304.52 Dome Port with Zoom Sleeve\u003cbr\u003e Waterproof Bulkhead Cap\u003cbr\u003e Spare Port O-Ring\u003cbr\u003e Spare Thumbscrews\u003cbr\u003e Silicone Lubricant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003eSpare Parts\u003cbr\u003e Not Included:\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-silicone-o-ring-lubricant-in-2cc-reclosable-tube\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite #0184.2 Silicone Lubricant 2cc Re-closable Tube\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/reefphoto.com\/products\/ikleite-9104-5-waterproof-bulkhead-cap\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite #9104.5 Waterproof Bulkhead Cap\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTrue TTL Exposure\u003c\/h2\u003e\n\u003cp\u003eTTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Unlike fiber optic systems, which attempt to copy the behavior of the camera's built-in flash, this unique housing for the Canon EOS 100D Rebel SL1 provides direct, electrical transmission of this TTL signal to the strobe*.\u003c\/p\u003e\n\u003cp\u003eSince the camera is talking directly to the strobe, the camera's built-in flash does not need to fire. This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession than with optical-based systems. When shooting a fast moving object, this make the difference between going home with the shot or just talking about it. Additionally, in-line communication between the strobe and the camera completely eliminates signal interference and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003cdiv align=\"center\"\u003e\u003c\/div\u003e\n\u003cdiv align=\"center\"\u003e\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216549756971,"sku":"ike.6970.03","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6970.03.jpg?v=1574012373"},{"product_id":"ikelite-ttl-housing-for-olympus-om-d-e-m10-mark-ii","title":"Ikelite TTL Housing for Olympus OM-D E-M10 Mark II","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite TTL Housing for Olympus OM-D E-M10 Mark II\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, port, are not included; shown for illustrative purposes only.  A port is required.\u003c\/p\u003e\n\u003ch2\u003eErgonomics\u003c\/h2\u003e\n\u003cp\u003eIkelite packed a lot in a small package, only slightly larger than the Olympus OM-D E-M10 Mark II camera, and just as comfortable to hold.  Set up is a snap with simple, fully front-loaded camera installation. \u003c\/p\u003e\n\u003ch2\u003eMaterials\u003c\/h2\u003e\n\u003cp\u003eSpecial polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, this housing is designed, built and tested in the USA.  Ikelite uses locally sourced materials.  Ikelite housings are built by hand and individually tested for fit, function and waterproof integrity. Ikelite backs its products with over 50 years of experience and the best service in the dive industry.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll important camera functions are accessible: control not provided for Fn3 button or viewfinder diopter adjustment\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3.3 lb (1497 g) not including tray, handles or port\u003c\/li\u003e\n\u003cli\u003eDimensions 6.4 x 7.5 x 5.3 in (163 x 190 x 135 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTrue TTL Exposure\u003c\/h2\u003e\n\u003cp\u003eSince the camera is talking directly to the strobe, the camera's built-in flash does not need to fire.  This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession than with optical-based systems.  When shooting a fast moving object, this make the difference between going home with the shot or just talking about it. \u003c\/p\u003e\n\u003cp\u003eThe camera's built-in flash is not usable in this installation. \u003c\/p\u003e\n\u003ch3\u003eStrobe Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eIkelite DS160: yes\u003c\/li\u003e\n\u003cli\u003eIkelite DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes, above serial number 7163\u003c\/li\u003e\n\u003cli\u003eSea \u0026amp; Sea strobes: yes, manual flash exposure only \u003c\/li\u003e\n\u003cli\u003eInon Strobes: yes, manual flash exposure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with quick release handle\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePort\u003c\/li\u003e\n\u003cli\u003eCamera\u003c\/li\u003e\n\u003cli\u003eLens\u003c\/li\u003e\n\u003cli\u003eLens Gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-compact-housing-o-ring\" target=\"_blank\" title=\"Ikelite main O-Ring for Compact Camera Housings\" rel=\"noopener noreferrer\"\u003e0110 Main o-ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikleite-9104-5-waterproof-bulkhead-cap\" target=\"_blank\" title=\"Spare \/ replacement cap for Ikelite strobe sync connector\" rel=\"noopener noreferrer\"\u003e9104.5 Waterproof bulkhead cap\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-silicone-o-ring-lubricant-in-2cc-reclosable-tube\" target=\"_blank\" title=\"Resealable Silicone Lubricant for Ikelite O-Rings\" rel=\"noopener noreferrer\"\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216588652587,"sku":"ike.6950.12","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.6950.12.jpg?v=1574012373"},{"product_id":"ikelite-50dl-housing-for-canon-5d-mark-iii-mark-iv-5ds-5ds-r","title":"Ikelite 50DL Underwater Housing for Canon 5D Mark III, Mark IV, 5DS, 5DS R Cameras","description":"\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system with a dive back\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erated to 15 meters \/ 50 feet\u003c\/strong\u003e.  The housing is also available in a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-200dl-housing-for-canon-5d-mark-iii-mark-iv-5ds-5ds-r\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e200 ft depth rated version.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis housing is suitable for snorkeling, pool photography, and other shallow underwater applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum valve included.  \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVacuum pump sold separately.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eLens gears not included\u003c\/em\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTTL circuitry sold separately.\u003c\/li\u003e\n\u003cli\u003eCamera and ports are not included; shown for illustrative purposes only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCanon 5D Mark III\u003c\/li\u003e\n\u003cli\u003e5D Mark IV\u003c\/li\u003e\n\u003cli\u003e5DS\u003c\/li\u003e\n\u003cli\u003e5DS R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eExtra-large, soft-touch zoom knob; Zoom is accessible for many lenses using a unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eTwo spare 1\/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; right-hand handle sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTop View\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA; Individually inspected for fit and water pressure tested to 200' (60m)\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eControls provided:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003eZoom control (see port chart)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eRecord start\/stop button\u003c\/li\u003e\n\u003cli\u003eMain dial\u003c\/li\u003e\n\u003cli\u003eMode dial (lock release)\u003c\/li\u003e\n\u003cli\u003eMetering mode\/white balance button\u003c\/li\u003e\n\u003cli\u003eAF mode\/drive mode button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eINFO button\u003c\/li\u003e\n\u003cli\u003eIndex\/magnify\/reduce button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eLive view shooting\/movie shooting switch\u003c\/li\u003e\n\u003cli\u003e* AE Lock button\u003c\/li\u003e\n\u003cli\u003eAF point selection button\u003c\/li\u003e\n\u003cli\u003eQuick control button\u003c\/li\u003e\n\u003cli\u003eSET Setting button\u003c\/li\u003e\n\u003cli\u003e[Q] Quick control dial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eRight Side View of 200 Foot Depth Rated Housing\u003cbr\u003eThis housing, rated to 50 feet, has a different back.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 50ft Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight-Hand Quick Release Handle\u003cspan\u003e \u003c\/span\u003ewith Extension # 4077.02\u003c\/li\u003e\n\u003cli\u003eShutter trigger extension\u003c\/li\u003e\n\u003cli\u003eCanon TTL Kit\u003c\/li\u003e\n\u003cli\u003eStraight Magnified Viewfinder\u003cspan\u003e \u003c\/span\u003e# 6890.2\u003c\/li\u003e\n\u003cli\u003e45° Magnified Viewfinder\u003cspan\u003e \u003c\/span\u003eType 3 # 6891.3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eLeft Side View\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003ch3\u003eStrobe Options\u003c\/h3\u003e\n\u003cdiv\u003eTTL Exposure\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes.  Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNon-Ikelite Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord.  Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIkelite Non-Digital Strobes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFiber Optic\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by an electrical sync cord.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemote Triggering\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord.  Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eShown With Port\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e(required, not included)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15m \/ 50 foot depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in freshwater\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight  2 kg (4.5 lb) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 234 x 180 x 160 mm (9.2 x 7.1 x 6.3\") including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0132.45 Port o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216728244267,"sku":"ike.73702","price":1695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71702-6_472997a0-b95e-4936-9dfd-aca157f722e1.jpg?v=1574012373"},{"product_id":"ikelite-compact-dslr-housing-for-olympus-e-pl8","title":"Ikelite Compact DSLR Housing for Olympus E-PL8","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Compact DSLR Housing for Olympus E-PL8\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, port, are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003ch3\u003eErgonomics\u003c\/h3\u003e\n\u003cp\u003eIkelite packed a lot in a small package, only slightly larger than the E-PL8 camera, and just as comfortable to hold.  Set up is a snap with simple, fully front-loaded camera installation.\u003c\/p\u003e\n\u003cp\u003eThe shutter lever has been updated to a more sensitive and natural feeling curved design.  The standard control hugs the side of the housing for comfortable use when hand holding.  It can be easily extended using the optional Shutter Trigger Extension # 4077.93 to put it within easy reach when using a right-hand quick release handle\u003c\/p\u003e\n\u003ch3\u003eVacuum Leak Testing\u003c\/h3\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite Vacuum Kit for 1\/2 Inch Holes\u003c\/a\u003e.  A vacuum kit allows you to de-pressurize the housing to check for proper assembly prior to entering the water.\u003c\/p\u003e\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cp\u003eSpecial polycarbonate blends allow us to create an extremely strong and lightweight enclosure.  Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, this housing is designed, built and tested in the USA.  Ikelite uses locally sourced materials.  Ikelite housings are built by hand and individually tested for fit, function and waterproof integrity.  Ikelite backs its products with over 50 years of experience and the best service in the dive industry.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts a variety of ports to accommodate zoom, macro, and wide angle lenses from Olympus and Panasonic.  Compatible port not included.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll important camera functions are accessible.  Controls are not provided for Fn button or Zoom button\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight  1.3k not including tray, handles or port\u003c\/li\u003e\n\u003cli\u003eDimensions 132 x 191 x 150 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTrue TTL Exposure\u003c\/h3\u003e\n\u003cp\u003eSince the camera is talking directly to the strobe, the camera's built-in flash does not need to fire.  This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession than with optical-based systems.  When shooting a fast moving object, this make the difference between going home with the shot or just talking about it. \u003c\/p\u003e\n\u003cp\u003eThe camera's built-in flash is not usable in this installation. \u003c\/p\u003e\n\u003ch3\u003eStrobe Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes, above serial number 7163\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes, manual flash exposure only \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with quick release handle\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249.3\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePort\u003c\/li\u003e\n\u003cli\u003eCamera\u003c\/li\u003e\n\u003cli\u003eLens\u003c\/li\u003e\n\u003cli\u003eLens Gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0110 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0132.36 Front port o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e9249.6 Port securing thumbscrews (set of 3)\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216775036971,"sku":"ike.6951.08","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6951.08.jpg?v=1574012373"},{"product_id":"ikelite-73005-50-foot-housing-for-nikon-d500-with-dl-port-mount","title":"Ikelite 50DL Water Housing for Nikon D500 DSLR","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the Surf and Pool underwater housing for Nikon D500 rated to 50 foot \/ 15-meter depth.  Overall, it is 1\/2 pound lighter, and features a slimmed-down, streamlined, back\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ewith fewer controls\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ethan the\u003cspan\u003e \u003c\/span\u003e200-foot depth rated Ikelite Underwater Housing for Nikon D500.\u003c\/p\u003e\n\u003cp\u003eIkelite is introducing the NEW Dry Lock (DL) Port Mount on their housing for D500.  Building off of Ikelite popular port system for compact mirrorless cameras, they have re-designed and refined the concept and it's ready for the big leagues.\u003c\/p\u003e\n\u003cp\u003eDL Port Mount Features Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA unique exterior o-ring which prevents water from dripping onto your camera when the port is removed;\u003c\/li\u003e\n\u003cli\u003eSolid, sure-stop press fit with no threading, turning, or twisting of the ports or extensions;\u003c\/li\u003e\n\u003cli\u003eBuilt for reliability in remote locations with standard locking thumbscrews and no complex moving parts;\u003c\/li\u003e\n\u003cli\u003eAccommodates large diameter lenses with ease;\u003c\/li\u003e\n\u003cli\u003eA new compact 8\" dome port provides the optical quality of a large dome with the size of a much smaller dome—perfect for close-focus wide-angle work;\u003c\/li\u003e\n\u003cli\u003ePlus the new featherweight full 8\" dome is less than half the weight of its predecessor and several pounds lighter than the glass alternatives with nearly identical optical quality! \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eExtra-large, soft-touch zoom knob next to the left handle\u003c\/li\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eVacuum valve included;\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003evacuum pump sold separately\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eLens gears are not included.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003eFlash bulkhead connector for manual exposure with most popular underwater strobes\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eEach housing is individually inspected for fit and water pressure tested to 200' (60m)\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLenses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccepts any Ikelite DL-series port to accommodate most popular zoom, macro, and wide-angle lenses\u003c\/li\u003e\n\u003cli\u003eZoom is accessible for many lenses with a specific lens gear\u003c\/li\u003e\n\u003cli\u003eDome ports are recommended for wide-angle and zoom lenses underwater\u003c\/li\u003e\n\u003cli\u003eFlat ports are recommended for macro close-up lenses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes\u003c\/li\u003e\n\u003cli\u003eOptional TTL hot shoe and Nikon TTL Converter (Ikelite number 4301.3) provide TTL operation with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eErgonomics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eSensitive new trigger lever is extendable for comfortable use when holding the optional right-hand quick release handle\u003c\/li\u003e\n\u003cli\u003eThe back is completely clear for an unobstructed view of the camera and o-ring seal\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eTwo spare 1\/2-20 threaded accessory mount locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eOptional Right-Hand Quick Release Handle with Extension, Ikelite # 4077.02, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eControls\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eMovie-record button\u003c\/li\u003e\n\u003cli\u003eSub-command dial\u003c\/li\u003e\n\u003cli\u003eExposure compensation (+\/-) button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eMODE button\u003c\/li\u003e\n\u003cli\u003eWB button\u003c\/li\u003e\n\u003cli\u003eMetering button\u003c\/li\u003e\n\u003cli\u003eBKT button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMain command dial\u003c\/li\u003e\n\u003cli\u003eMulti-selector\u003c\/li\u003e\n\u003cli\u003eInfo button\u003c\/li\u003e\n\u003cli\u003eLive view selector\u003c\/li\u003e\n\u003cli\u003eLv button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eOK button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControls NOT provided on this housing, which is provided on the 200-foot housing are:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ei button\u003c\/li\u003e\n\u003cli\u003etrash\u003c\/li\u003e\n\u003cli\u003ekey \/ ?\u003c\/li\u003e\n\u003cli\u003emagnify +\u003c\/li\u003e\n\u003cli\u003emagnify -\u003c\/li\u003e\n\u003cli\u003eFn 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 50ft Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eOptional accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight-Hand Quick Release Handle with Extension #\u003cspan\u003e \u003c\/span\u003e4077.02\u003c\/li\u003e\n\u003cli\u003eStraight Enhanced Magnified Viewfinder #\u003cspan\u003e \u003c\/span\u003e6890.2\u003c\/li\u003e\n\u003cli\u003e45° Magnified Viewfinder Type 3 #\u003cspan\u003e \u003c\/span\u003e6891.3\u003c\/li\u003e\n\u003cli\u003eTTL Hotshoe #46061 and TTL converter #4301.3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCamera Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with the Nikon D500 DSLR as shipped by the manufacturer.  Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other Nikon DSLR models from being used in this housing.  We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e50 feet \/ 15-meter depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in freshwater\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 4.5 lb \/ 2 kg not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.2 x 7.1 x 6.3\"  \/ 234 x 180 x 160 mm including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.61 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0132.45 Port o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7216972562475,"sku":"ike.73005","price":1695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.71005_1.jpg?v=1574012373"},{"product_id":"ikelite-slr-dc-housing-for-canon-m3","title":"Ikelite SLR-DC Housing for Canon M3","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite SLR-DC Housing for Canon M3\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, and port, are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eIkelite underwater housing for the Canon M3 mirrorless APS-C camera.\u003c\/p\u003e\n\u003cp\u003eThe two biggest advantages of shooting underwater with an interchangeable lens camera are the variety of great lenses available, and the ability to connect an external flash directly to the camera. The Ikelite housing for the Canon EOS M3 is designed with these key points in mind to deliver a system that truly helps you take better photos in and under the water.\u003c\/p\u003e\n\u003cp\u003eA fast and reliable strobe connection is essential to getting the shot underwater.  The Ikelite Housing for the Canon EOS M3 provides a direct electrical connection to the camera's external flash hot shoe. Electrical strobe connection is dozens of times faster than firing the camera's built in flash and extends the battery life of the camera—which is essential when shooting a mirrorless system.  Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use. A variety of sync cord terminations are available for Ikelite, Sea \u0026amp; Sea, or Inon strobes for ultimate versatility if you have multiple sets of strobes.\u003c\/p\u003e\n\u003ch3\u003eTrue Canon TTL\u003c\/h3\u003e\n\u003cp\u003eOnly Ikelite strobes provide true TTL operation.   Sea \u0026amp; Sea strobes, or Inon strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eTwo fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers.  The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater.  Use of a fiber optic connector requires the camera's built-in flash to fire, bypassing the TTL functionality of the housing.\u003c\/p\u003e\n\u003ch3\u003eLens Support\u003c\/h3\u003e\n\u003cp\u003eThis housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses from Olympus and Panasonic.  Lens port is required and sold separately.\u003c\/p\u003e\n\u003ch3\u003eGreat Handling\u003c\/h3\u003e\n\u003cp\u003eControl symbols laser engraved into the back of the housing will never peel off or fade even with years of use.  The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eThis housing includes a balanced aluminum tray with Ikelite quick release handle for easy attachment and removal of strobes and video lights.  This unique handle is curved slightly to fit the natural curvature of your hand, and features a soft over-mold which makes it a delight to hold.  The complete tray and handle detaches with the removal of two nuts for packing or to attach the optional Tray with Dual Handles.\u003c\/p\u003e\n\u003cp\u003eIkelite is the only housing and lighting system for the Canon EOS M3 that is 100% designed, built, and tested in the USA.  The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products.\u003c\/p\u003e\n\u003ch3\u003eStrobe Compatibility\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eSerial number requirements\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: not compatible\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes, above serial number 7163\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical sync cord compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIkelite-to-Ikelite TTL Sync Cord (TTL) Product 4103.51\u003c\/li\u003e\n\u003cli\u003eIkelite-to-Ikelite TTL Dual Sync Cord (TTL) Product 4103.52\u003c\/li\u003e\n\u003cli\u003eSEA\u0026amp;SEA \/ INON Strobe-to-Ikelite Non-TTL Sync Cord (Manual) Product 4118.1\u003c\/li\u003e\n\u003cli\u003eSEA\u0026amp;SEA \/ INON Strobe-to-Ikelite Non-TTL Dual Sync Cord (Manual) Product 4118.2\u003c\/li\u003e\n\u003cli\u003eNikonos SB Strobe-to-Ikelite Non-TTL Sync Cord (Manual) Product 4116.31\u003c\/li\u003e\n\u003cli\u003eNikonos SB Strobe-to-Ikelite Non-TTL Sync Cord (Manual) Product 4116.32\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFiber optic cord compatibility\u003c\/h3\u003e\nThe correct fiber optic sync cord will depend on the connector used by your strobe.\n\u003cul\u003e\n\u003cli\u003eINON Optical D Cable \"Non-wireless type\" L-Connector\u003c\/li\u003e\n\u003cli\u003eSea\u0026amp;Sea Fiber Optic Cable (L-type) Product No. 50107\u003c\/li\u003e\n\u003cli\u003eOlympus UW Fiber Optic Cable PTCB-E02\u003c\/li\u003e\n\u003cli\u003eNauticam Optical Fiber Cable No. 26211 Nauticam to INON\u003c\/li\u003e\n\u003cli\u003eNauticam Optical Fiber Cable No. 26212 Nauticam to Sea\u0026amp;Sea\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with quick release handle\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll camera functions are accessible\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3.1 lb (1.4 kg) not including tray, handles or port\u003c\/li\u003e\n\u003cli\u003eDimensions 6.4 x 7.6 x 5.3 in (163 x 190 x 135 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0110 Main o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7219140657195,"sku":"ike.6973.03","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.6973.03.jpg?v=1574012374"},{"product_id":"ikelite-compact-housing-for-panasonic-g7","title":"Ikelite Compact Housing for Panasonic G7","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Compact Housing for Panasonic Lumix G7\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, port, are not included; shown for illustrative purposes only. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note that a compatible Mirrorless Port is required for waterproof operation of this housing.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe front-loading camera mounting system makes installation and removal a breeze.  The camera mounting plate allows ready access to the battery and memory card, and features a standard 1\/4-20 mounting point for attachment to a tripod topside.\u003c\/p\u003e\n\u003cp\u003eAn flash TTL circuit is included and fine-tuned to the Panasonic Lumix G7 flash exposure protocol for the most accurate exposure possible.  The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control.  At this time, only Ikelite DS strobes are capable of powering the circuitry.\u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eThe bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends.  A variety of sync cords are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes.\u003c\/p\u003e\n\u003cp\u003eThe Panasonic G7 camera does not include a pop-up flash.  Therefore, strobes can not be fired optically.  \u003cstrong\u003eElectrical sync cord\u003c\/strong\u003e will be required, and is not included.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all important camera functions\u003c\/li\u003e\n\u003cli\u003eControls are not provided for the Focus mode lever\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded tray mounts with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water; actual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3.4 pounds (1540 g) not including port\u003c\/li\u003e\n\u003cli\u003eDimensions 7.8 x 6.0 x 5.9 in (198 x 152 x 150 mm) including projections\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePort Selection\u003c\/h3\u003e\n\u003cp\u003eA port is required and not included with the housing.  A lens gear sleeve is required for zoom lenses.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, Not Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0110 Main o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7219795492907,"sku":"ike.6961.07","price":974.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Underwater_Housing_for_Panasonic_G7.jpg?v=1574012374"},{"product_id":"ikelite-compact-housing-for-sony-a6300","title":"Ikelite Compact Housing for Sony A6300","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Compact DSLR Housing for Sony A6300\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, port, are not included; shown for illustrative purposes only.  \u003cem\u003ePort is required\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eWhenever possible, controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use. The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eThe front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card, and features a standard 1\/4-20 mounting point for attachment to a tripod topside.\u003c\/p\u003e\n\u003cp\u003eTwo fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers. Use of a fiber optic connector requires the camera's built-in flash to fire, reducing battery life and bypassing the TTL functionality of the housing.\u003c\/p\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Sony Alpha a6300 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.\u003c\/p\u003e\n\u003cp\u003eIt couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses. brand new ABS-PC blend provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead capLubricant\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all important camera functions\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded tray mounts with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3.1 pounds (1430 g) not including port\u003c\/li\u003e\n\u003cli\u003eDimensions 6.3 x 7.5 x 5.2 in (160 x 191 x 132 mm) including projections\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7223757897771,"sku":"ike.6910.63","price":974.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Ikelite_Underwater_Housing_for_Sony_A6300-1.jpg?v=1574012375"},{"product_id":"ikelite-compact-housing-for-sony-a6500","title":"Ikelite Compact Housing for Sony A6500","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Compact DSLR Housing for Sony A6500\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, port, are not included; shown for illustrative purposes only.  \u003cem\u003ePort is required\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eWhenever possible, controls are located in the same configuration as on the camera to replicate the muscle memory and familiarity you've developed with your camera on the surface. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use. The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eThe front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card, and features a standard 1\/4-20 mounting point for attachment to a tripod topside.\u003c\/p\u003e\n\u003cp\u003eTwo fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers. Use of a fiber optic connector requires the camera's built-in flash to fire, reducing battery life and bypassing the TTL functionality of the housing.\u003c\/p\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Sony Alpha a6500 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. At this time, only Ikelite DS strobes are capable of powering the circuitry. SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.\u003c\/p\u003e\n\u003cp\u003eIt couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.\u003c\/p\u003e\n\u003cp\u003eVisible in the image above, on the right side of the housing, Ikelite has included a spare 1\/2-20 threaded accessory port.  This provides for easy installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVacuum Kit, Ikelite number 47012\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses. brand new ABS-PC blend provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eHousing back o-ring #0110\u003c\/li\u003e\n\u003cli\u003eHousing front o-ring #0132.36\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap #9104.5\u003c\/li\u003e\n\u003cli\u003eLubricant #0184.1\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all important camera functions\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded tray mounts with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3.1 pounds (1430 g) not including port\u003c\/li\u003e\n\u003cli\u003eDimensions 6.3 x 7.5 x 5.2 in (160 x 191 x 132 mm) including projections\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7258186580011,"sku":"ike.6910.65","price":974.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6910.65-1.jpg?v=1574012375"},{"product_id":"ikelite-slr-dc-housing-for-canon-m10","title":"Ikelite SLR-DC Housing for Canon M10","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIkelite SLR-DC Housing for Canon M10\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera, lens, and port, are not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003ePort is \u003cem\u003erequired\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eIkelite underwater housing for the Canon M10 mirrorless APS-C camera.\u003c\/p\u003e\n\u003cp\u003eThe two biggest advantages of shooting underwater with an interchangeable lens camera are the variety of great lenses available, and the ability to connect an external flash directly to the camera. The Ikelite housing for the Canon EOS M10 is designed with these key points in mind to deliver a system that truly helps you take better photos in and under the water.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eA fast and reliable strobe connection is essential to getting the shot underwater. \u003c\/p\u003e\n\u003cp\u003eTwo fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers.  The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater.  Use of a fiber optic connector requires the camera's built-in flash to fire.\u003c\/p\u003e\n\u003ch3\u003eLens Support\u003c\/h3\u003e\n\u003cp\u003eThis housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses from Olympus and Panasonic.  Lens port is required and sold separately.\u003c\/p\u003e\n\u003ch3\u003eGreat Handling\u003c\/h3\u003e\n\u003cp\u003eControl symbols laser engraved into the back of the housing will never peel off or fade even with years of use.  The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003cp\u003eThis housing includes a balanced aluminum tray with Ikelite quick release handle for easy attachment and removal of strobes and video lights.  This unique handle is curved slightly to fit the natural curvature of your hand, and features a soft over-mold which makes it a delight to hold.  The complete tray and handle detaches with the removal of two nuts for packing or to attach the optional Tray with Dual Handles.\u003c\/p\u003e\n\u003cp\u003eIkelite is the only housing and lighting system for the Canon EOS M10 that is 100% designed, built, and tested in the USA.  The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFiber optic cord compatibility\u003c\/h3\u003e\nThe correct fiber optic sync cord will depend on the connector used by your strobe.\n\u003cul\u003e\n\u003cli\u003eINON Optical D Cable \"Non-wireless type\" L-Connector\u003c\/li\u003e\n\u003cli\u003eSea\u0026amp;Sea Fiber Optic Cable (L-type) Product No. 50107\u003c\/li\u003e\n\u003cli\u003eOlympus UW Fiber Optic Cable PTCB-E02\u003c\/li\u003e\n\u003cli\u003eNauticam Optical Fiber Cable No. 26211 Nauticam to INON\u003c\/li\u003e\n\u003cli\u003eNauticam Optical Fiber Cable No. 26212 Nauticam to Sea\u0026amp;Sea\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with quick release handle\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0110 Main o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7259241644075,"sku":"ike.6973.10","price":875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/underwater_housing_for_Canon_M10-1.jpg?v=1574012375"},{"product_id":"ikelite-housing-for-canon-g5x-camera","title":"Ikelite Housing for Canon G5X Camera","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Underwater Housing for Canon G5X Camera\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003ch3\u003eAbout The Camera\u003c\/h3\u003e\n\u003cp\u003eUnlike the G16 and other preceding models, Canon finally gives us TTL flash in Manual mode. \u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA.   Ikelite uses locally sourced, top-grade materials.  Ikelite housings are built by hand and individually tested for fit, function and waterproof integrity.   Ikelite backs its products with over 50 years of experience and service within the dive industry.\u003c\/p\u003e\n\u003cp\u003eA compact mounting tray attaches to the camera's tripod attachment point and slides into the front of the housing simply and securely. The mounting tray features a 1\/4-20 tripod mount so that it doesn't need to be removed when you switch to surface photography.\u003c\/p\u003e\n\u003cp\u003eThere are two 1\/4-20 mounts on the bottom of the housing for secure, rotation-free mounting of an optional tray and handles.\u003c\/p\u003e\n\u003ch3\u003eTrue Canon TTL\u003c\/h3\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to Canon's latest flash exposure protocol for the most accurate exposure possible with the Canon PowerShot G5X camera.  The circuit is powered by the strobe for zero maintenance and no batteries to change.  Exposure compensation in TTL mode is supported using the camera's built-in control.  At this time, only Ikelite DS strobes are capable of powering the circuitry.  SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eA fast and reliable strobe connection is essential to getting the shot underwater.  This housing provides a direct electrical connection to the camera's external flash hot shoe.  Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use.  The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends.  A variety of sync cord terminations are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes for ultimate versatility.\u003c\/p\u003e\n\u003cp\u003eTwo fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers.  The camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater.  Use of a fiber optic connector requires the camera's built-in flash to fire, bypassing the TTL functionality of the housing.