Nauticam 20mm Tray Extension for Flexitray

Nauticam 20mm Tray Extension

The Nauticam 20mm Tray Extension adds 20mm to the length of the Flexitray, moving the handle 20mm farther from the camera housing.  The extension is not compatible with the Easitray.

A 30mm extension is also available.

The extension is manufactured with the same high-quality materials as Nauticam trays.

Installing the Nauticam Tray Extension requires a 3mm hex wrench:

The Flexitray	Remove handle bracket and handle
These two bolts will be used in the same position	The threaded plate is also kept.
Place the tray over the threaded plate. Let gravity assist you in the next step.	Use the two new bolts (included) to secure the extension to the tray.
Tighten snugly.	Attach the handle to the extension using the two oritinal bolts.

The extension may also be used with the Nauticam Adjustable Right Handle.  Installation follows the same process shown above.  Here is the handle is shown with the 30mm extension installed.