\u003c\/p\u003e\n\u003ch3\u003eStrobe compatibility\u003c\/h3\u003e\n\u003cp\u003eSerial number requirements\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIkelite AF35: not compatible\u003c\/li\u003e\n\u003cli\u003eIkelite DS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eIkelite DS51: yes\u003c\/li\u003e\n\u003cli\u003eIkelite DS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eIkelite DS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eIkelite DS200: yes, above serial number 7163\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElectrical sync cord compatibility\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIkelite-to-Ikelite housing TTL Sync Cord (TTL); Ikelite #4103.51\u003c\/li\u003e\n\u003cli\u003eIkelite-to-Ikelite housing TTL Dual Sync Cord (TTL); Ikelite # 4103.52\u003c\/li\u003e\n\u003cli\u003eSea \u0026amp; Sea or Inon Strobe-to-Ikelite housing Non-TTL Sync Cord (manual control); Ikelite #4118.1\u003c\/li\u003e\n\u003cli\u003eDual Sea \u0026amp; Sea or Inon Strobe-to-Ikelite Non-TTL Sync Cord (manual control); Ikelite #4118.2\u003c\/li\u003e\n\u003cli\u003eNikonos SB Strobe-to-Ikelite housing Non-TTL Sync Cord (manual control); Ikelite #4116.31\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003eThe housing port is designed to accept Ikelite 3.0-inch diameter color filters, and wide angle or macro options with 67mm threads.  Light is absorbed very quickly as it passes through water.  A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water.  The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through.  The results speak for themselves - photos with the best color, exposure and clarity possible.\u003c\/p\u003e\n\u003cp\u003eThe Ikelite WD-3 Wide Angle Dome provides mid-range angle of view with no vignetting.\u003c\/p\u003e\n\u003cp\u003eWe recommend the Ikelite W30 Wide Angle Lens or Inon UWL-H100 Wide Angle Lens for excellent edge sharpness with minimal vignetting (dark shadows in the corners of the image).  Vignetting may be eliminated by either zooming slightly or cropping in post-production.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls are not provided for the Diopter Adjustment Dial or Mobile Device Connect button; Mobile devices may be connected through the housing using the camera's menus\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread tray mounting with 3 inch (76 mm) spacing\u003c\/li\u003e\n\u003cli\u003eWeight 3.3 lb (1500 g) not including tray, handles, or port.\u003c\/li\u003e\n\u003cli\u003eDimensions 7.4 x 5.8 x 5.8 in (188 x 147 x 147 mm) including projections\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0110 Main o-ring\u003c\/li\u003e\n\u003cli\u003e9104.5 Waterproof Bulkhead Cap\u003c\/li\u003e\n\u003cli\u003e0200 Port cover\u003c\/li\u003e\n\u003cli\u003e9523.10 Tray hardware\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv align=\"center\"\u003e\u003c\/div\u003e\n\u003cdiv align=\"center\"\u003e\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7263122620459,"sku":"ike.6146.05","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6146.05.jpg?v=1574012376"},{"product_id":"ikelite-digital-housing-for-olympus-stylus-1s","title":"Ikelite Digital Housing for Olympus Stylus 1S","description":"\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Olympus Stylus 1s flash exposure protocol for the most accurate exposure possible.  The circuit is powered by the strobe for zero maintenance and no batteries to change.  Exposure compensation in TTL mode is supported using the camera's built-in control.  At this time, only Ikelite DS strobes are capable of powering the circuitry . SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003cbr\u003e\u003cbr\u003eThis housing provides a direct electrical connection to the camera's external flash hot shoe.  Cord attachment is as easy as screwing in a lightbulb, and the threaded fit prevents accidental detachment during use.  The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends.  A variety of sync cord terminations are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes for ultimate versatility.\u003c\/p\u003e\n\u003cp\u003eThe camera's built-in flash is suitable for firing an external strobe, but not for lighting a photo underwater.  Two fiber optic ports are built into the front of the housing provide an attachment point for fiber optic cords from most major manufacturers.  Use of a fiber optic connector requires the camera's built-in flash to fire, reducing battery life and bypassing the TTL functionality of the housing. \u003cbr\u003e\u003cbr\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system.  Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.\u003cbr\u003e\u003cbr\u003eThe port is threaded for the direct attachment of 67mm threaded accessory macro lenses.  We recommend a macro lens which is designed for underwater use like those from Epoque, INON, Subsee, Nauticam, and other manufacturers. 67mm threaded wide angle wet lenses may be attached to the front of the lens port, but will exhibit vignetting (dark shadows around the edges of the image).  Vignetting can be reduced by zooming in or cropping the photo in post-production\u003c\/p\u003e\n\u003ch3\u003eWhat's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003eLubricant\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions except Diopter adjustment dial, Flash switch, Size zoom lever, Front control ring, Fn2 button, Front lever\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread tray mounting with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eWeight 3.1 lb (1.4 kg)\u003c\/li\u003e\n\u003cli\u003eDimensions 7.5 x 5.5 x 5.75 in (190 x 132 x 146 mm)\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7263401148459,"sku":"ike.6139.51","price":575.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Ikelite_underwater_housing_for_Olympus_Stylus_1S.jpg?v=1574012376"},{"product_id":"ikelite-ultra-compact-housing-for-panasonic-lx7","title":"Ikelite Ultra Compact Housing for Panasonic LX7","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Ultra Compact Housing for Panasonic LX7\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eStrobe Compatibility, Electrical Sync:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes, above serial number 7163\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes, manual flash exposure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e What's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eFlash diffuser\u003c\/li\u003e\n\u003cli\u003eFlash deflector\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions \u003cem\u003e\u003cstrong\u003eexcept\u003c\/strong\u003e\u003c\/em\u003e Aspect Ratio Selector switch, Flash Open switch, ND\/FOCUS lever\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003e12-24 thread tray mounting with 3 in (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eWeight 2.8 lb (1.3 kg)\u003c\/li\u003e\n\u003cli\u003eDimensions 6.8 x 5 x 5.9 in (17 x 13 x 15 cm) including projections\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0109 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0119.2 Port o-ring\u003c\/li\u003e\n\u003cli\u003e0200 Port cover\u003c\/li\u003e\n\u003cli\u003e9523.10 Tray hardware\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7263501582379,"sku":"ike.6171.07","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.6171.07.jpg?v=1574012376"},{"product_id":"ikelite-housing-for-canon-g7x-camera","title":"(Discontinued) Ikelite Housing for Canon G7X Camera","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Housing for Canon G7X Camera\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003ch3\u003eAbout The Camera\u003c\/h3\u003e\n\u003cp\u003eCanon G7 X features a large 1\"-type 20.2MP BSI-CMOS sensor into a very compact and usable body. It also boasts speedy auto-focus and a sharp, 24-100mm equivalent lens. \u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.\u003c\/p\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eAn included flash diffuser improves lighting quality when the camera's built-in flash is used.  A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions.  For best results a color correcting filter or external lighting is recommended.  External lighting is more powerful and can be placed in a position to virtually eliminate the backscatter - or \"snow\" - from your underwater images.\u003c\/p\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003eThe housing port is designed to accept 3.0-inch diameter color filters, and wide angle or macro options with 67mm threads.  Light is absorbed very quickly as it passes through water.  A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water.  The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through.  The results speak for themselves - photos with the best color, exposure and clarity possible.\u003c\/p\u003e\n\u003cp\u003eWe recommend the Ikelite W30 Wide Angle Lens or Inon UWL-H100 Wide Angle Lens for excellent edge sharpness with minimal vignetting (dark shadows in the corners of the image).  Vignetting may be eliminated by either zooming slightly or cropping in post-production.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eFlash diffuser\u003c\/li\u003e\n\u003cli\u003eFlash deflector\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions except Flash switch and Mobile Device Connection button\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003e12-24 thread tray mounting with 3 in (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eWeight 2.6 lb (1180 g)\u003c\/li\u003e\n\u003cli\u003eDimensions 6.9 x 5.0 x 5.4 in (175 x 127 x 137 mm)\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts\u003c\/h3\u003e\n\u003cp\u003eNot included:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-compact-housing-o-ring\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e0109 Main o-ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e0132.30 Port o-ring\u003c\/li\u003e\n\u003cli\u003e0200 Port cover\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-tray-hardware-12-24-thread\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e9523.10 Tray hardware\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-silicone-o-ring-lubricant-in-2cc-reclosable-tube\"\u003e 0184.2 Silicone lubricant \u003c\/a\u003eresealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7263862259755,"sku":"ike.6146.07","price":550.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.6146.07_1.jpg?v=1574012376"},{"product_id":"ikelite-housing-for-canon-g7x-mark-ii-camera","title":"Ikelite Underwater Housing for Canon G7X Mark II Camera","description":"\u003ch1\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Housing for Canon G7X Mark II Camera\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. Ikelite backs its products with over 50 years of experience and service within the dive industry.\u003c\/p\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eAn included flash diffuser improves lighting quality when the camera's built-in flash is used.  A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions.  For best results a color correcting filter or external lighting is recommended.  External lighting is more powerful and can be placed in a position to virtually eliminate the backscatter - or \"snow\" - from your underwater images.\u003c\/p\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003eThe housing port is designed to accept 3.0-inch diameter color filters, and wide angle or macro options with 67mm threads.  Light is absorbed very quickly as it passes through water.  A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water.  The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through.  The results speak for themselves - photos with the best color, exposure and clarity possible.\u003c\/p\u003e\n\u003cp\u003eWe recommend the Ikelite W30 Wide Angle Lens or Inon UWL-H100 Wide Angle Lens for excellent edge sharpness with minimal vignetting (dark shadows in the corners of the image).  Vignetting may be eliminated by either zooming slightly or cropping in post-production.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eFlash diffuser\u003c\/li\u003e\n\u003cli\u003eFlash deflector\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions except Flash switch and Mobile Device Connection button\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003e12-24 thread tray mounting with 3 in (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eWeight 2.6 lb (1180 g)\u003c\/li\u003e\n\u003cli\u003eDimensions 6.9 x 5.0 x 5.4 in (175 x 127 x 137 mm)\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts\u003c\/h3\u003e\n\u003cp\u003eNot included:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-compact-housing-o-ring\" target=\"_blank\"\u003e0109 Main o-ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e0132.30 Port o-ring\u003c\/li\u003e\n\u003cli\u003e0200 Port cover\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-tray-hardware-12-24-thread\" target=\"_blank\"\u003e9523.10 Tray hardware\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/reefphotostore.myshopify.com\/admin\/products\/609823817771\" target=\"_blank\"\u003e0184.2 Silicone lubricant\u003c\/a\u003e resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7263982288939,"sku":"ike.6146.08","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Underwater_Housing_for_Canon_G7X_Mark_II.jpg?v=1574012376"},{"product_id":"ikelite-ultra-compact-housing-for-panasonic-lx10-lx15","title":"Ikelite Ultra Compact Housing for Panasonic LX10 \/ LX15","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Ultra Compact Housing for Panasonic LX10 or LX15\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eVacuum Leak Testing\u003c\/h3\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite Vacuum Kit for 1\/2 Inch Holes\u003c\/a\u003e.  A vacuum kit allows you to de-pressurize the housing to check for proper assembly prior to entering the water.\u003c\/p\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eDue to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water.  For the best color and clarity, we recommend adding a filter, strobe, or constant-on light.  The built-in flash may be used to trigger external strobes via fiber optic sync cord.  Two ports are provided for the connection of up to two fiber optic cords.\u003c\/p\u003e\n\u003cp\u003eThe housing port is designed to accept 3.0-inch diameter color filters, and wide angle or macro options with 67mm threads.  Light is absorbed very quickly as it passes through water.  A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water.  The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through.  The results speak for themselves - photos with the best color, exposure and clarity possible.\u003c\/p\u003e\n\u003ch3\u003eMacro\u003c\/h3\u003e\n\u003cp\u003eIf desired, external close-up lens (diopter) may be directly mounted to the 67mm threaded port.\u003c\/p\u003e\n\u003ch3\u003eWide Angle\u003c\/h3\u003e\n\u003cp\u003eThe 67mm threaded port is ready to accept wide angle lenses and domes.  Some suitable choices are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-wd-3-wide-angle-conversion-dome\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite WD-3\u003c\/a\u003e wide angle conversion dome\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-w-30-0-59x-wide-angle-lens-with-67mm-threads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite W-30\u003c\/a\u003e wide angle lens\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/inon-uwl-h100-28m67-type-1-wide-angle-conversion-lens\"\u003eInon UWL-H100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/fantasea-bigeye-67mm-mark-ii\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFantasea 67mm Bigeye\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions \u003cem\u003e\u003cstrong\u003eexcept\u003c\/strong\u003e\u003c\/em\u003e flash open lever; flash must be opened prior to installing camera in housing\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003e12-24 thread tray mounting with 76mm (3 inch) spacing\u003c\/li\u003e\n\u003cli\u003eWeight  1.2 kg  \/ 2.6 pound\u003c\/li\u003e\n\u003cli\u003eDimensions 135 x 130 x 175 mm  (6.9 x 5.1 x 5.3 inch)  including projections\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts, not included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0109 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0200 Port cover\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7264259440683,"sku":"ike.6171.01","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6171.01.jpg?v=1574012376"},{"product_id":"ikelite-underwater-housing-for-panasonic-zs100-tz100-tz101","title":"Ikelite Underwater Housing for Panasonic ZS100, TZ100, TZ101","description":"","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7264478527531,"sku":"ike.6170.10","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Underwater_Housing_for_Panasonic_ZS100_TZ100_TZ101.jpg?v=1574012377"},{"product_id":"ikelite-action-housing-for-canon-g7x-camera","title":"Ikelite Action Housing for Canon G7X Camera","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Action Housing for Canon G7X Camera\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eAction Housings are designed with water sports and travel in mind: built tough yet compact and lightweight.\u003c\/p\u003e\n\u003cp\u003eCompact Action Housings are also perfect for the outdoor adventurer.  A hard cased housing provides both protection and functionality way beyond the plastic bag alternative.  And unlike a traditional dive housing, the compact Action Housing won't add excessive bulk to your backpack.\u003c\/p\u003e\n\u003cp\u003eThe Action Housing is perfect for white water rafting, wind surfing, mud runs, or any activity with an anti-camera environment.  Also suitable for snorkeling.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe camera's built in flash cannot be used inside of the housing.  This housing is not compatible with a strobe.  \u003c\/em\u003eUnderwater housings for the Canon G7X provide more controls and compatibility with underwater strobes.\u003c\/p\u003e\n\u003cp\u003eControls are provided for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShutter button\u003c\/li\u003e\n\u003cli\u003eON\/OFF (Power) button\u003c\/li\u003e\n\u003cli\u003eW\/T (zoom) lever\u003c\/li\u003e\n\u003cli\u003eMovie button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eMENU button Up\/Down\/Left\/Right buttons\u003c\/li\u003e\n\u003cli\u003eFUNC.\/SET button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe scratch-resistant glass lens port provides full use of the camera's zoom range without vignetting.  The front of the port accepts press-on color correcting filters and is 67mm threaded for the attachment of optional accessories.\u003c\/li\u003e\n\u003cli\u003eA custom ABS-PC blend housing with acetyl controls provides strength, UV protection, and fundamentally corrosion-free performance.\u003c\/li\u003e\n\u003cli\u003eA central 1\/4-20 tripod mount on the bottom of the housing is the perfect attachment point for stabilizing trays and constant-on lighting.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and individually tested for fit, function, and waterproof integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003e3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses.  Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-wd-3-wide-angle-conversion-dome\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite WD-3 Wide Angle Dome\u003c\/a\u003e provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-w-30-0-59x-wide-angle-lens-with-67mm-threads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite W-30 Wide Angle Lens\u003c\/a\u003e, \u003ca href=\"https:\/\/reefphoto.com\/products\/inon-uwl-h100-28m67-type-1-wide-angle-conversion-lens\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eINON UWL-H100 M67 Wide Angle Lens\u003c\/a\u003e, and other 67mm threaded wide angle lenses, provide a wider maximum angle of view.  Because these are separated from the camera's lens by glass, air, and water, some vignetting and edge distortion will be present.  These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and\/or cropping in post-production.\u003c\/p\u003e\n\u003cp\u003eExternal macro lenses with 67mm threads from INON, Epoque, and other manufacturers, can be attached directly to the front of the housing's port.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-ur-pro-blue-water-filter-for-3-0-inch-ports\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3-inch diameter color filters\u003c\/a\u003e press directly onto these ports.  Most wide angle lenses require a 3.6-inch diameter color filter.\u003c\/p\u003e\n\u003ch3\u003e What's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eLanyard\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eSlightly positive buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eCentral 1\/4-20 tripod thread tray mounting\u003c\/li\u003e\n\u003cli\u003eWeight 17.8 oz (505 g)\u003c\/li\u003e\n\u003cli\u003eDimensions 6 x 4.6 x 4.5 inches (152 x 117 x 144 mm)\u003c\/li\u003e\n\u003cli\u003e3 inch (76 mm) diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7278273626155,"sku":"ike.6245.07","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Action_Housing_for_Canon_G7x.jpg?v=1574012378"},{"product_id":"ikelite-action-housing-for-canon-g7x-mark-ii-camera","title":"Ikelite Action Housing for Canon G7X Mark II Camera","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Action Housing for Canon G7X Mark II Camera\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eAction Housings are designed with water sports and travel in mind: built tough yet compact and lightweight.\u003c\/p\u003e\n\u003cp\u003eCompact Action Housings are also perfect for the outdoor adventurer.  A hard cased housing provides both protection and functionality way beyond the plastic bag alternative.  And unlike a traditional dive housing, the compact Action Housing won't add excessive bulk to your backpack.\u003c\/p\u003e\n\u003cp\u003eThe Action Housing is perfect for white water rafting, wind surfing, mud runs, or any activity with an anti-camera environment.  Also suitable for snorkeling.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe camera's built in flash cannot be used inside of the housing.  This housing is not compatible with a strobe.  \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eControls are provided for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShutter button\u003c\/li\u003e\n\u003cli\u003eON\/OFF (Power) button\u003c\/li\u003e\n\u003cli\u003eW\/T (zoom) lever\u003c\/li\u003e\n\u003cli\u003eMovie button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eMENU button Up\/Down\/Left\/Right buttons\u003c\/li\u003e\n\u003cli\u003eFUNC.\/SET button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe scratch-resistant glass lens port provides full use of the camera's zoom range without vignetting.  The front of the port accepts press-on color correcting filters and is 67mm threaded for the attachment of optional accessories.\u003c\/li\u003e\n\u003cli\u003eA custom ABS-PC blend housing with acetyl controls provides strength, UV protection, and fundamentally corrosion-free performance.\u003c\/li\u003e\n\u003cli\u003eA central 1\/4-20 tripod mount on the bottom of the housing is the perfect attachment point for stabilizing trays and constant-on lighting.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and individually tested for fit, function, and waterproof integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003e3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses.  Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-wd-3-wide-angle-conversion-dome\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite WD-3 Wide Angle Dome\u003c\/a\u003e provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-w-30-0-59x-wide-angle-lens-with-67mm-threads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite W-30 Wide Angle Lens\u003c\/a\u003e, \u003ca href=\"https:\/\/reefphoto.com\/products\/inon-uwl-h100-28m67-type-1-wide-angle-conversion-lens\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eINON UWL-H100 M67 Wide Angle Lens\u003c\/a\u003e, and other 67mm threaded wide angle lenses, provide a wider maximum angle of view.  Because these are separated from the camera's lens by glass, air, and water, some vignetting and edge distortion will be present.  These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and\/or cropping in post-production.\u003c\/p\u003e\n\u003cp\u003eExternal macro lenses with 67mm threads from INON, Epoque, and other manufacturers, can be attached directly to the front of the housing's port.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-ur-pro-blue-water-filter-for-3-0-inch-ports\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3-inch diameter color filters\u003c\/a\u003e press directly onto these ports.  Most wide angle lenses require a 3.6-inch diameter color filter.\u003c\/p\u003e\n\u003ch3\u003e What's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eLanyard\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eSlightly positive buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eCentral 1\/4-20 tripod thread tray mounting\u003c\/li\u003e\n\u003cli\u003eWeight 17.8 oz (505 g)\u003c\/li\u003e\n\u003cli\u003eDimensions 6 x 4.6 x 4.5 inches (152 x 117 x 144 mm)\u003c\/li\u003e\n\u003cli\u003e3 inch (76 mm) diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts List\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0132.45 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0200  Port Cover\u003c\/li\u003e\n\u003cli\u003e0184.2 Silicone Lubricant in resealable 2cc tube.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7278478295083,"sku":"ike.6245.08","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Ikelite_Action_Housing_for_Canon_G7X_Mark_II.jpg?v=1574012378"},{"product_id":"ikelite-action-housing-for-sony-rx100-mark-1-mark-2","title":"Ikelite Action Housing for Sony RX100 Mark 1, Mark 2","description":"\u003cp\u003eThis Action Housing is for Sony RX100 Mark 1 or RX100 Mark 2.   Ikelite Action Housing is also available for RX100 Mark 3 or Mark 4\u003c\/p\u003e\n\u003cp\u003eAction Housings are designed with water sports and travel in mind: built tough yet compact and lightweight.\u003c\/p\u003e\n\u003cp\u003eCompact Action Housings are also perfect for the outdoor adventurer.  A hard cased housing provides both protection and functionality way beyond the plastic bag alternative.  And unlike a traditional dive housing, the compact Action Housing won't add excessive bulk to your backpack.\u003c\/p\u003e\n\u003cp\u003eThe Action Housing is perfect for white water rafting, wind surfing, mud runs, or any activity with an anti-camera environment.  Also suitable for snorkeling.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe camera's built in flash cannot be used inside of the housing.  This housing is not compatible with a strobe.  \u003c\/em\u003eOther housings for the Sony RX100 M2 provide more controls and compatibility with underwater strobes.\u003c\/p\u003e\n\u003cp\u003eControls are provided for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShutter button\u003c\/li\u003e\n\u003cli\u003eON\/OFF (Power) button\u003c\/li\u003e\n\u003cli\u003eW\/T (zoom) lever\u003c\/li\u003e\n\u003cli\u003eMovie button\u003c\/li\u003e\n\u003cli\u003eFn button\u003c\/li\u003e\n\u003cli\u003eMENU button Up\/Down\/Left\/Right buttons\u003c\/li\u003e\n\u003cli\u003eFUNC.\/SET button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eDelete button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccess to important camera functions including the menu and manual white balance.  Functions are clearly engraved with the same symbols that are on the camera.  Engraved markings will never fade or fall off.\u003c\/li\u003e\n\u003cli\u003eThe scratch-resistant glass lens port provides full use of the camera's zoom range without vignetting.  The front of the port accepts press-on color correcting filters and is 67mm threaded for the attachment of optional accessories.\u003c\/li\u003e\n\u003cli\u003eA custom ABS-PC blend housing with acetyl controls provides strength, UV protection, and fundamentally corrosion-free performance.\u003c\/li\u003e\n\u003cli\u003eA central 1\/4-20 tripod mount on the bottom of the housing is the perfect attachment point for stabilizing trays and constant-on lighting.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and individually tested for fit, function, and waterproof integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003e3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses.  Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-wd-3-wide-angle-conversion-dome\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite WD-3 Wide Angle Dome\u003c\/a\u003e provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-w-30-0-59x-wide-angle-lens-with-67mm-threads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite W-30 Wide Angle Lens\u003c\/a\u003e, \u003ca href=\"https:\/\/reefphoto.com\/products\/inon-uwl-h100-28m67-type-1-wide-angle-conversion-lens\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eINON UWL-H100 M67 Wide Angle Lens\u003c\/a\u003e, and other 67mm threaded wide angle lenses, provide a wider maximum angle of view.  Because these are separated from the camera's lens by glass, air, and water, some vignetting and edge distortion will be present.  These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and\/or cropping in post-production.\u003c\/p\u003e\n\u003cp\u003eExternal macro lenses with 67mm threads from INON, Epoque, and other manufacturers, can be attached directly to the front of the housing's port.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-ur-pro-blue-water-filter-for-3-0-inch-ports\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3-inch diameter color filters\u003c\/a\u003e press directly onto these ports.  Most wide angle lenses require a 3.6-inch diameter color filter.\u003c\/p\u003e\n\u003ch3\u003e What's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eLanyard\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eSlightly positive buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eCentral 1\/4-20 tripod thread tray mounting\u003c\/li\u003e\n\u003cli\u003eWeight 17.8 oz (505 g)\u003c\/li\u003e\n\u003cli\u003eDimensions 6 x 4.6 x 4.5 inches (152 x 117 x 144 mm)\u003c\/li\u003e\n\u003cli\u003e3 inch (76 mm) diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7278657667115,"sku":"ike.6215.02","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/undewater_housing_for_Sony_RX100.jpg?v=1574012378"},{"product_id":"ikelite-underwater-housing-for-olympus-tg-3-tg-4","title":"Ikelite Underwater Housing for Olympus TG-3 \/ TG-4","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Underwater Housing for Olympus TG-3 or TG-4\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic side-mounted shutter lever\u003c\/li\u003e\n\u003cli\u003eImproved returning zoom control\u003c\/li\u003e\n\u003cli\u003eUniversal 1\/4-20 threaded tray mounting\u003c\/li\u003e\n\u003cli\u003eNew white ABS-PC blend\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe housing port is designed to accept 3.0-inch diameter color filters, and wide angle or macro options with 67mm threads.  Light is absorbed very quickly as it passes through water.  A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water.  The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through.  The results speak for themselves - photos with the best color, exposure and clarity possible.\u003c\/p\u003e\n\u003ch3\u003eMacro\u003c\/h3\u003e\n\u003cp\u003eThe TG-3 and TG-4 perform some of the best macro-photography among point-and-shoot cameras.  If desired, external close-up lens (diopter) may be directly mounted to the 67mm threaded port.\u003c\/p\u003e\n\u003ch3\u003eWide Angle\u003c\/h3\u003e\n\u003cp\u003eThe 67mm threaded port is ready to accept wide angle lenses and domes.  Some suitable choices are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-wd-3-wide-angle-conversion-dome\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite WD-3\u003c\/a\u003e wide angle conversion dome\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-w-30-0-59x-wide-angle-lens-with-67mm-threads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite W-30\u003c\/a\u003e wide angle lens\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/inon-uwl-h100-28m67-type-1-wide-angle-conversion-lens\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInon UWL-H100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/fantasea-bigeye-67mm-mark-ii\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFantasea 67mm Bigeye\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eDue to the position of the camera's built-in flash, it is not suitable for use underwater.  This housing has two \"Sea \u0026amp; Sea style\" fiber optic cable ports to make easy operation of external strobe(s).\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eVinyl break-away safety lanyard\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions except INFO button\u003c\/li\u003e\n\u003cli\u003eSlightly positive buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003e1\/4 - 20 thread tray mounting\u003c\/li\u003e\n\u003cli\u003eWeight 1.1 lb (500 g)\u003c\/li\u003e\n\u003cli\u003eDimensions 6.2 x 5.5 x 3.6 in (158 x 141 x 85 mm) including projections\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpare Parts\u003c\/h3\u003e\n\u003cp\u003eNot included:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0132.45 Main o-ring\u003c\/li\u003e\n\u003cli\u003e0119.2 Port o-ring\u003c\/li\u003e\n\u003cli\u003e0200  Port cover\u003c\/li\u003e\n\u003cli\u003e0184.2  Silicone lubricant resealable 2cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7287154966571,"sku":"ike.6233.04","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6233.04.jpg?v=1574012379"},{"product_id":"ikelite-underwater-housing-for-olympus-tg-5","title":"Ikelite Underwater Housing for Olympus TG-5, TG-6","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eA full-featured and durable waterproof housing for Olympus Tough TG-5 and TG-6 cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe Ikelite housing for this popular camera model has been designed for ergonomic underwater use. A side-mounted shutter lever makes shooting a breeze. Hard anodized aluminum and acetyl controls operate smoothly and are fully serviceable for many years of enjoyment.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTwo 1\/4-20 mounts on the bottom of the housing allow the rotation-free attachment of optional trays and lighting arms.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur ABS-PC blend housing material provides strength and corrosion-free performance year after year. The specially formulated color deflects the sunlight to keep your camera running cooler, longer. Durable construction keeps the system watertight shallow and at depths up to 200ft (60m).\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.\u003c\/p\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eDue to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eAny current model Ikelite DS strobe can be triggered fiber optically with true automatic Olympus TTL exposure using the \u003ca href=\"https:\/\/reefphoto.com\/products\/rc1-olympus-panasonic-ttl-receiver-for-ds-strobes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite RC1 TTL Receiver\u003c\/a\u003e and \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-fiber-optic-cable-s-s-style\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFiber Optic Cord # 4501\u003c\/a\u003e. The AF35 strobe is not compatible with this housing.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003eOur 3\" diameter ports feature a 67mm thread on the front for the easy attachment of external wide-angle and macro wet lenses. Wide-angle lenses make objects appear smaller so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger so that tiny creatures will fill your frame.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-dc-6-inch-dome-for-compact-housings-choose-version\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite DC1 6\" Dome Port # 6401\u003c\/a\u003e offers the best of everything: wide-angle, macro, and over-under all on one dive. This special dome port replaces the housing's standard port and provides a sharp 25mm wide-angle, full zoom through and macro capabilities, and is perfect for split shots (half-in, half-out of the water).\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-wd-3-wide-angle-conversion-dome\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite WD-3 Wide Angle Dome # 6430.3\u003c\/a\u003e attaches to the front of the standard port and provides a mid-range angle of view with no vignetting (dark shadows in the corners of the image).\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-w-30-0-59x-wide-angle-lens-with-67mm-threads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite W-30 Wide Angle Lens # 6430\u003c\/a\u003e, \u003ca href=\"https:\/\/reefphoto.com\/products\/inon-uwl-h100-28m67-type-1-wide-angle-conversion-lens\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInon UWL-H100\u003c\/a\u003e, \u003ca href=\"https:\/\/reefphoto.com\/products\/fantasea-bigeye-67mm-mark-ii\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFantasea 67mm Bigeye\u003c\/a\u003e and other 67mm threaded wide-angle lenses, provide a wider maximum angle of view. Because these are separated from the camera's lens by glass, air, and water, some vignetting and edge distortion will be present. These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and\/or cropping in post-production.\u003c\/p\u003e\n\u003cp\u003eExternal macro lenses with 67mm threads from INON, and other manufacturers, can be attached directly to the front of the housing's port.\u003c\/p\u003e\n\u003cp\u003e3\" diameter color filters press directly onto these ports. Most wide-angle lenses require a 3.6\" diameter color filter. Refer to the product page for information on color filter compatibility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eO-ring # 0132.45\u003c\/li\u003e\n\u003cli\u003ePort cover # 0200\u003c\/li\u003e\n\u003cli\u003eLanyard # 0321.10\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions except Log Switch\u003c\/li\u003e\n\u003cli\u003eSlightly positive buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003e1\/4 - 20 thread tray mounting\u003c\/li\u003e\n\u003cli\u003eWeight 1.1 lb (500 g)\u003c\/li\u003e\n\u003cli\u003eDimensions 158 x 112 x 94 mm 6.2 x 4.4 x 3.7 inch including projections\u003c\/li\u003e\n\u003cli\u003e3.0-inch diameter glass lens port\u003c\/li\u003e\n\u003cli\u003e2 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n*Camera not included; shown for illustrative purposes only.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7287260413995,"sku":"ike.6233.06","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6233.06.jpg?v=1574012379"},{"product_id":"ikelite-action-housing-for-canon-g9x-mark-i-mark-ii","title":"Ikelite Action Housing for Canon G9X Mark I, Mark II","description":"\u003cp\u003e\u003cspan size=\"5\" style=\"font-size: x-large;\"\u003e\u003cstrong\u003eIkelite Action Housing for Canon G9X Mark I and Mark II\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCamera not included; shown for illustrative purposes only.\u003c\/p\u003e\n\u003cp\u003eAction Housings are designed with water sports and travel in mind: built tough yet compact and lightweight.\u003c\/p\u003e\n\u003cp\u003eCompact Action Housings are also perfect for the outdoor adventurer.  A hard cased housing provides both protection and functionality way beyond the plastic bag alternative.  And unlike a traditional dive housing, the compact Action Housing won't add excessive bulk to your backpack.\u003c\/p\u003e\n\u003cp\u003eThe Action Housing is perfect for white water rafting, wind surfing, mud runs, or any activity with an anti-camera environment.  Also suitable for snorkeling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eThe camera's built in flash cannot be used inside of the housing.  This housing is not compatible with a strobe.  \u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eControls are provided for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShutter button\u003c\/li\u003e\n\u003cli\u003eON\/OFF (Power) button\u003c\/li\u003e\n\u003cli\u003eW\/T (zoom) lever\u003c\/li\u003e\n\u003cli\u003eMovie button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTouch screen can not be operated with camera in the housing.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe scratch-resistant glass lens port provides full use of the camera's zoom range without vignetting.  The front of the port accepts press-on color correcting filters and is 67mm threaded for the attachment of optional accessories.\u003c\/li\u003e\n\u003cli\u003eA custom ABS-PC blend housing with acetyl controls provides strength, UV protection, and fundamentally corrosion-free performance.\u003c\/li\u003e\n\u003cli\u003eA central 1\/4-20 tripod mount on the bottom of the housing is the perfect attachment point for stabilizing trays and constant-on lighting.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and individually tested for fit, function, and waterproof integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWide Angle, Macro + Filters\u003c\/h3\u003e\n\u003cp\u003e3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses.  Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-wd-3-wide-angle-conversion-dome\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite WD-3 Wide Angle Dome\u003c\/a\u003e provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-w-30-0-59x-wide-angle-lens-with-67mm-threads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIkelite W-30 Wide Angle Lens\u003c\/a\u003e, \u003ca href=\"https:\/\/reefphoto.com\/products\/inon-uwl-h100-28m67-type-1-wide-angle-conversion-lens\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eINON UWL-H100 M67 Wide Angle Lens\u003c\/a\u003e, and other 67mm threaded wide angle lenses, provide a wider maximum angle of view.  Because these are separated from the camera's lens by glass, air, and water, some vignetting and edge distortion will be present.  These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and\/or cropping in post-production.\u003c\/p\u003e\n\u003cp\u003eExternal macro lenses with 67mm threads from INON, Epoque, and other manufacturers, can be attached directly to the front of the housing's port.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-ur-pro-blue-water-filter-for-3-0-inch-ports\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e3-inch diameter color filters\u003c\/a\u003e press directly onto these ports.  Most wide angle lenses require a 3.6-inch diameter color filter.\u003c\/p\u003e\n\u003ch3\u003e What's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003ePort cover\u003c\/li\u003e\n\u003cli\u003eLanyard\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eSlightly positive buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eCentral 1\/4-20 tripod thread tray mounting\u003c\/li\u003e\n\u003cli\u003eWeight 17.8 oz (505 g) without camera\u003c\/li\u003e\n\u003cli\u003eDimensions 6 x 4.6 x 4.5 inches (152 x 117 x 144 mm)\u003c\/li\u003e\n\u003cli\u003e3 inch (76 mm) diameter glass lens port\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7292021538859,"sku":"ike.6245.09","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/Action_and_Surf_Housing_for_Canon_G9x.jpg?v=1574012380"},{"product_id":"ikelite-ultracompact-housing-replacement-latch-buckle","title":"Ikelite ULTRAcompact Housing Replacement Latch \/ Buckle","description":"","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":7343678619691,"sku":"ike.9054.3","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.9054.3.jpg?v=1574012388"},{"product_id":"ikelite-200dlm-a-underwater-ttl-housing-for-olympus-om-d-e-m10-mark-iii-mirrorless-micro-four-thirds-cameras","title":"Ikelite 200DLM\/A Underwater TTL Housing for Olympus OM-D E-M10 Mark III Mirrorless Micro Four-Thirds Cameras","description":"\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear o-ring # 0110 \u003cem\u003e(installed)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFront o-ring # 0132.36\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(installed)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWaterproof bulkhead cap # 9104.5\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(installed)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSilicone lubricant # 0184.2\u003c\/p\u003e\n\u003cp\u003e1 year limited warranty\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional Accessories\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSpare Rear O-Ring # 0110\u003c\/strong\u003e  \u003cem\u003eCarry a b\u003c\/em\u003e\u003cem\u003eack-up in case the original seal becomes damaged.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpare Front O-Ring # 0132.45\u003c\/strong\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003e\u003cem\u003eCarry a b\u003c\/em\u003e\u003cem\u003eack-up in case\u003c\/em\u003e\u003c\/span\u003e\u003cem\u003e the original seal becomes damaged.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVacuum Kit for 1\/2\" Accessory Port # 47012\u003c\/strong\u003e  C\u003cem\u003eheck for leaks prior to entering the water.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTray with Dual Quick Release Handles # 9523.64 \u003c\/strong\u003e \u003cem\u003eAdd a tray for easier handling and a second attachment point for strobes or lights.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShutter Trigger Extension # 4077.93\u003c\/strong\u003e  \u003cem\u003eBrings shutter and\/or AEL\/AFL \/ Fn1 lever out to handle for more comfortable use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e45º Magnified Viewfinder (Type 3) # 6891.3\u003c\/strong\u003e  \u003cem\u003eBrighter, larger, and more ergonomic positioning when shooting underwater. Rotates for landscape or portrait shots.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAdding an external strobe or video light enhances your photos' color and sharpness underwater. If you will be shooting below 30 ft (10m) or in an indoor pool, your photos will be predominantly blue-green without an artificial light source. \u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003ch2 class=\"product__description-label\"\u003eABOUT THIS PRODUCT\u003c\/h2\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eA professional-grade, compact waterproof housing for Olympus OM-D E-M10 Mark III mirrorless micro four-thirds cameras. Perfect for any application in or around the water from scuba to surf to pool.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003eThis housing requires the addition of a compatible DLM Lens Port for waterproof operation. Lens Port not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp class=\"pp-h2\"\u003eThe Olympus OM-D E-M10 Mark III is a powerful compact interchangeable lens camera. Customizable controls, a TTL flash hot shoe, and a tilting LCD screen make it a good choice for underwater use. The E-M10 Mark III features a 16MP CMOS sensor, 4K\/UHD video at 24p and 30p, and a 121-point contrast-detect AF system.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eTrue TTL exposure\u003c\/h3\u003e\n\u003cp\u003eProper strobe exposure is the #1 most important contributor to sharp and colorful underwater photos, particularly below 30ft\/10m. This is the only housing to include an integrated TTL circuit fine-tuned to the Olympus O-MD E-M10 Mark III flash exposure protocol for the fastest and most accurate exposure possible.\u003c\/p\u003e\n\u003cp\u003eTTL communication by electrical sync cord improves camera battery life and recycle time, meaning you get many times more strobe-lit shots when you need them. \u003c\/p\u003e\n\u003cp\u003eThe TTL circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control.\u003c\/p\u003e\n\u003cp\u003eAt this time, only Ikelite DS strobes are capable of powering the TTL circuitry. Non-Ikelite strobes featuring an electrical bulkhead may be attached by sync cord but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003ch3\u003eBuilt-in Flash\u003c\/h3\u003e\n\u003cp\u003eThe camera's built-in flash may be used to trigger external fiber optic strobes. Two fiber optic ports are provided on the top of the housing for the attachment of compatible fiber optic cords (see compatibility information below). The built-in flash is not suitable for lighting a subject underwater. \u003c\/p\u003e\n\u003ch3\u003eConstant-On Lighting\u003c\/h3\u003e\n\u003cp\u003eA bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.\u003c\/p\u003e\n\u003cp\u003eLight is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away.\u003c\/p\u003e\n\u003cp\u003eThere is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any camera system.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eExtensive Lens Support\u003c\/h3\u003e\n\u003cp\u003eHigh quality yet affordable optics are available for an extensive range of micro four-thirds lenses from wide-angle fisheye to macro. \u003c\/p\u003e\n\u003cp\u003eThe DLM port system is designed to be tough enough for heavy surf and without complex mechanisms for supreme reliability in remote locations.\u003c\/p\u003e\n\u003cp\u003eOur custom optical grade acrylic domes provide the color, clarity, and durability of glass at a fraction of the travel weight and cost. Glass flat ports are available for macro lenses.\u003c\/p\u003e\n\u003cp\u003eLens port sold separately. A compatible lens port is required for waterproof use.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eControls and Ergonomics\u003c\/h3\u003e\n\u003cp\u003eA trigger-type shutter lever control is designed for optimal sensitivity and a natural motion when shooting underwater. The standard control hugs the side of the housing for comfortable use when hand-holding.\u003c\/p\u003e\n\u003cp\u003eThe AEL\/AFL button is accessed by a lever for convenient access to customizable functions. Try using the back button focus via the AFL button for shooting small or fast-moving subjects.\u003c\/p\u003e\n\u003cp\u003eBoth shutter and AEL\/AFL \/ Fn1 levers can be easily extended using the optional Shutter Trigger Extension # 4077.93 for more comfortable reach when using a handle grip. \u003c\/p\u003e\n\u003cp\u003eSoft-touch knobs are easy to grip with or without gloves on and provide quick access to important controls including front and rear dials and the mode control. \u003c\/p\u003e\n\u003cp\u003eHard anodized aluminum push buttons are extremely lightweight and resistant to salt build-up and corrosion. The video record start\/stop button is bright red anodized to stand out so that you never miss the action. The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003ch3\u003eCamera Installation\u003c\/h3\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface. \u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask.\u003c\/p\u003e\n\u003cp\u003eGet the brightest and sharpest view of the camera's OLED EVF by adding an optional Magnified Viewfinder. The Supereye removes quickly and easily for the attachment of a Straight Enhanced Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3\u003c\/p\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable through the back of the housing and can be tilted prior to installation in the housing for a better view underwater.\u003c\/p\u003e\n\u003ch3\u003eAccessory Mounting\u003c\/h3\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle grips. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003eSealing and Testing \u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThere is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easy installation of the optional Vacuum Kit # 47012. A hand pump with a gauge allows you to draw a vacuum on the housing to simulate water pressure and check for leaks prior to entering the water.\u003c\/p\u003e\n\u003cp\u003eEvery unit is water pressure tested to 200 feet (60m) before it leaves our facility in Indianapolis.\u003c\/p\u003e\n\u003ch3\u003eDurability and Corrosion Free Performance\u003c\/h3\u003e\n\u003cp\u003eA custom ABS-PC blend housing provides strength and performance year after year with minimal maintenance. The ABS-PC material is fundamentally corrosion-proof and considerably lighter than aluminum. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for an enhanced view of the camera, LCD screen, and o-ring seal. \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. We back our products with over 50 years of experience and the best reputation for service within the dive industry.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cspan\u003eDifferences in lens and control placement prevent the older Olympus O-MD E-M10 Mark I or II cameras from being used in this housing. The E-M10 Mark III camera is not compatible with any other Ikelite housing models.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200 ft (60m) depth rating\u003c\/p\u003e\n\u003cp\u003eDLM\/A port mount\u003c\/p\u003e\n\u003cp\u003eControls for all important camera functions\u003c\/p\u003e\n\u003cp\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded tray mounts with 3\" (76mm) spacing\u003c\/p\u003e\n\u003cp\u003eSlightly negative buoyancy in freshwater\u003c\/p\u003e\n\u003cp\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/p\u003e\n\u003cp\u003e3.7 lb (1691 g)\u003c\/p\u003e\n\u003cp\u003e7.37 x 6 x 5.5\" (187 x 152 x 139 mm)\u003c\/p\u003e\n\u003cp\u003eABS-PC, acrylic, and acetyl construction\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":10886949961771,"sku":"ike.6950.13","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/ike.6950.13.jpg?v=1574012414"},{"product_id":"ikelite-underwater-housing-for-sony-cyber-shot-rx100-mark-iii-mark-iv-mark-v","title":"Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark III, IV, V, V(A)","description":"\u003cp\u003eA full featured and durable underwater housing for Sony Cyber-shot RX100 III, IV, and V cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eThere's no greater assurance than being able to see the o-ring seal. Simply close the two double-passivated stainless steel locking lid snaps, and see the o-ring form a solid black, watertight seal. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur new white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.\u003c\/p\u003e\n\u003ch3\u003eErgonomics\u003c\/h3\u003e\n\u003cp\u003eA new slide-in, front loading camera mounting tray makes this housing a breeze to set up and shoot. Controls are provided for all important camera functions including a re-designed, spring loaded rear dial control. Rear push button controls are laser engraved for identification with a new bright red push button for the video record start\/stop. A sensitive shutter lever makes it easy to half-depress the trigger for focusing and metering.\u003c\/p\u003e\n\u003cp\u003eUse the camera's built-in WiFi feature to download photos to another device without removing the camera from the housing. The WiFi feature is only usable above water within close proximity to the connected device.\u003c\/p\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eDue to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords.\u003c\/p\u003e\n\u003cp\u003eAny Ikelite DS strobe may be connected using the Fiber Optic Converter # 4401.1 and Fiber Optic Cord # 4501. The AF35 strobe is not compatible with this housing.\u003c\/p\u003e\n\u003ch3\u003eWide Angle, Macro \u0026amp; Filters\u003c\/h3\u003e\n\u003cp\u003eOur 3-inch diameter ports feature a 67mm thread on the front for the easy attachment of external wide angle and macro wet lenses. Wide angle lenses make objects appear smaller, so that you can fit more into your frame underwater. Macro close-up lenses make small objects appear larger, so that tiny creatures will fill your frame.\u003c\/p\u003e\n\u003cp\u003eThe WD-3 Wide Angle Dome provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).\u003c\/p\u003e\n\u003cp\u003eThe W-30 Wide Angle Lens, INON UWL-H100, and other 67mm threaded wide angle lenses, provide a wider maximum angle of view. Because these are separated from the camera's lens by glass, air, and water, some vignetting and edge distortion will be present. These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and\/or cropping in post-production.\u003c\/p\u003e\n\u003cp\u003eExternal macro lenses with 67mm threads from INON, Epoque, and other manufacturers, can be attached directly to the front of the housing's port.\u003c\/p\u003e\n\u003cp\u003e3-inch diameter color filters press directly onto these ports. Most wide angle lenses require a 3.6-inch diameter color filter. Refer to the product page for information on color filter compatibility.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eOlder RX100 Mark I and Mark II cameras are not usable in this housing due to differences in lens and control placement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200 ft (60 m) depth rating\u003c\/p\u003e\n\u003cp\u003eControls for all camera functions except Flash switch and Viewfinder switch\u003c\/p\u003e\n\u003cp\u003eSlightly negative buoyancy in fresh water\u003c\/p\u003e\n\u003cp\u003e1\/4-20 threaded tray mounting with 3\" (76mm) spacing\u003c\/p\u003e\n\u003cp\u003eWeighs 2.6 lb (1180 g)\u003c\/p\u003e\n\u003cp\u003e6.8 x 5 x 5.4\" (173 x 127 x 137 mm)\u003c\/p\u003e\n\u003cp\u003e3\" diameter glass lens port\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear o-ring # 0109\u003c\/p\u003e\n\u003cp\u003eVinyl port cover # 0200\u003c\/p\u003e\n\u003cp\u003eSilicone lubricant # 0184.1\u003c\/p\u003e\n\u003cp\u003e1 year manufacturer warranty\u003c\/p\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":11681166491691,"sku":"ike.6116.15","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6116.15-sony-rx100-III-IV-V-a_1024x1024_b216be93-679a-42bd-88c5-1cc9ace398c0.jpg?v=1579294739"},{"product_id":"200dl-underwater-housing-for-canon-eos-70d-dslr-cameras","title":"Ikelite 200DL Underwater Housing for Canon EOS 70D DSLR Cameras","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eA full-featured and durable waterproof housing for Canon EOS 70D DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eThis housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eIntroduced in 2013, the Canon EOS 70D has a 20.2MP Dual Pixel CMOS AF sensor with good autofocus capabilities. The APS-C crop sensor is great underwater for both close-up works with either a 60mm or 100mm Macro lens and wide-angle with the fantastic Tokina 10-17mm Fisheye.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ikelite.com\/blogs\/photo-galleries\/canon-eos-70d-underwater-photos\" target=\"_blank\" title=\"Underwater Photos with Canon EOS 70D\" rel=\"noopener noreferrer\"\u003eSee underwater photos taken with the Canon EOS 70D \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLens Ports\u003c\/h3\u003e\n\u003cp\u003eThis housing features our robust new Dry Lock (DL) port system. \"Dry Lock\" refers to the placement of the o-ring on the outside of the port mount. This improves visibility and reduces the chances of water dropping onto your precious camera sensor. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine-tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the \u003ca href=\"http:\/\/docs.ikelite.com\/reference\/port-chart-dl-system.pdf\" target=\"_blank\" title=\"DL Port Chart\" rel=\"noopener noreferrer\"\u003eDL System Port Chart\u003c\/a\u003e to choose the correct gear. Zoom gears sold separately.\u003c\/p\u003e\n\u003ch4\u003eLegacy Four Lock Port Compatibility\u003c\/h4\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed using a T15 Torx bit and replaced with old style Port Locks for FL Port System (Set of 4) # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. The housing cannot be converted back and forth repeatedly. There are significant advantages to upgrading your lens ports which you can read about \u003ca href=\"https:\/\/www.ikelite.com\/blogs\/product-tutorials\/about-the-dry-lock-port-system\" title=\"About the Ikelite Dry Lock Port System\"\u003ehere\u003c\/a\u003e. If you're shooting an 8\" diameter dome, you'll also save almost 2 pounds by switching to the DL version.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. The use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.\u003c\/p\u003e\n\u003cp\u003eThere is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.\u003c\/p\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eThis housing supports your choice of shooting manual strobes or adding TTL electronics depending on your application.\u003c\/p\u003e\n\u003cp\u003eYou can enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit # 46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003cp\u003eThe flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hot shoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eControls and Set-Up\u003c\/h3\u003e\n\u003cp\u003eShutter and AF-ON levers stand out with super sensitive and natural feeling curved levers.  Both controls can be extended using the optional Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eAll push-button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Super-Eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Enhanced Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3. The angle of a 45º viewfinder is more ergonomic when shooting underwater plus it provides a larger and brighter view than the standard Super-Eye.\u003c\/p\u003e\n\u003ch3\u003eHandling \u0026amp; Travel\u003c\/h3\u003e\n\u003cp\u003eThe housing, tray, and handles have been optimized to reduce weight while maintaining strength and durability. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on your needs. The precision-machined aluminum base features 1\/4-20 tripod mounting sockets and additional mounting locations for future accessories. The base and handle can be quickly removed when breaking down your system for travel.\u003c\/p\u003e\n\u003cp\u003eA 1\/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.\u003c\/p\u003e\n\u003cp\u003eIf you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eOur new ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.\u003c\/p\u003e\n\u003cp\u003eEvery housing is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"product__description\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by an electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter # 4403 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with Canon EOS 70D camera as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories. \u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models, including the newer EOS 80D, from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200' (60m) depth rating\u003c\/p\u003e\n\u003cp\u003eCompatible with DL system lens ports\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eControls are provided for all important camera controls; Controls are not provided for LCD panel illumination button, Depth-of-field preview button, Dioptric adjustment knob, \u003c\/span\u003e\u003cspan\u003eMulti function lock switch \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/p\u003e\n\u003cp\u003eNear neutral buoyancy in freshwater\u003c\/p\u003e\n\u003cp\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/p\u003e\n\u003cp\u003e4.8 lb (2.2 kg)\u003c\/p\u003e\n\u003cp\u003e9.2 x 7.1 x 6.6\" (234 x 180 x 168 mm)\u003c\/p\u003e\n\u003cp\u003eVacuum valve included (pump sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eABS-PC construction is fundamentally corrosion-resistant\u003c\/p\u003e\n\u003cp\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1 year limited warranty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear O-ring # 0132.59 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eFront O-ring # 0132.45 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/p\u003e\n\u003cp\u003ePort Hole Cover # 0200.92 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eWaterproof Bulkhead Cap # 9104.5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eZoom Gear Retainer # 75900 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/p\u003e\n\u003cp\u003e4-40 Hex Key # 0945.11\u003c\/p\u003e\n\u003cp\u003e1\/16\" Hex Key # 0945.16\u003c\/p\u003e\n\u003cp\u003e1\/8\" Hex Key # 0945.18\u003c\/p\u003e\n\u003cp\u003eControl + Push Button Tip Assortment # 9249\u003c\/p\u003e\n\u003cp\u003eSilicone Lubricant 2cc Tube # 0184.2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":13527246798891,"sku":"ike.71712","price":1895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71712-canon-70d-c_1024x1024_938bdabc-ccd3-4314-a47a-468413ead1f3.jpg?v=1574012450"},{"product_id":"200dl-underwater-housing-for-canon-eos-6d-dslr-cameras","title":"Ikelite 200DL Underwater Housing for Canon EOS 6D DSLR Cameras","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"product__description-label\"\u003eABOUT THIS PRODUCT\u003c\/h2\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eA full-featured and durable waterproof housing for Canon EOS 6D DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eThis housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eLens Ports\u003c\/h3\u003e\n\u003cp\u003eThis housing features our robust new Dry Lock (DL) port system. \"Dry Lock\" refers to the placement of the o-ring on the outside of the port mount. This improves visibility and reduces the chances of water dropping onto your precious camera sensor. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine-tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the \u003ca href=\"http:\/\/docs.ikelite.com\/reference\/port-chart-dl-system.pdf\" target=\"_blank\" title=\"DL Port Chart\" rel=\"noopener noreferrer\"\u003eDL System Port Chart\u003c\/a\u003e to choose the correct gear. Zoom gears sold separately.\u003c\/p\u003e\n\u003ch4\u003eLegacy Four Lock Port Compatibility\u003c\/h4\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed using a T15 Torx bit and replaced with old style \u003cstrong\u003ePort Locks for FL Port System (Set of 4) # 5509.04\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. The housing cannot be converted back and forth repeatedly. There are significant advantages to upgrading your lens ports which you can read about \u003ca href=\"https:\/\/www.ikelite.com\/blogs\/product-tutorials\/about-the-dry-lock-port-system\" target=\"_blank\" title=\"About the Ikelite Dry Lock Port System\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e. If you're shooting an 8\" diameter dome, you'll also save almost 2 pounds by switching to the DL version.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. The use of the vacuum valve requires a compatible \u003cstrong\u003eVacuum Pump with Gauge # 47011\u003c\/strong\u003e, sold separately.\u003c\/p\u003e\n\u003cp\u003eThere is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.\u003c\/p\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eThis housing supports your choice of shooting manual strobes or adding TTL electronics depending on your application. Our new modular electronics system allows the housing to be updated with future strobe communications products as they become available. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hot shoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003cp\u003eYou can enjoy the fastest and most accurate TTL exposure on the market by adding the \u003cstrong\u003eCT1K Canon TTL Kit # 46070\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003ch3\u003eControls and Set-Up\u003c\/h3\u003e\n\u003cp\u003eShutter and AF-ON levers stand out with super sensitive and natural feeling curved levers.  Both controls can be extended using the optional \u003cstrong\u003eShutter Trigger Extension # 4077.93\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor more comfortable use when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eAll push-button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Super-Eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional \u003cstrong\u003eStraight Enhanced Magnified Viewfinder # 6890.2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor \u003cstrong\u003e45° Magnified Viewfinder (Type 3) # 6891.3\u003c\/strong\u003e. The angle of a 45º viewfinder is more ergonomic when shooting underwater plus it provides a larger and brighter view than the standard Super-Eye.\u003c\/p\u003e\n\u003ch3\u003eHandling \u0026amp; Travel\u003c\/h3\u003e\n\u003cp\u003eThe housing, tray, and handles have been optimized to reduce weight while maintaining strength and durability. The \u003cstrong\u003eRight-Hand Quick Release Handle # 4077.02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(sold separately) can be added or removed depending on your needs. The precision-machined aluminum base features 1\/4-20 tripod mounting sockets and additional mounting locations for future accessories. The base and handle can be quickly removed when breaking down your system for travel.\u003c\/p\u003e\n\u003cp\u003eA 1\/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.\u003c\/p\u003e\n\u003cp\u003eIf you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a \u003cstrong\u003eCable Grip # 4080.07\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAluminum Top Handle # 4080.08\u003c\/strong\u003e. The rigid aluminum version provides additional mounting points for lighting and accessories.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eOur new ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.\u003c\/p\u003e\n\u003cp\u003eEvery housing is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"product__description\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by an electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOptical Slave Converter # 4403\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with Canon EOS 6D camera as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories. \u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models, including the newer EOS 6D Mark II, from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200' (60m) depth rating\u003c\/p\u003e\n\u003cp\u003eCompatible with DL system lens ports\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eControls are provided for all important camera controls; Controls are not provided for LCD panel illumination button, Depth-of-field preview button, Dioptric adjustment knob, \u003c\/span\u003e\u003cspan\u003eMulti function lock switch \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/p\u003e\n\u003cp\u003eNear neutral buoyancy in freshwater\u003c\/p\u003e\n\u003cp\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/p\u003e\n\u003cp\u003e4.8 lb (2.2 kg)\u003c\/p\u003e\n\u003cp\u003e9.2 x 7.1 x 6.6\" (234 x 180 x 168 mm)\u003c\/p\u003e\n\u003cp\u003eVacuum valve included (pump sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eABS-PC construction is fundamentally corrosion-resistant\u003c\/p\u003e\n\u003cp\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1 year limited warranty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear O-ring # 0132.59 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eFront O-ring # 0132.45 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/p\u003e\n\u003cp\u003ePort Hole Cover # 0200.92 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eWaterproof Bulkhead Cap # 9104.5\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e(\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eZoom Gear Retainer # 75900 (\u003cem\u003einstalled\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/p\u003e\n\u003cp\u003e4-40 Hex Key # 0945.11\u003c\/p\u003e\n\u003cp\u003e1\/16\" Hex Key # 0945.16\u003c\/p\u003e\n\u003cp\u003e1\/8\" Hex Key # 0945.18\u003c\/p\u003e\n\u003cp\u003eControl + Push Button Tip Assortment # 9249\u003c\/p\u003e\n\u003cp\u003eSilicone Lubricant 2cc Tube # 0184.2\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":13527267278891,"sku":"ike.71706","price":1895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71706-canon-6d-c_grande_d79304b9-d5f1-4ce1-8cb1-fd31d35c3ed5.jpg?v=1574012450"},{"product_id":"ikelite-underwater-housing-for-sony-cyber-shot-rx100-mark-vi-digital-cameras","title":"Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI\/VII Digital Cameras","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"product__description-label\"\u003eABOUT THIS PRODUCT\u003c\/h2\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eA full featured and durable underwater housing for Sony Cyber-shot RX100 VI and VII digital cameras. Perfect for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eAbout the Sony RX100 VI camera\u003c\/h3\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eMixing speed, reach, and portability, the\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eSony Cyber-shot DSC-RX100 VII\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis a pocket-sized camera packing a wealth of stills and video versatility. This seventh-generation camera in the esteemed RX100 series is the second to feature the impressive 24-200mm-equivalent ZEISS Vario-Sonnar T* lens that covers wide-angle to telephoto focal lengths for greater shooting flexibility in a variety of conditions. Making use of the extended range is a redesigned 20.1MP 1\" Exmor RS CMOS sensor, along with an improved BIONZ X image processor, for fast shooting performance, high sensitivity to ISO 12800, and UHD 4K video recording. The updated sensor design is all about speed and enables blackout-free continuous shooting up to 20 fps for easier subject tracking. Single Burst Shooting also permits shooting at an extreme 90-fps setting for working with the fastest moving subjects. The sensor's design also provides a 357-point hybrid AF system for quick and accurate focus performance and subject tracking in both stills and video modes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eAbout the Sony RX100 VI camera\u003c\/h3\u003e\n\u003cp\u003eSony's 2018 model in the huge RX100 series sports an extended, 24-200mm f\/2.8-4.5 zoom lens with enhanced image stabilization. Having a longer zoom reach compared to previous RX100 models makes this a great choice for overall travel photography.\u003c\/p\u003e\n\u003cp\u003eA large 20MP 1\" sensor and incredibly fast autofocus make for great images above and below the surface... plus stunning 4K UHD video recording all in one very compact body. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eIn the Housing\u003c\/h3\u003e\n\u003cp\u003eThe newer Sony Cyber-shot RX100 VII is compatible with the existing\u003cspan\u003e \u003c\/span\u003eUnderwater Housing for Sony Cyber-shot RX100 VI # 6116.18. There is a slight dimensional difference between RX100 VI and VII cameras which may cause some intermittency of control function with housings that were built prior to the release of the Mark VII.\u003c\/p\u003e\n\u003cp\u003eHousings produced before August 26, 2019 (serial number 72159 and below) were manufactured to the specifications of the older Sony Cyber-shot RX100 VI camera. The screw attaching the rear dial control may interfere with the slightly thicker RX100 VII camera causing intermittency of rear dial and aperture ring controls. Tightening this screw slightly should resolve these issues.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eOur ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.\u003c\/p\u003e\n\u003ch3\u003eErgonomics\u003c\/h3\u003e\n\u003cp\u003eA slide-in, front loading camera mount makes this housing a breeze to set up and shoot. Controls are provided for all important camera functions including front and rear control dials. Controls are placed in an intuitive position and designed for comfortable access whether you're holding the housing or an add-on handle.\u003c\/p\u003e\n\u003cp\u003eA sensitive shutter lever makes it easy to half-depress the trigger for focusing and metering. Rear push button controls are laser engraved for identification with a new bright red push button for the video record start\/stop. \u003c\/p\u003e\n\u003cp\u003eThe camera's large LCD screen can be seen clearly through the back of the housing. The screen can be tilted during installation for more comfortable viewing underwater.\u003c\/p\u003e\n\u003cp\u003eUse the camera's built-in WiFi feature to download photos to another device without removing the camera from the housing. The WiFi feature is only usable above water within close proximity to the connected device.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eFlash\u003c\/h3\u003e\n\u003cp\u003eDue to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords.\u003c\/p\u003e\n\u003cp\u003eAny Ikelite DS strobe may be connected using the Fiber Optic Converter # 4401.1 and Fiber Optic Cord # 4501. The AF35 strobe is not compatible with this housing.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ikelite.com\/blogs\/product-tutorials\/choosing-strobes-for-a-compact-fiber-optic-system\" title=\"Choosing Strobes for a Compact Fiber Optic System\"\u003eRead more about adding a fiber optic strobe...\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe optional Action Tray II with Left Handle # 2605.04 and Action Tray II Extension with Right Handle # 2605.05 provide a balanced grip and are the perfect platform for adding lighting accessories.\u003c\/p\u003e\n\u003cp\u003eThe Action Tray II mounts to the bottom of the housing with two 1\/4-20 threaded screws for secure and rotation-free use. Our uniquely curved grips are rubberized for a comfortable grip and provide a quick release mechanism for adding and removing light arms.\u003c\/p\u003e\n\u003ch3\u003eZoom, super macro, and semi-wide angle\u003c\/h3\u003e\n\u003cp\u003eThe standard 3.9\" diameter optical glass port accommodates the camera's full 24-200mm zoom range underwater. \u003c\/p\u003e\n\u003cp\u003eAdd the press-fit Macro Adapter # 9306.82 with any 67mm threaded macro wet lens for incredibly super macro photography. Compatible wet lenses include but are not limited to the INON UCL-165, Subsee Magnifier, Saga close up lenses, Nauticam CMC-1, and others.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe optional WD-4 Wide Angle Dome # 6430.4 provides a wider angle of view underwater without the edge distortion, vignetting, or weight typically associated with an external wide angle wet lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e3.9\" diameter color filters press directly onto the front of the standard lens port. We offer color filters for Tropical Blue Water # 6441.46, Green Water # 6441.86, and a Yellow Barrier Filter # 6441.16 for fluorescence photography.\u003c\/p\u003e\n\u003ch3\u003eOptional 6\" dry dome\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.ikelite.com\/products\/dc3-6-inch-dome-for-compact-housings-1\" title=\"DC3 6 inch Dome Port\"\u003eDC3 6\" Dome Port\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e# 6403 offers the best of everything: wide angle, macro, and over-under all on one dive. This special dome port replaces the housing's standard port and provides sharp 24mm wide angle and is perfect for split shots (half-in, half-out of the water). Approximately 3\/4 of the camera's zoom range is usable behind the dome and macro images can be captured with the dome installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eOptional wide angle port\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe optional Wide Angle Port M67 for Sony RX100 VI # 9306.02 can be used in place of the housing's standard port for use of 67mm threaded external wide angle wet lenses. This port has been optimized to provide the best combination of wide angle and macro photography. The shorter port length accommodates an effective zoom range of 24-70mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis port is optimized for use with wide angle wet lenses designed for the 28mm equivalent focal length, including the INON UWL-H100, Nauticam WWL-1, and others.  \u003c\/span\u003e\u003cspan\u003eSome vignetting (dark shadows around the edges of the image will be present at wider focal lengths. We recommend zooming to eliminate vignetting or cropping your images in post-production.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe front of the port also accepts 67mm threaded macro wet lenses by INON, Subsee, Saga, Nauticam, and others.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe standard lens port is removed and the Wide Angle Port M67 simply threads into the front of the housing for quick and easy installation. The camera cannot be zoomed past 70mm with this port attached. The camera will shut down if zoomed past this point.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSealing and Vacuum Testing \u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThere is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit # 47012. A hand pump with gauge allows you to draw a vacuum on the housing to simulate water pressure and check for leaks prior to entering the water.\u003c\/p\u003e\n\u003cp\u003eEvery unit is water pressure tested to 200 feet (60m) before it leaves our facility in Indianapolis.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eOlder RX100 Mark I, II, III, IV, and V cameras are not usable in this housing due to differences in lens and control placement. The Sony AG-R2 Attachment Grip is not compatible with this product.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200 ft (60 m) depth rating\u003c\/p\u003e\n\u003cp\u003eControls for all camera functions except Flash switch and Viewfinder switch; camera's built-in flash may be extended during installation\u003c\/p\u003e\n\u003cp\u003eSlightly negative buoyancy in fresh water\u003c\/p\u003e\n\u003cp\u003e1\/4-20 threaded tray mounting with 3\" (76mm) spacing\u003c\/p\u003e\n\u003cp\u003eWeighs 2.8 lb (1270 g)\u003c\/p\u003e\n\u003cp\u003e6.1 x 5.1 x 6.8\" (155 x 130 x 173 mm)\u003c\/p\u003e\n\u003cp\u003e3.9\" diameter glass lens port\u003c\/p\u003e\n\u003cp\u003e2 year limited warranty\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear o-ring # 0109\u003c\/p\u003e\n\u003cp\u003eVinyl port cover # 0200.08\u003c\/p\u003e\n\u003cp\u003eSilicone lubricant # 0184.1\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":14460146122795,"sku":"ike.6116.18","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6116.18-sony-rx100-vi-a_1024x1024_2f07df2a-b1e6-41a8-9a7f-f2a531cbb2c5.jpg?v=1574012456"},{"product_id":"ikelite-200dl-underwater-housing-for-sony-alpha-a7-ii-a7r-ii-a7s-ii-mirrorless-cameras","title":"Ikelite 200DL Underwater Housing for Sony Alpha A7 II, A7R II, A7S II Mirrorless Cameras","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"product__description-label\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cp\u003eA full-featured and durable waterproof housing for Sony Alpha A7 Mark II, A7R Mark II, and A7S Mark II Mirrorless cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eLens Ports\u003c\/h3\u003e\n\u003cp\u003eThe single most important feature is the new Dry Lock (DL) port system. This exciting new system is designed to be robust and easy to assemble. It is built for reliable performance in the most remote of locations, meaning that there are no complex moving parts that may break and jeopardize your shoot.\u003c\/p\u003e\n\u003cp\u003eOur new DL series ports are lighter and more adaptable than their FL counterparts. They accommodate popular large diameter, full-frame lenses with ease. The DL system is essential if you're considering shooting professional quality lenses like the Sony 28mm lens with Fisheye Conversion Lens or Canon 16-35mm f\/2.8L III.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine-tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the \u003ca href=\"http:\/\/docs.ikelite.com\/reference\/port-chart-dl-sony-alpha.pdf\" target=\"_blank\" title=\"DL Port Chart for Sony Alpha Series\" rel=\"noopener noreferrer\"\u003eDL System Port Chart for Sony Alpha Series\u003c\/a\u003e to choose the correct gear. Zoom gears sold separately.\u003c\/p\u003e\n\u003ch4\u003eUsing Legacy Four Lock (FL) Ports\u003c\/h4\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed and replaced with the Port Locks for FL Port System (Set of 4) # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and will incur additional service charges. There are significant advantages to upgrading your lens ports which you can read about \u003ca href=\"http:\/\/www.ikelite.com\/support\/articles\/about-dry-lock-port-system.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e. For example, if you're shooting an 8\" diameter dome, you'll also save almost 2 pounds by using the DL version instead.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel.\u003c\/p\u003e\n\u003cp\u003eThe use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.\u003c\/p\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eThis housing supports your choice of shooting with manual strobe exposure or adding a TTL converter depending on your application. The flash bulkhead is located on the top of the case to alleviate strain on the sync cord. \u003c\/p\u003e\n\u003cp\u003eYou can enjoy the fastest and most accurate TTL exposure on the market by adding the ST1K TTL Kit for Sony Alpha\u003cspan\u003e \u003c\/span\u003e# 46040 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003cp\u003eReliable locking connectors between the hot shoe and bulkhead make it easy to install the optional ST1K TTL Kit for Sony Alpha or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003ch3\u003eControls and Set-Up\u003c\/h3\u003e\n\u003cp\u003eThe shutter and AF\/MF\/AEL button are set apart by ergonomic and sensitive curved lever actuators. Both controls can optionally be extended using the Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle. If you're not already using back button focus, we recommend learning this valuable trick.\u003c\/p\u003e\n\u003cp\u003eAll knob controls are upgraded to our new soft-touch design which gives you extra grip and feels good whether you're diving with gloves or bare hands. Our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eControl placement mimics the way you use the camera on the surface to take advantage of muscle memory and avoid the need to re-learn your camera's controls.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eRear View\u003c\/h3\u003e\n\u003cp\u003eThe clear acrylic back provides a full view of the camera, o-ring, LCD screen. The camera's Access Lamp is visible through the back. The LCD monitor may be tilted during installation for a better viewing angle underwater.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included SuperEye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Enhanced Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3\u003c\/p\u003e\n\u003ch3\u003eHandling \u0026amp; Travel\u003c\/h3\u003e\n\u003cp\u003eOverall the housing is over 1\/2 pound lighter than a typical FL counterpart. Our new hard anodized aluminum base with a quick-release handle has also been streamlined for travel and is over 3\/4 pound lighter than our previous DSLR tray and handle system. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on how you want to shoot. The precision-machined aluminum base features 1\/4-20 tripod mounting sockets and additional mounting locations for future accessories. Plus, the base and handle can be quickly removed when breaking down your system for travel.\u003c\/p\u003e\n\u003cp\u003eA 1\/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.\u003c\/p\u003e\n\u003cp\u003eIf you're shooting with two strobe or lighting arms, then a top handle can be added to make the system easier to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eOur new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun. This material is 1\/3 of the specific gravity of aluminum, making the housing much lighter and fundamentally corrosion-free.\u003c\/p\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.\u003c\/p\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is included on the top of the housing near the bulkhead for expansion to future uses.\u003c\/p\u003e\n\u003cp\u003eLike all of our housings, this product is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).\u003c\/p\u003e\n\u003ch3\u003eIkelite DS Strobes\u003c\/h3\u003e\n\u003cp\u003eIkelite DS series strobes can be used in manual exposure modes when attached directly to the housing using Single Sync Cord # 45151 or Dual Sync Cord # 45152. Install the ST1K Sony Alpha TTL Kit # 46040 for the most accurate exposure and fastest triggering on the market. The TTL Kit installs quickly and easily and requires no batteries to weaken or die during your shoot. Only Ikelite DS strobes are capable of powering up and communicating with the TTL Kit.\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3\u003eSEA\u0026amp;SEA, INON, or Retra Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, or Retra strobes with an electrical connection can be triggered in manual exposure modes using Single Sync Cord # 45281 or Dual Sync Cord # 45282. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by an electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter product # 4405 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with the Sony Alpha A7 II, A7R II, and A7S II cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other camera models from being used in this housing. This housing is not usable A7 (Mark I) or Mark III cameras. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200' (60m) depth rating\u003c\/p\u003e\n\u003cp\u003eCompatible with DL system lens ports\u003c\/p\u003e\n\u003cp\u003eControls are provided for all important camera controls; Controls are not provided for the Diopter adjustment dial, AF\/MF\/AEL switch lever, or Control wheel\u003c\/p\u003e\n\u003cp\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/p\u003e\n\u003cp\u003eNear neutral buoyancy in freshwater\u003c\/p\u003e\n\u003cp\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/p\u003e\n\u003cp\u003e4.8 lb (2.2 kg)\u003c\/p\u003e\n\u003cp\u003e9.3 x 7.0 x 6.5\" (236 x 178 x 168 mm)\u003c\/p\u003e\n\u003cp\u003eVacuum valve included (pump sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eABS-PC construction is fundamentally corrosion-resistant\u003c\/p\u003e\n\u003cp\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2 year limited warranty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear o-ring # 0132.59 (installed)\u003c\/p\u003e\n\u003cp\u003eFront o-ring # 0132.45 (installed)\u003c\/p\u003e\n\u003cp\u003eZoom Gear Retainer # 75900 (installed)\u003c\/p\u003e\n\u003cp\u003ePort Hole Cover # 0200.92 (installed)\u003c\/p\u003e\n\u003cp\u003eWaterproof Bulkhead Cap # 9104.7 (installed)\u003c\/p\u003e\n\u003cp\u003eBase with Left-Hand Quick Release Handle # 4077.67 (installed)\u003c\/p\u003e\n\u003cp\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/p\u003e\n\u003cp\u003e.050\" Hex Key # 0945.11\u003c\/p\u003e\n\u003cp\u003e1\/16\" Hex Key # 0945.16\u003c\/p\u003e\n\u003cp\u003eSilicone Lubricant  # 0184.1\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":14569619423275,"sku":"ike.71472","price":2095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71472-sony-a7r2-c_1024x1024_685e4611-e93f-4cb7-a410-a5873e1285d1.jpg?v=1574012456"},{"product_id":"ikelite-200dl-underwater-housing-for-panasonic-lumix-dc-g9-micro-four-thirds-mirrorless-cameras","title":"Ikelite 200DL Underwater Housing for Panasonic Lumix DC-G9 Micro Four-Thirds Mirrorless Cameras","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"product__description-label\"\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eA full-featured and durable waterproof housing for Panasonic Lumix DC-G9 Micro Four-Thirds Mirrorless cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eThis housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eThe Panasonic Lumix DC-G9 is built for speed. It boasts a large 20MP Four-Thirds CMOS sensor, fantastic in-body image stabilization, and an updated autofocus system. The metal body is weather-sealed with a bright articulating rear LCD display and large, high-resolution electronic viewfinder. The DC-G9 supports high-speed UHS-II media, captures Ultra HD 4K video at up to 60p, and features a high-speed mode capable of up to 180 fps in Full HD.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLens Ports\u003c\/h3\u003e\n\u003cp\u003eThis housing features our robust Dry Lock (DL) port system. \"Dry Lock\" refers to the placement of the o-ring on the outside of the port mount. This improves visibility of the seal and reduces the chances of water dropping onto your precious camera sensor. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine-tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the \u003ca href=\"http:\/\/docs.ikelite.com\/reference\/port-chart-dl-panasonic-gh5.pdf\" target=\"_blank\" title=\"DL Port Chart for Panasonic Cameras\" rel=\"noopener noreferrer\"\u003eDL System Port Chart\u003c\/a\u003e to choose the correct gear. Zoom gears sold separately.\u003c\/p\u003e\n\u003ch4\u003eLegacy Four Lock Port Compatibility\u003c\/h4\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed using a T15 Torx bit and replaced with old style Port Locks for FL Port System (Set of 4) # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. The housing cannot be converted back and forth repeatedly.\u003c\/p\u003e\n\u003cp\u003eThere are significant advantages to upgrading your lens ports which you can read about \u003ca href=\"https:\/\/www.ikelite.com\/blogs\/product-tutorials\/about-the-dry-lock-port-system\" target=\"_blank\" title=\"About the Ikelite Dry Lock Port System\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e. If you're shooting an 8\" diameter dome, you'll also save almost 2 pounds by switching to the DL version. \u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.\u003c\/p\u003e\n\u003cp\u003eThere is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.\u003c\/p\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eThis housing supports your choice of shooting manual strobes or adding TTL electronics depending on your application.\u003c\/p\u003e\n\u003cp\u003eYou can enjoy the fastest and most accurate TTL exposure on the market by adding the PT1K Panasonic TTL Kit with Hotshoe # 46031 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003cp\u003eThe flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hot shoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eControls and Set-Up\u003c\/h3\u003e\n\u003cp\u003eShutter and AF\/AE Lock levers stand out with super sensitive and natural feeling curved levers.  Both controls can be extended using the optional Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eAll push-button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eHandling \u0026amp; Travel\u003c\/h3\u003e\n\u003cp\u003eThe housing, tray, and handles have been optimized to reduce weight while maintaining strength and durability. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on your needs. The precision-machined aluminum base features 1\/4-20 tripod mounting sockets and additional mounting locations for future accessories. The base and handle can be quickly removed when breaking down your system for travel.\u003c\/p\u003e\n\u003cp\u003eA 1\/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or a GoPro camera.\u003c\/p\u003e\n\u003cp\u003eIf you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eOur new ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun. ABS-PC is significantly lighter than aluminum and is fundamentally corrosion-proof.\u003c\/p\u003e\n\u003cp\u003eEvery housing is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"product__description\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by an electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter # 4405 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis housing is only compatible with Panasonic Lumix DC-G9 cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories. \u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other camera models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200' (60m) depth rating\u003c\/p\u003e\n\u003cp\u003eCompatible with DL system lens ports\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eControls are provided for all important camera controls;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eControls are not provided for Drive mode dial, Diopter adjustment dial, Joystick, Front dial, F4 Function button, Preview button\/F5 Function button, Function lever, V.MODE button\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/p\u003e\n\u003cp\u003eNear neutral buoyancy in fresh water\u003c\/p\u003e\n\u003cp\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/p\u003e\n\u003cp\u003e4.8 lb (2.2 kg)\u003c\/p\u003e\n\u003cp\u003e8.9 x 7.3 x 6.5\" (226 x 185 x 165 mm)\u003c\/p\u003e\n\u003cp\u003eVacuum valve included (pump sold separately)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eABS-PC construction is fundamentally corrosion-resistant\u003c\/p\u003e\n\u003cp\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2 year limited warranty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear O-ring # 0132.59 (installed)\u003c\/p\u003e\n\u003cp\u003eFront O-ring # 0132.45 (installed)\u003c\/p\u003e\n\u003cp\u003eZoom Gear Retainer # 75900 (installed)\u003c\/p\u003e\n\u003cp\u003ePort Hole Cover # 0200.92 (installed)\u003c\/p\u003e\n\u003cp\u003eWaterproof Bulkhead Cap # 9104.7 (installed)\u003c\/p\u003e\n\u003cp\u003eBase with Left-Hand Quick Release Handle # 4077.67 (installed)\u003c\/p\u003e\n\u003cp\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/p\u003e\n\u003cp\u003e.050\" Hex Key # 0945.11\u003c\/p\u003e\n\u003cp\u003e1\/16\" Hex Key # 0945.16\u003c\/p\u003e\n\u003cp\u003eSilicone Lubricant  1cc tube\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":15214488256555,"sku":"ike.71307","price":1595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/71307-panasonic-g9-c_1024x1024_e61075fc-a700-4e57-9f62-5eaf39bf5cd5.jpg?v=1574012470"},{"product_id":"ikelite-200dlm-c-underwater-housing-for-nikon-d3500-dslr","title":"Ikelite 200DLM\/C Underwater Housing for Nikon D3500 DSLR","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eThis housing has been discontinued by the manufacturer. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNikon's entry-level DSLR camera provides good image quality and responsiveness in a compact system. The 200DLM\/C Underwater Housing is the perfect companion allowing the use of the Nikon D3500 in or around the water for scuba, snorkeling, surf, pool, or any adventure.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cspan\u003eThis housing requires the addition of a compatible DLM Lens Port for waterproof operation. Lens Port not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch2\u003eAdvantages of the Nikon D3500 System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompact DSLR system is substantially smaller and lighter than most interchangeable lens cameras and housings\u003c\/li\u003e\n\u003cli\u003e24 megapixel still images and 1080p HD video\u003c\/li\u003e\n\u003cli\u003eRAW image capture\u003c\/li\u003e\n\u003cli\u003eAccepts Nikon F-mount lenses without an adapter\u003c\/li\u003e\n\u003cli\u003eCIPA battery life of 1550 shots \u003c\/li\u003e\n\u003cli\u003eSupports optional TTL strobe flash by electrical sync cord\u003c\/li\u003e\n\u003cli\u003eCompatible with optional external viewfinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eErgonomics and handling\u003c\/h2\u003e\n\u003cp\u003eGood ergonomics are critical when you need to concentrate on composition, focus, and proper exposure. Large, curved control levers put the most important controls right where you need them: shutter and AE-L\/AF-L. This combination allows you to shoot with or without back button focus, an advanced technique that is useful for tack sharp focus of super macro and fast-moving subjects. Each lever can be extended using the optional Shutter Trigger Extension # 4077.93 for perfect spacing when using a right-hand handle.\u003c\/p\u003e\n\u003cp\u003eThe command dial, mode, power, live view switch, and lens release controls are all operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user-serviceable and adjustable in a pinch.\u003c\/p\u003e\n\u003cp\u003eAll rear camera buttons are accessible by smooth action, corrosion-proof acetal push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the simple, rotation-free attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-double-handle-tray-for-compact-digital-housings\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTray with Dual Quick Release Handles # 9523.64\u003c\/a\u003e is the most popular choice for both handling and attachment of accessories.\u003c\/p\u003e\n\u003ch2\u003eSet-Up\u003c\/h2\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch2\u003eConfidence\u003c\/h2\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes. \u003c\/p\u003e\n\u003ch2\u003eVacuum Testing\u003c\/h2\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easy installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eVacuum Kit # 47012\u003c\/a\u003e. A vacuum kit allows you to draw a vacuum on the housing to check for leaks prior to entering the water.\u003c\/p\u003e\n\u003cp\u003eDrawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.\u003c\/p\u003e\n\u003ch2\u003eViewfinders\u003c\/h2\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. The included Super-eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. \u003c\/p\u003e\n\u003cp\u003eThis housing supports the use of optional Straight Enhanced Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3. These sophisticated high-performance viewfinders provide a larger, brighter view of the camera's viewfinder and are essential for super-accurate focus and framing. Either magnified viewfinder attaches and removes quickly and easily and is cross-compatible with a wide variety of interchangeable lens camera models.\u003c\/p\u003e\n\u003ch2\u003eLighting\u003c\/h2\u003e\n\u003cp\u003eLight is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away. For the best results, we recommend adding an external flash or high-powered constant-on light if you'll be diving regularly below 15' (3m).\u003c\/p\u003e\n\u003cp\u003eThis housing supports your choice of shooting manual strobes or adding TTL electronics.\u003c\/p\u003e\n\u003cp\u003eYou can enjoy the fastest and most accurate TTL exposure on the market by adding the \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-dl1-ds-link-nikon-ttl-converter-ikelite-nt3-hotshoe-kit\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDL1 DS Link Nikon TTL Converter Ikelite NT3 Hotshoe Kit # 46056\u003c\/a\u003e and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003cp\u003eReliable locking connectors between the hot shoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling. \u003c\/p\u003e\n\u003cp\u003eThe built-in flash is not usable in this installation. Triggering of fiber optic strobes is not supported at this time. A strobe must be connected by an electrical sync cord.\u003c\/p\u003e\n\u003cp\u003eA bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.\u003c\/p\u003e\n\u003cp\u003eThere is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results.\u003c\/p\u003e\n\u003ch2\u003ePort System\u003c\/h2\u003e\n\u003cp\u003eIt couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts ports from our DLM Port System to accommodate a selection of the best zoom, macro, and wide-angle lenses for underwater use. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.\u003c\/p\u003e\n\u003ch2\u003eDurability and corrosion-free performance\u003c\/h2\u003e\n\u003cp\u003eOur white ABS-PC blend housing provides strength and corrosion-free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for an enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200 ft (60m) depth rating\u003c\/p\u003e\n\u003cp\u003eDLM Type C port mount\u003c\/p\u003e\n\u003cp\u003eControls for all camera functions; access is not provided for Diopter Adjustment Control\u003c\/p\u003e\n\u003cp\u003eIkelite flash bulkhead connector with manual hot shoe\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded tray mounts with 3\" (76mm) spacing\u003c\/p\u003e\n\u003cp\u003eSlightly negative buoyancy in freshwater\u003c\/p\u003e\n\u003cp\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/p\u003e\n\u003cp\u003e2.8 lbs (1280 g)\u003c\/p\u003e\n\u003cp\u003e7.5 x 5.73 x 5.9 in (191 x 146 x 150 mm)\u003c\/p\u003e\n\u003cp\u003eABS-PC, acrylic, and acetyl construction\u003c\/p\u003e\n\u003cp\u003e2 year limited warranty\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear O-Ring # 0110 (installed)\u003c\/p\u003e\n\u003cp\u003eFront O-Ring # 0132.36 (installed)\u003c\/p\u003e\n\u003cp\u003eWaterproof bulkhead cap # 9104.7 (installed)\u003c\/p\u003e\n\u003cp\u003eSilicone lubricant 1cc tube\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eLens port sold separately; A compatible DLM lens port is required for waterproof operation.\u003c\/em\u003e\u003c\/p\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":15384426938411,"sku":"ike.6902.35","price":1195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6902.53-nikon-d5300-a_1024x1024_c15cfd1a-0fa3-4bb1-bb72-384dacb76aed.jpg?v=1574012474"},{"product_id":"ikelite-200dlm-c-underwater-housing-for-nikon-d5500-d5600-dslr","title":"Ikelite 200DLM\/C Underwater Housing for Nikon D5500, D5600 DSLR Cameras","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"product__description-label\"\u003eABOUT THIS PRODUCT\u003c\/h2\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eNikon's mid-range D5500 and D5600 DSLR cameras are great as a step up from a compact camera or to scale back from a full-frame system. The 200DLM\/C Underwater Housing is the perfect companion allowing the use of the Nikon D5500 and D5600 in or around the water for scuba, snorkeling, surf, pool, or any adventure.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cspan\u003eThis housing requires the addition of a compatible DLM Lens Port for waterproof operation. Lens Port not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch2\u003eAdvantages of the Nikon D5500, D5600 System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompact DSLR system is substantially smaller and lighter than most interchangeable lens cameras and housings\u003c\/li\u003e\n\u003cli\u003e24 megapixel still images and 1080p HD video\u003c\/li\u003e\n\u003cli\u003eAccepts Nikon F-mount lenses without an adapter\u003c\/li\u003e\n\u003cli\u003eCIPA battery life of 970 shots (D5600) \u003c\/li\u003e\n\u003cli\u003eSupports optional TTL strobe flash by electrical sync cord\u003c\/li\u003e\n\u003cli\u003eCompatible with optional external viewfinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eErgonomics and handling\u003c\/h2\u003e\n\u003cp\u003eGood ergonomics are critical when you need to concentrate on composition, focus, and proper exposure. Large, curved control levers put the most important controls right where you need them: shutter and AE-L\/AF-L. This combination allows you to shoot with or without back button focus, an advanced technique that is useful for tack sharp focus of super macro and fast-moving subjects. Each lever can be extended using the optional Shutter Trigger Extension # 4077.93 for perfect spacing when using a right-hand handle.\u003c\/p\u003e\n\u003cp\u003eThe command dial, mode, power, live view switch, and lens release controls are all operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user-serviceable and adjustable in a pinch.\u003c\/p\u003e\n\u003cp\u003eAll rear camera buttons are accessible by smooth action, corrosion-proof acetal push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the simple, rotation-free attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-double-handle-tray-for-compact-digital-housings\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTray with Dual Quick Release Handles # 9523.64\u003c\/a\u003e is the most popular choice for both handling and attachment of accessories.\u003c\/p\u003e\n\u003ch2\u003eSet-Up\u003c\/h2\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch2\u003eConfidence\u003c\/h2\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes. \u003c\/p\u003e\n\u003ch2\u003eVacuum Testing\u003c\/h2\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easy installation of the optional \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-vacuum-kit-for-1-2-inch-holes\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVacuum Kit # 47012\u003c\/a\u003e. A vacuum kit allows you to draw a vacuum on the housing to check for leaks prior to entering the water.\u003c\/p\u003e\n\u003cp\u003eDrawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.\u003c\/p\u003e\n\u003ch2\u003eViewfinders\u003c\/h2\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. The included Super-eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. \u003c\/p\u003e\n\u003cp\u003eThis housing supports the use of optional Straight Enhanced Magnified Viewfinder # 6890.2 or 45° Magnified Viewfinder (Type 3) # 6891.3. These sophisticated high-performance viewfinders provide a larger, brighter view of the camera's viewfinder and are essential for super-accurate focus and framing. Either magnified viewfinder attaches and removes quickly and easily and is cross-compatible with a wide variety of interchangeable lens camera models.\u003c\/p\u003e\n\u003ch2\u003eLighting\u003c\/h2\u003e\n\u003cp\u003eLight is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away. For the best results, we recommend adding an external flash or high-powered constant-on light if you'll be diving regularly below 15' (3m).\u003c\/p\u003e\n\u003cp\u003eThis housing supports your choice of shooting manual strobes or adding TTL electronics.\u003c\/p\u003e\n\u003cp\u003eYou can enjoy the fastest and most accurate TTL exposure on the market by adding the \u003ca href=\"https:\/\/reefphoto.com\/products\/ikelite-dl1-ds-link-nikon-ttl-converter-ikelite-nt3-hotshoe-kit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDL1 DS Link Nikon TTL Converter Ikelite NT3 Hotshoe Kit # 46056\u003c\/a\u003e and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003cp\u003eReliable locking connectors between the hot shoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling. \u003c\/p\u003e\n\u003cp\u003eThe built-in flash is not usable in this installation. Triggering of fiber optic strobes is not supported at this time. A strobe must be connected by an electrical sync cord.\u003c\/p\u003e\n\u003cp\u003eA bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.\u003c\/p\u003e\n\u003cp\u003eThere is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results.\u003c\/p\u003e\n\u003ch2\u003ePort System\u003c\/h2\u003e\n\u003cp\u003eIt couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts ports from our DLM Port System to accommodate a selection of the best zoom, macro, and wide-angle lenses for underwater use. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.\u003c\/p\u003e\n\u003ch2\u003eDurability and corrosion-free performance\u003c\/h2\u003e\n\u003cp\u003eOur white ABS-PC blend housing provides strength and corrosion-free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for an enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/p\u003e\n\u003ch2\u003eMade in the USA \u003c\/h2\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eDifferences in lens and control placement prevent other Nikon cameras from being used in this housing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis housing is only compatible with the Nikon D5500 and D5600 cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e200 ft (60m) depth rating\u003c\/p\u003e\n\u003cp\u003eDLM Type C port mount\u003c\/p\u003e\n\u003cp\u003eControls for all camera functions; access is not provided for Diopter Adjustment Control\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncluded Ikelite ICS-5 bulkhead connector with a manual hot shoe for the reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded tray mounts with 3\" (76mm) spacing\u003c\/p\u003e\n\u003cp\u003eSlightly negative buoyancy in freshwater\u003c\/p\u003e\n\u003cp\u003eActual buoyancy varies depending on the choice of lens and port\u003c\/p\u003e\n\u003cp\u003e2.8 lbs (1295 g)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e7.5 x 6 x 6.25 (190 x 152 x 159 mm)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eABS-PC, acrylic, and acetyl construction\u003c\/p\u003e\n\u003cp\u003e2 year limited warranty\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eHousing\u003c\/p\u003e\n\u003cp\u003eRear O-Ring # 0110 (installed)\u003c\/p\u003e\n\u003cp\u003eFront O-Ring # 0132.36 (installed)\u003c\/p\u003e\n\u003cp\u003eWaterproof bulkhead cap # 9104.7 (installed)\u003c\/p\u003e\n\u003cp\u003eSilicone lubricant 1cc tube\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eLens port sold separately; A compatible DLM lens port is required for waterproof operation.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ikelite","offers":[{"title":"Default Title","offer_id":15384472420395,"sku":"ike.6902.56","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2599\/6382\/products\/6902.56-nikon-d5600-a_1024x1024_7a9726ea-73e6-4897-9203-9743fe7d94da.jpg?v=1574012474"}],"url":"https:\/\/reefphoto.com\/collections\/ikelite-housings.oembed?page=4","provider":"Reef Photo \u0026 Video","version":"1.0","type":"link"}